Alan, I have two of the 3/65 pumps so I just sent you a PM with my contact information.
-Fred-
Alan, I have two of the 3/65 pumps so I just sent you a PM with my contact information.
-Fred-
Gary, I just sent you a test PM.
-Fred-
Brant, Thank you for your response however the email server in this forum is down so none get through. I just sent you a PM with my contact information.
-Fred-
The tags with the key code are metal and come on all NOS sets and single locks. Ford did not use the paper tags. Those are usually done by the dealer to keep track of the keys in their key racks. I may even have some extra metal tags if you are just gong for the tag look. Nobody will check the code to see if it actually matches your key. ![]()
-Fred-
Larry, I just responded to your PM.
-Fred-
I just received a PM from someone else so it must be working.
-Fred-
Brant, I have an 8/64 rebuilt Hipo water pump. The closest that I have to a 7/65 is a 3/65.
What casting number and date code are you looking for on the timing cover?
-Fred-
This is a subject with which I am all too familiar. The arm that you seek will be very, very tough to find and you can read about in my posts on the Restoration topic of this forum. I have attached a link below:
http://www.hipomustang.com/hpmx/topic.asp?TOPIC_ID=7661
I was unable to find cores much less any parts for this project so this one will be tough. I figure that the dimple in the arm can be made and I have devised a way to do that. The arm is a trick in itself to remove and I made some special tools to facilitate that so as not to damage the pump. Some are easier to remove than others. If you send me your complete pump and spring I can get this done for you while I still have a proper sample arm to work with.
-Fred-
I just checked with the seller and everything listed goes with the car.
-Fred-
The normal key ring is just the cheap wire ring that comes on the lock and key sets today. They would have the metal tags on them for the key codes although some dealers would have deleted them as they were also entered in the original owners manual when the car was delivered to the customer. Some dealers, of course, had their own key rings and key fobs advertising their dealership. I have a dealer special made one from a Ford dealer when my parents bought a new 1960 Ford station wagon.
-Fred-
Larry, I just sent you a PM.
-Fred-
Considering that the seller was stuck on the 30K price for so long, I am surprised that they did not put a reserve on the auction. The seller is a dealer and they must have just needed the money. The highest previous offer was only $17K. Being as we never saw any underside pictures, we really have no basis for comparison on the value.
-Fred-
I wish you the best on this Kar, Duncan. I saw your post under the K Mustangs topic regarding this Kar.
-Fred-
Listed on Ebay by tajaguar, who is a member here:
http://cgi.ebay.com/ebaymotors/ws/…3AVRI&viewitem=
-Fred-
This Kar was finally sold for $19,100 when the seller listed it at no reserve. It had always been listed at $30,000 and was not moving. The seller now knows for sure where the market is on this Kar.
http://cgi.ebay.com/ebaymotors/ws/…3AVRI&viewitem=
-Fred-
I have an NOS one that I am willing to sell for $99.00.
-Fred-
That is a great article and seems to be right on the mark!! Congratulations to everyone that helped bring the project to fruition.
-Fred-
I like the new angle for the shot of the Kar.
-Fred-
Great looking Kar, Larry. Welcome to the site.
-Fred-