What is the thickness of the spacer?
-Fred-
What is the thickness of the spacer?
-Fred-
Tim, The 67 driveshaft is 19/64" longer than the same one for 66 with a C4. The driveshaft also differs in the style of U-joint between the two years.
-Fred-
Charles, The C8ZF-E number is not in the Ford MPC.
-Fred-
Great looking Kar, Mark!!!
-Fred-
Looking very good!!
-Fred-
Welcome to the forum David.
-Fred-
I have the fuel pumps back from the rebuilder in their disassembled condition. The tin parts are ready to go to the plater on Monday and the castings are in the cleaning process right now. As soon as the plating is done I will be taking the pieces back to the rebuider for reassembly. I will then need to make another trip back to the rebuilder to pick up the assembled pumps. I then bring them back to my place to reattach the arms, box them and ship them.
-Fred-
Russell, I just sent you a PM on your Hipo water pump.
-Fred-
If this was a factory GT, why would this car have a 66 standard instrument bezel and a 65 standard non GT glove box door? The productionn date is also too early for a factory GT. The seller only states that it is a Mustang GT though and does not state that it is a factory GT.
-Fred-
Back on Ebay again at $59,000 or make offer.
http://cgi.ebay.com.au/ws/eBayISAPI.d…em=220435795955
-Fred-
Welcome to the forum, Tom. Your enthusiasm is a great thing to have when doing a restoration.
-Fred-
The pivot mounts as you have it shown in the picture.
-Fred-
The seller has made a reasonable drop in price. I am not sure how the Aussie dollar compares to US dollars at this time. I believe that the price is becoming more comparable to US asking prices now though.
-Fred-
Great historical pictures!
-Fred-
Robert, Are these the mounts you are talking about? These are for an early Fairlane and only the top brackets are correct for a Mustang.
http://cgi.ebay.com/ebaymotors/ORI…sQ5fAccessories
-Fred-
Terry, If you really want the correct NOS originals, I can come up with them. I have always used standard seals with no issues. Your only concern would be to make sure that the seals that you use clear the inner harmonic suppressor valve spring that the Hipo has and standard engines do not.
-Fred-
Mark, Is this a manual or automatic trans car?
-Fred-
Jack, You can delete your posts here by clicking the trash can icon at the top of your post.
-Fred-
63, 64, 65 and 66 valve stem seals are Hipo specific with a part number of C3OZ 6571 B. The 67 Hipo only version is a C3OZ 6571 C. Surprisingly enough Ford did not list either a valve gring gasket set or a complete engine gasket set for a Hipo for any year.
-Fred-
Welcome to the forum, Jack!!
-Fred-