Posts by C6ZZKGT

  • Used Disc Brake Caliper Bracket

    Here is an Ebay auction for a pair of used disc brake caliper brackets by Ebay member "magmustangs" with a Buy-It-Now of $199.00:

    1965-1967 Ford Mustang, Fastback, Coupe, Convertible, GT, GTA, Shelby GT-350, GT-500, Mercury Cougar, GT, 6.5 Litre, XR7.. LH+RH Front Disc Brake Caliper To Spindle Mounting Brackets. For the Early 4-Piston Disc Brake Calipers. .. These are ORIGINAL FORD PARTS. Removed from a 66 Mustang GT with Factory Disc Brakes. Have K/H 54313-RH and K/H 54314-LH casting numbers. The Caliper Brackets are in Great Condition. No heavy Rust or metal pitting. No cracks or fractures. They are factory straight. Not bent or warped. All of the threads seem good. Overall, this is a Great Pair of Original LH+RH Disc Brake Caliper Brackets...

    https://www.ebay.com/itm/1632182060…e=STRK:MEWAX:IT

    -Fred-

  • NOS C5OZ 7515 B Clutch Fork

    Here is an Ebay auction for an NOS C5OZ 7515 B clutch fork by Ebay member "auntiek351" with a Buy-It-Now of $149.99:

    This is a NOS New Original Ford CLUTCH FORK for a 1965 1966 1967 Shelby GT350 Mustang Fairlane Falcon Comet 289 289HIPO Hi-performance Special V8 with 3 or 4 speed manual transmission. It is Ford part number C5OZ-7515-B and it includes a new retaining spring that connects the fork to the clutch pivot. It has been Obsolete from Ford for many years and is difficult to find. You can't go wrong with new original Ford parts. Buyer to pay Priority Mail shipping. We accept Paypal and Visa, Mastercard, Discover and American Express. If you need any other 4 speed and clutch linkage parts or have any questions please contact us at 609-448-1684 from 10am to 6pm Eastern time. Thank-you and Happy Ebaying! (121818)

    https://www.ebay.com/itm/3921961684…e=STRK:MEWAX:IT

    -Fred-

  • NOS C2OZ 6384 B Flywheel Ring Gear

    Here is an Ebay auction for an NOS C2OZ 6384 B flywheel ring gear by Ebay member "cobranda" with a Buy-It-Now of $138.00:

    A CONCOURS RESTORATION / REPLACEMENT NOS FORD:
    64 1/2-67 MUSTANG V8 & 65-67 SHELBY GT350 4-SPEED
    MANUAL TRANSMISSION 157 TOOTH FLYWHEEL RING
    GEAR
    THIS 1 NOS FORD FLYWHEEL RING: 64 1/2-67 MUSTANG V8 & 65-67 SHELBY GT350 4
    -SPEED MANUAL TRANSMISSION 157 TOOTH FLYWHEEL RING GEAR PICTURED, IS the 1
    NOS FORD - MUSTANG 4-SPEED 157 TOOTH FLYWHEEL RING GEAR you WILL RECEIVE

    *** A GENUINE NOS FORD: 64 1/2-67 MUSTANG V8 &
    65-67 SHELBY GT350 4-SPEED MANUAL TRANSMSSION
    FLYWHEEL RING GEAR!!!***

    https://www.ebay.com/itm/2327779944…e=STRK:MEWAX:IT

    -Fred-

  • Hipo Carburetor Booster

    Here is an Ebay auction for another used secondary carburetor booster by Ebay member "magmustangs" with a Buy-It-Now of $199.00:

    1963-1967 Ford Mustang, Shelby GT350, Fairlane, Mercury Comet. Original 289 HIPO Autolite 4V Carburetor SUPPORT - Secondary BOOSTER VENTURI. This is an ORIGINAL FORD PART. Has BA marking. Looks Good. No guarantees on working condition. No visible damage. .

    https://www.ebay.com/itm/1532242420…e=STRK:MEWAX:IT

    -Fred-

  • Hipo 4 Speed Flywheel

    Here is an Ebay auction for a used Hipo 4 speed flywheel by Ebay member "magmustangs" with a Buy-It-Now of $699.00:

