Posts by C6ZZKGT

    The only one piece Hipo emblems that I have ever seen were repros for 63 and 64 Fairlanes. The originals, of course, were two piece.


    Speaking of 63 and 64 Hipo emblems, I have a VHS video of old Ford TV ads when the Mustang first came out and it had the 63 and 64 Fairlane version of the Hipo emblems on the cars. These, of course, were preproduction cars.


    -Fred-

    Ralph, Just to clarify a little more on my end.


    If you were able to get the current type double roller chain assembly with the hatchet in the timing cover with the cam sprocket spacer, I agree that the chain would line up. The extra width of the lower sprocket will move the balancer out the equivalent amount making the lower crank pulley further out than the water pump pulley. The only good way to correct that would be to take the extra amount off of the snout of the balancer where it mates to the lower sprocket. All of this is a moot point though because the fuel pump eccentric runs very close to the timing cover in the standard configuration and could not take the extra spacing forward. I just looked at one of my assembled engines with the fuel pump off to verify this.


    -Fred-

    If you were able to space the cam sprocket out the thickness of the hatchet, which I think will not be compatible with the fuel pump arm, your next problem would be that you would need to remove an equal amount from the snout of the balancer to get the pulleys back in line.


    -Fred-

    Gary, You have a C6ZZ 5230 E and you need a C6ZZ 5230 F. In 1984 you had just missed the left side going obsolete. I had ordered a pair in, I believe, December 1983 and got them. This was the last order from Ford for the year. In January I ordered another pair for the first Ford order of the year and the left side had gone obsolete over the Christmas holiday. I called a friend of mine at the Ford national parts distribution center and explaned my problem to him. He said that he would ship me any that he could find. He ended up shipping me 14 left sides. Then I ordered the matching right sides as they were still available. I actually ordered another 6 extra right hand sides with the intention of using the mufflers and resonators by making new pipes for the left side. At least that way they would sound right. I then approached Arvin to see if they would make more left hand sides. It took a lot of calls to get to the right person at Arvin as they were spread out over several states. I was finally successful and they agreed to work me up a price on them. A few days later my Ford rep showed up and asked me if I still wanted Arvin to make them. I thought that I had bypassed Ford with this but my Ford rep explaned to me that if something was getting a Ford logo that Ford would be involved. He gave me the price and althouigh it was less than the current Ford cost on the right side, the shear volume necessary for the order stopped me. I had to buy a minimum of 250 units and they were FOB Indiana as I recall and I was in California. At the time it was over $25,000 and that was a huge nut for me to crack so I had to pass on the deal. This disproves the theory that was related to you about a broken jig as Arvin did not have a problem making them if I wanted them.


    -Fred-

    Most of the originals had numbers of C4ZB-16C236-A, FoMoCo in script inside an oval and FOX CO all cast into the reverse side. The earlier Ford service parts had this as well. As time went on the logos and numbers were far less pronounced and in the later Ford service parts, disappeared altogether. I have NOS ones of all of the different stages of manufacture.


    -Fred-

    The $6,599 bid was on the first time around on Ebay. The seller had a Buy-It-Now of $8,800 and most likely the seller thought that they could get close to that for the car. Being as the $6,599 bid did not meet the reserve, neither the seller nor the buyer are obligated to complete the deal. The seller most likely still thought that they could get more so they probably did not offer the high bidder a second chance offer and just relisted it with a lower Buy-It-Now or make offer auction. It is also possible that the high bidder thought better of his bid and was relieved to have not met the reserve.


    -Fred-