Jim, another post regarding the tube dimensions was made by Don and the link is below:
http://www.hipomustang.com/hpmx/topic.asp?TOPIC_ID=8992
-Fred-
Jim, another post regarding the tube dimensions was made by Don and the link is below:
http://www.hipomustang.com/hpmx/topic.asp?TOPIC_ID=8992
-Fred-
The results were finally posted this morning and this Kar was bid to $70K and did not meet reserve at this latest Mecum auction.
-Fred-
Rick, I just sent you an email on these.
-Fred-
Eddie, I just sent you an email.
-Fred-
Wally, that one on Ebay is the earlier screw together type and not what you are looking for.
-Fred-
I have seen this Kar posted here previously. I am almost positive that the link below is this Kar although the Ebay auction links are now dead. The link even mentions that the Kar was going to auction in January of 09.
http://www.hipomustang.com/hpmx/topic.asp…rchTerms=5f08k1
The Mecum site has not posted the results as yet and the auction lot number is S70.
-Fred-
Troy, Sorry for the confusion on this. Of course a convertible could have a factory pony interior. I have had a few of them myself. It just would not be factory pony interior with a 76A body style. It would need to be a 76B as yours is.
-Fred-
Zed, Both types of U-joints fit the proper yoke.
-Fred-
The 76A body style eliminates the possibility of the Kar having a pony interior from the factory.
-Fred-
I just sent you a PM on this.
-Fred-
The styled steel wheel uses a longer hold down bolt. I am pretty sure that the hold down plate used is a smaller diameter version. I have the smaller plate on mine but I am unsure if that applied to all of these or if there was a possible production date change. Perhaps Charles can chime in on this.
-Fred-
The seller has now withdrawn the auction from Ebay as no longer available.
-Fred-
Tim, I just sent you an email on this.
-Fred-
Mel, I just sent you an email.
-Fred-
Zed, Some of the standard 1965 289 Mustangs used the Ford style (outside clips) U-joints with the numbers you gave of C3AZ 4635 C (front) and C3AZ 4635 D (rear) however most of the standard 1965 289 Mustangs used the mechanics type (inside clips) with numbers of C5DZ 4635 B (front) and C5DZ 4635 A (rear). The Hipo cars all called out for the mechanics type (inside clip) C5DZ U-joints. This is according the 1965/72 Ford Master Parts Catalog. The C5DZ U-joints do fit the C3AZ 4851 L yoke.
-Fred-
Welcome to the forum. I hope that your deal works out for you.
The block should be black.
-Fred-
Bob, It is great that you are so on top of things like this with the Fairlanes. The hobby really needs more people like you for this kind of thing.
-Fred-
Shelby came up with a lower pulley that fit inside the original single groove pulley to run the A/C belt. The factory A/C pulley was only a 3 groove and the outer part sleeve made it too large in diameter. By coming up with a pulley that fit internally, the problem was solved. A friend of mine has one of those pulleys and it is aluminum and looks strange because it is so deep. It appears to me like the pulley was from some aftermarket A/C system that was available at the time. It is pretty crudely finished.
-Fred-
I have run into this problem before myself. I have found that loosening the manifold and lifting it up and then retightening it works the best. The problem begins when somebody puts the manifolds on and just lets them hang from the bolts when they tighten them. I let them hang all of the time on other engines and the Hipos are the only ones that I have experienced this problem with.
-Fred-
67 manifolds are clearanced for thermactor tubes even though most 67 Hipos did not have the system. The 67 uses a C7ZZ 5246 H pipe and I believe that the pipes are longer than the early Kars however there may be some other difference.
-Fred-