Posts by C6ZZKGT

Quote from Charlie Buhl

For everyone's info, Richard Porter recently installed the Waldron-made Arvinode concours exhaust system on my early '65 K fastback. Interesting that previous posts here suggested the Arvinode was "quieter". My car sounds "good and loud", especially wound thru the gears! I would recommend the Arvinode pipes to anyone whose car fits the timeline in which they were used. They were installed about six months ago -- I still visit the garage a couple times a week just to start it and listen when I don't have time or weather won't let me drive it. Sounds like the hot rods that snapped my young head around to look when I was 3-4 years old. charlie

I am unclear as to who thought that the early Arvinode is quiet. Ford had so many noise complaints about the early Arvinode that Ford offered mufflers to cut down on the noise. The later Arvinode with actual resonators and mufflers that began around March 1965 is much quitter without any rapping. A friend of mine has the Waldron Arvinode of his early 65 Konvertible ,and yes it is loud, but it sounds great to my old school ears.

-Fred-

Quote from chucks302

Thanks Fred, I tried to post a picture in the scrap book section but no luck.

Try it in the Gallery at the top of the home page and let me know if it works. Niko set that up and I am unclear as to why.

-Fred-

Quote from chucks302

Im going to brag a little about my K coupe, my vin 159122 June 8th date code number three Kar in the 64.5 section of the registry, was printed on page 55 of March 2018 issue of mustang monthly in the hi po 289 article by Jim Smart .still driving and racing it at the local drag strips ya hoo.

Congratulations on getting some "ink" Chuck.

-Fred-

Here is an Ebay auction for an NOS C5AZ 6A666 A PCV valve by Ebay member "goochiksdaddy" with a Buy-It-Now of $300.00:

Up for sale is this vintage FoMoCo ‘65-66 Mustang K Code Shelby GT350 NOS PCV Valve part number C5AZ-6A666-A1. As this was in a box full of other NOS parts in my grandfather’s garage I am confident that this is as well, even though the part is a bit blemished. No questions asked refund and I will pay all shipping. At $300.00 I think that I have the best price on eBay right now

https://www.ebay.com/itm/Vintage-65…SgAAOSwwgBcV3N3

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for an NOS C5AZ 6A666 A PCV valve by Ebay member "swapr" with a Buy-It-Now of $379.99:

GARAGE CLASSICS is proud to offer you a NOS Fomoco Pcv valve.

Part # on box is C5AZ-6A666-A1.

Stamped CV666C

Very nice original.

Correct for 65 66 Shelby Mustang GT350.

NOS.

https://www.ebay.com/itm/65-66-Must…&orig_cvip=true

-Fred-

Display More

This NOS C5AZ 6A666 A PCV valve sold March 7, 2019 on Ebay for $341.99.

-Fred-

Here is an Ebay auction for an NOS C5AZ 6A666 A PCV valve by Ebay member "swapr" with a Buy-It-Now of $379.99:

GARAGE CLASSICS is proud to offer you a NOS Fomoco Pcv valve.

Part # on box is C5AZ-6A666-A1.

Stamped CV666C

Very nice original.

Correct for 65 66 Shelby Mustang GT350.

NOS.

https://www.ebay.com/itm/65-66-Must…&orig_cvip=true

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a used 5 bolt Hipo engine by Ebay member "fgautos" with a starting bid of $4,270.90:

Ford 289 Windsor 5 Bolt Hi Po Long Engine. C3AE-6015-N Block Casting. Block Date 3 D 26 . Heads are both 3 D 18 Casting Dates, Hi Po Main Bearing Caps are the there, Counter weight on the Crank is there, Hi Po Balancer is there. Heads are complete and in touched. Block is 30 tho oversize . No Distributor, Inlet Manifold or Carby, Fuel Pump or Exhaust manifolds.. Can crate for shipping.. Super Rare Engine..

https://www.ebay.com/itm/2541589812…e=STRK:MEWAX:IT

-Fred-

This used 5 bolt Hipo engine received no bids by March 17, 2019 and therefore did NOT sell.

-Fred-

Here is an Ebay auction for a used 5 bolt Hipo engine by Ebay member "fgautos" with a starting bid of $4,270.90:

Ford 289 Windsor 5 Bolt Hi Po Long Engine. C3AE-6015-N Block Casting. Block Date 3 D 26 . Heads are both 3 D 18 Casting Dates, Hi Po Main Bearing Caps are the there, Counter weight on the Crank is there, Hi Po Balancer is there. Heads are complete and in touched. Block is 30 tho oversize . No Distributor, Inlet Manifold or Carby, Fuel Pump or Exhaust manifolds.. Can crate for shipping.. Super Rare Engine..

https://www.ebay.com/itm/2541589812…e=STRK:MEWAX:IT

-Fred-

Quote from C6ZZKGT

This NOS crankshaft washer is back on Ebay with no changes:

https://www.ebay.com/itm/2642531122…em=264253112246

-Fred-

This NOS crankshaft washer received no bids by March 31, 2019 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

This used pair of 63-64 Fairlane High Performance emblems is back on Ebay again with no changes:

https://www.ebay.com/itm/2642531232…em=264253123236

-Fred-

This used pair of 63-64 Fairlane High Performance emblems received no bids by March 31, 2019 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

This used leaf spring shackle is back on Ebay again with no changes:

https://www.ebay.com/itm/2930219612…em=293021961242

-Fred-

This used leaf spring shackle received no bids by April 1, 2019 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

The part number that the seller states is incorrect and the Ford box is a C8SZ 6250 A which is for a standard 429 and 460 camshaft. The actual part does appear to be correct.