    1963-1966 Ford Mustang, Fastback, Coupe, Convertible, GT, Shelby GT350, Cobra, Fairlane, 500.. 4 SPEED MANUAL TRANSMISSION FLYWHEEL For 289 HIPO Engine and 10.5" Clutch. 160 TOOTH Ring Gear. This is an ORIGINAL FORD PART. Casting Number (FoMoCo) C3OE-6380-B and dated [4K9]. Removed from a 65 Mustang with 289 HIPO and 4 Speed. This has the original Orange paint daub, which is fading, and also has the Brinnell hardness test mark. . The Flywheel is in Great Condition.. The Clutch Surface Looks Fine. You should have the surface cleaned-roughed up before installation at a minimum. It is 50+ years old and so it might need turned-resurfaced. It does show some stress marks because it is an old original. If you have high expectations for a perfect original flywheel then please pass this one by. No Guarantees on this flywheel. No heavy wear. No Rust anywhere. Has Great Metal. There is some wear on the ring gear teeth. The ring can be replaced or turned around. Has a Natural Metal Finish. . Overall this is a Great Original 289 HIPO Flywheel. IMPOSSIBLE TO FIND ORIGINAL.

    https://www.ebay.com/itm/1531851376…e=STRK:MEWAX:IT

    -Fred-

  • NOS C3DZ 8146 D Radiator Fan Shroud

    Here is an Ebay auction for an NOS C3DZ 8146 D radiator fan shroud by Ebay member "galaxieperformance" with a Buy-It-Now of $174.99 or make offer:

    ONE NOS 63 64 65 66 Ford Falcon Mustang 260 289 A/C Fan Shroud #C3DZ-8146-D.See description for applications. Item as is: light shelf wear and surface scratches, light paint wear (see pictures). Confirm this item is compatible with your vehicle BEFORE purchasing.

    https://www.ebay.com/itm/2234529697…e=STRK:MEWAX:IT

    -Fred-

  • Used C3DZ 8146 D Radiator Fan Shroud

    Here is an Ebay auction for a used radiator fan shroud by Ebay member "magmustangs" with a Buy-It-Now of $199.00:

    1964.5-1966 Ford Mustang, Fastback, Coupe, Convertible, GT, Shelby GT350. 260-289 RADIATOR FAN SHROUD. For Cars with 260-289 and A/C-Air Conditioning Or 289 HIPO Engine.. This is an ORIGINAL FORD PART. Removed from a 65 Mustang Fastback with 289 Hipo. The Shroud is in Great Original Condition. It is very straight and very round. No cracks or splits. This is still in the factory finish but has surface discoloration all over. No real rust or metal pitting. this is a very solid shroud. Overall, this is a Great Original 260/289 A/C-Hipo Radiator Cooling Fan Shroud. IMPOSSIBLE TO FIND ORIGINAL.

    https://www.ebay.com/itm/1532148000…e=STRK:MEWAX:IT

    -Fred-

  • NOS C5ZZ 6038 A Motor Mount Insulator

    Here is an Ebay auction for a pair of NOS C5ZZ 6038 A Hipo motor mount insulators by Ebay member "orlandomustang1966" with a Buy-It-Now of $275.00:

    Fits Year (s): 1965-1966

    Description: Used set of Ford Mustang 289K Hi-Po or Shelby Motor Mounts or Rubber Insulators.

    Fits Model(s) & Type:


    Mustang / Fairlane
    Shelby
    289K Only
    Coupe
    Convertible
    Fastback


    Ford Part # C5ZZ-6038-A
    Eng # C4ZE-6038-A

    https://www.ebay.com/itm/2231428036…e=STRK:MEWAX:IT

    -Fred-

  • Used Rear Axle Housing

    Here is an Ebay auction for a used rear end axle housing by Ebay member "gt35067" with a Buy-It-Now of $2,500.00:

    This is an original axle housing from a 1966 K-code Mustang.

    This housing is in great shape.

    There is no major rust issues.

    The housing measures 52-3/8 inch long.

    It has the large hex bolt in the back with the L marking. There is also an L paint mark on the inside.

    There is some bumpy surface, but most of it appears to be slag specks from welding so it should be real easy to clean up.

    The perches have been moved closer together and reinforced. They now measure 37-1/2 from center to center. They will need to be moved back to 43" center to center to be correct for your mustang.

    I got this axle housing from an old time racer. He told me this axle originally came from a 1966 Mustang Group II race car. The original car was used as a parts car back in the 70's. I got several pieces from him that he said came from the original race car and his story seemed more real when he handed me a set of 31 spline axle shafts that he said were originally in this housing. 31 spline axles were only used in the Group II race cars.

    He also told me the axle perches were moved because he was planning to use the axle in a 1971 Maverick race car he was building back in the mid 70's, but ended up not using it. This axle housing has sat in his shop for the last 40 years.

