Relisted again: Buy It Now of $41k or "Make Offer"
http://cgi.ebay.com/ebaymotors/ws/…K%3AMEWAX%3AVRI
-Fred-
Relisted again: Buy It Now of $41k or "Make Offer"
http://cgi.ebay.com/ebaymotors/ws/…K%3AMEWAX%3AVRI
-Fred-
Troy, Congratulations on winning your class.
The fog light switch mounted on the underside of the dash is correct until around June 1, 1965 when it was moved further up the dash. When it was mounted under the dash it was held in place by a large hexagonal nut.
-Fred-
I agree with Charlie on his observations.
-Fred-
Here is an update on the current fuel pump processing. I have removed the arms and related pieces from the pumps prior to taking them to the rebuilder. I took the pumps to the rebuilder for disassembly 3 weeks ago. I was surprised that they were not available to be picked up sooner. I just now called them and they are now ready for me to pick up which I will do tomorrow. They will then need to have the castings cleaned and the tin and arms replated. I will then take them back to the rebuilder for reassembly. When they are done I will pick them up and bring them back to my place to reinstall the arms and springs. They are then boxed and shipped to everyone.
-Fred-
I have had these in a couple of rear ends that I have had. I currently have one in an early 66 9 inch Mustang housing. It is a Ford part number of B9A 4159 A which is listed as a lubricator and applies to locking axles only.
-Fred-
David, the most logical reason for the VIN to be missing on the left front apron is when it has been replaced due to damage of some sort. A close inspection of the front end would be in order as the core support would also most likely have been replaced if the Kar was hit hard in that corner. There are no engine compartment pictures in the auction that will help to make any determinations. It is good that the seller has included pictures of the normally hidden VINs to help verify the Kars authenticity.
-Fred-
Eric, You can delete your own post by clicking on the trash can above your post.
-Fred-
Welcome to the forum, Jerry.
-Fred-
Back on Ebay again. The starting bid price has been raised from $15,000 to $17,500 with a Buy-it-now of $26,500. The previous auction had only a single bid of $15,000 so I do not understand how raising the starting bid will help them.
http://cgi.ebay.com/ebaymotors/ws/…3AVRI&viewitem=
-Fred-
Rick, Here is a link to all of the days. You have to register online with Mecum to get the pricing. It is free to register with Mecum.
http://www.mecum.com/auctions/consi…&consignday=All
-Fred-
I agree with Karl on his observation of the plate. It also appears that the choke cable comes through the firewall underneath the master cylinder somewhere.
-Fred-
It sits too high for my taste. Maybe the original springs have been changed.
-Fred-
Back on Ebay again with a starting price of $25K:
http://cgi.ebay.com/ebaymotors/ws/…3AVRI&viewitem=
-Fred-
What date code do you need?
-Fred-
Jeff, I have the "Mustang Does It" book and yes it does have production figures in the back of it. The figures are broken down by year, model and body style code only. It also includes Shelbys. These are the same figures that I have seen for many years. There is no breakdown by engine, trans or color as Jim is looking for. I have never seen anything on these other items.
I used to give away the "Mustang Does It" book when I was a parts manager and a customer bought over $1,000 in Mustang parts at one time. That did not really amount to a whole lot of parts even in the 80's.
-Fred-
It appears that none of the issues mentioned in the previous posts on this Kar have been corrected.
-Fred-
I just sent you a PM.
-Fred-
What date code block do you need?
-Fred-