That sure is a new one on me. It is interesting that the letters are a different size from the numbers. The number three is not of the normal stamping either as they are usually rounded at the top.
-Fred-
That sure is a new one on me. It is interesting that the letters are a different size from the numbers. The number three is not of the normal stamping either as they are usually rounded at the top.
-Fred-
Welcome to the site, Jay. I am sure that you will find many helpful people here.
-Fred-
Dave, Great story!!! Welcome to the forum.
-Fred-
Kenyon, First check to make sure that your head gaskets are installed correctly. If they are installed correctly you will see a small squared off tab of the head gasket sticking out of the front outer corner part of the head between the lower front bolt and the front of the head. If you do not see this tab, the gaskets are on backwards. If they are the coolant does not flow properly through the heads or the block. This problem is not all that uncommon.
-Fred-
Troy, Do not jack up the car and remove the front wheels as the shocks are what limits the front end travel. It will be easier to do on the ground as two of the lower nuts are also in a bad area with the front end hanging.
-Fred-
Craig, I have sent you both an email and a PM.
-Fred-
Welcome to the forum, Mike. Some pictures of your stable would be nice.
-Fred-
Quote from Craigs List site regarding this car. "This posting has been deleted by its author."
-Fred-
Back on Ebay again with a starting bid of $15,000 and a lower Buy-It-Now of $24,500.
http://cgi.ebay.com/ebaymotors/ws/…K%3AMEWAX%3AVRI
-Fred-
I have had the same Konis on my Kar for over 25 years and I am very satisfied with them. They are the only shocks that I have had that held up for such a long period of time and are still doing their job as they did when new. The extra money was well spent in my view.
-Fred-
I have well over 200 of the C3OZ 6513 A NOS valve springs and I rechecked more of them. I originally only checked the first one out of the box as I figured that they would all be the same. I have found a variance of from 2.040 to 2.068.
-Fred-
The freestanding dimension on my NOS springs is 2.068. They are also red in color. It is probable that used ones will be shorter.
-Fred-
The outer diameter is 1.438. The inner diameter is 1.016 without measuring the inner damper spring. With the inner damper spring it is .952.
-Fred-
Back on Ebay again with a lower starting price of $10,000 due to the seller figuring out that there was more rust than previously thought. This Kar is listed with no reserve:
http://cgi.ebay.com/ebaymotors/ws/…K%3AMEWAX%3AVRI
-Fred-
I just sent you an email on this.
-Fred-
Bo, when everything was new from Ford I would agree that exchanging one balancer for another would be acceptable. The problem is that 45 years later many of the original balancers have been precision balanced to a particular assembly. Many times the balance people eliminate the extra counterweight (hatchet) for a Hipo and adjust the balance with the harmonic balancer. This would make for a problem when exchanging one balancer for another. That is why I made the suggestion to match balance the harmonic balancers.
-Fred-
It is possible to get the new balancer match balanced to the old one. Just speak with a qualified balancing shop.
-Fred-
The only original application for your 3732-S pump is a 63 Fairlane with a 221 or 260 engine and an oil pressure gauge. It will, of course, fit other applications but will not be the original for them.
-Fred-
Back on Ebay again with a slightly lower Buy-It-Now of $35,795:
http://cgi.ebay.com/ebaymotors/For…5fCarsQ5fTrucks
-Fred-