    I will be posting the axle shafts and a few other parts in other auctions.

    https://www.ebay.com/itm/2632627258…e=STRK:MEWAX:IT

    -Fred-

  • Used Hipo and GT Front Sway Bar

    Here is an Ebay auction for a used front sway for Hipo and GT Mustangs by Ebay member "magmustangs" with a Buy-It-Now of $219.00:

    1965-1966 Ford Mustang GT, Fastback, Coupe, Convertible... Original 13/16" Front Stabilizer/Sway Bar With Mounting Brackets. For GT Package Or 289 HIPO Equipped Cars. . This is an ORIGINAL FORD PART. Removed from a 66 Mustang Fastback with 289 Hipo. . The Stabilizer Bar is Factory Straight and is in Excellent Condition. No heavy Rust or pitting. No gouges or scrapes in the metal. No visible wear in the bushing areas. The rubber needs to be replaced. No unnecessary bends.. Overall, this is an Excellent Original GT 13/16" Front Sway Bar. IMPOSSIBLE TO FIND ORIGINAL.

    https://www.ebay.com/itm/1530187030…e=STRK:MEWAX:IT

    -Fred-

  • Used Hipo Exhaust Manifold

    Here is an Ebay auction for a pair of used Hipo exhaust manifolds by Ebay member "gt35067" with a Buy-It-Now of $1,200.00 or make offer:

    This is a pair of original 289 HIPO exhaust manifolds.

    I listed them as used because I am not 100% sure they are NOS so look at the pictures closely and decide for yourself.

    They do look like they were painted once at some point.

    I can see where there was a gasket mounted up against the exhaust ports and I can see where there was some bolts installed so they have clearly been on a motor, but it doesn't look like they have ever had exhaust flowing through them.

    The bare metal areas still look virgin with only a little surface rust starting (see pictures).

    I put my finger in a few of the exhaust ports and I got no carbon on my finger tip.

    Exterior wise they look beautiful with no pitting to speak of. Only light surface rust hear and there.

    The date code on the backside of the passengers side looks to be 5-15-5 (May-15th-1965).

    The date code on the drivers side is not completely clear, but I can make out 27-5 (month unknown-27th-1965).

    Overall a super nice pair of exhaust manifolds.

    Box size 21x14x14 with a weight of 32 lbs.

    https://www.ebay.com/itm/2535472791…e=STRK:MEWAX:IT

    -Fred-

  • NOS C5ZZ 6038 A Motor Mount Insulator

    Here is an Ebay auction for one NOS C5ZZ 6038 A Hipo motor mount insulator by Ebay member "magmustangs" with a Buy-It-Now of $199.00:

    1964.5-Early1966 Ford Mustang, Fastback, Coupe, Convertible, GT, Shelby GT350... NEW-OLD-STOCK 289 HIPO Motor Mount Insulator. Correct For LH or RH Side. This is an ORIGINAL FORD NOS PART. The rubber has molded C4ZA-6038-A (FoMoCo) and C5ZZ-6038-A numbers. This Insulator is Brand New-Original Ford. Ready To Install. Impossible to Find NOS for 289 Hipo.

    https://www.ebay.com/itm/1631379454…e=STRK:MEWAX:IT

    -Fred-

  • Used C3OZ 6A360 A Counterweight

    Here is an Ebay auction for a used Hipo counterweight by Ebay member "magmustangs" with a Buy-It-Now of $169.00:

    1963-1967 Ford Mustang, GT, Shelby GT350, Cobra, Fairlane, 500. 289 HIPO CRANKSHAFT COUNTERWEIGHT-HATCHET. This is an ORIGINAL FORD PART. Removed from a 67 Shelby Mustang GT350 with 289 Hipo. . The Counterweight is in Great Original Condition. I have left it in as found condition. It has a little surface stuff but No Metal Pitting or Heavy Rust. It will clean up to look very nice. No cracks or splits. Not bent or damaged. Overall, this is a Great Original 289 HIPO Crank Counterweight.. Impossible To Find Original.

    https://www.ebay.com/itm/1532031748…e=STRK:MEWAX:IT

    -Fred-

  • Used C4ZA 5230 N Hipo Transverse Muffler

    Here is an Ebay auction for a used C4ZA 5230 N transverse Hipo muffler by Ebay member "acond" with a Buy-It-Now of $899.99:

    This is an old NOS Ford muffler and tail pipes assembly which is correct for 1964 1/2, 1965 and early1966 Mustang models with the hipo engine. Will not fit the standard 4V engine. See photos for description. No dents and no damage. The C4ZA 5230 N stamping is the engineering number of course. Don't miss this opportunity as you probably won't see another for sale ever.

    https://www.ebay.com/itm/1125515997…e=STRK:MEWAX:IT

    -Fred-