-Fred-

This NOS C3OZ 6250 C Hipo camshaft received no bids by April 1, 2019 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

Here is an Ebay auction for a pair of used Hipo chrome valve covers by Ebay seller "Shelbym350" with a starting bid of $225.00:

I have for sale an original pair of Ford 289 HIPO valve covers with original Ford cap. Chrome in very good condition with some stains(see photos). Has 3 slight dings...tried to show in photos. Very nice for age.

https://www.ebay.com/itm/1965-Ford-…HYAAOSwX85cnAx9

-Fred-

This pair of used Hipo chrome valve covers received no bids by April 1, 2019 and therefore did NOT sell.

-Fred-

Quote from C6ZZKGT

This used bare block is back on Ebay again with a new higher starting bid of $1,950.00 although this time it is cleaned up and has what appears to be original Hipo main caps however possibly not for this block being as the seller did not have them before:
https://www.ebay.com/itm/3526258575…em=352625857575

-Fred-

This used Hipo block and caps received no bids by March 31, 2019 and therefore did NOT sell.

-Fred-

Here is an Ebay auction for another used Hipo counterweight and sprocket by Ebay member "magmustangs" with a Buy-It Now of $299.00:

1963-1967 Ford Mustang, GT, Shelby GT350, Cobra, Fairlane, 500. 289 HIPO CRANKSHAFT COUNTERWEIGHT-HATCHET With LOWER TIMING GEAR-SPROCKET. These are ORIGINAL FORD PARTS. Removed from a 65 Mustang with 289 Hipo. . The Counterweight and Sprocket are in Great Original Condition. I have left them in as found condition. They have a little surface stuff but No Metal Pitting or Heavy Rust. They will clean up to look nice. No cracks or splits. Not bent or damaged. The sprocket has good looking gear teeth. Overall, this is a Great Original 289 HIPO Crank Counterweight and Timing Sprocket.. Impossible To Find Original. Please email with any questions.

https://www.ebay.com/itm/63-1964-19…5.c100005.m1851

-Fred-

Here is an Ebay auction for a used Hipo counterweight and sprocket by Ebay member "magmustangs" with a Buy-It Now of $299.00:

1963-1967 Ford Mustang, GT, Shelby GT350, Cobra, Fairlane, 500. 289 HIPO CRANKSHAFT COUNTERWEIGHT-HATCHET With LOWER TIMING GEAR-SPROCKET. These are ORIGINAL FORD PARTS. Removed from a 66 Mustang GT with 289 Hipo. . The Counterweight and Sprocket are in Great Original Condition. I have left them in as found condition. They have a little surface stuff but No Metal Pitting or Heavy Rust. They will clean up to look nice. No cracks or splits. Not bent or damaged. The sprocket has good looking gear teeth. Overall, this is a Great Original 289 HIPO Crank Counterweight and Timing Sprocket.. Impossible To Find Original. Please email with any questions.

https://www.ebay.com/itm/63-1964-19…5.c100005.m1851

-Fred-

Quote from C6ZZKGT

This set of used Hipo connecting rods received no bids by April 1, 2019 and therefore did NOT sell.

-Fred-

This set of used Hipo connecting rods is back on Ebay again with no changes:

https://www.ebay.com/itm/1636279913…em=163627991334

-Fred-

Quote from C6ZZKGT

This set of used Hipo connecting rods is back on Ebay again with no changes:

https://www.ebay.com/itm/1636154393…=STRK:MEWAX:VRI

-Fred-

This set of used Hipo connecting rods received no bids by April 1, 2019 and therefore did NOT sell.

-Fred-

Here is an Ebay auction for a pair of NOS C2OZ 6564 A rocker arms by Ebay member "289special" with a Buy-It-Now of $60.00 or make offer:

Two nos Ford conventional rocker arms. Part number C2OZ-6564-A For 1963, 1964, 1965 V8 289, 289 Hipo, K Code, Shelby, Cobra, Mustang. Boxes are aged (over 50 yrs. old.) Do your homework. Know your part. Ask questions. Buyer pays $5.00 shipping and handling 48 United States only.

https://www.ebay.com/itm/NOS-1963-1…VwAAOSw6IlclQ9M

-Fred-

Here is an Ebay auction for an NOS C5AZ 6A666 A PCV valve by Ebay member "datedcomponents" with a Buy-It-Now of $349.99:

This is a very rare early style 1965 and 1966 C.S.Co PCV Valve for all K Code 289 Mustang Models. This valve is the Spun or machined steel type with a hex shape. Later replacements under the same number are stamped steel. This one is Authentic for show use. Part number on the box was C5AZ-6A666-A1, and stamping number on the valve is C5AE-6A666-B. From what I understand, some were made for Ford by AC and some were made by C.S.Co. The valve has never been used, but through decades of storage the plating is somewhat faded. This type of valve has a removable lock, plunger and spring, so it could easily be taken apart and replated. Extremely rare find and most have been thrown away decades ago. Your one chance to make your K Code Mustang or Shelby right with the exact original valve.

https://www.ebay.com/itm/NOS-1965-66-Ford-Mustang-Shelby-K-Code-PCV-Valve-C5AZ-6A666-A1-RARE-EARLY-TYPE/152778570941?epid=1840726542&hash=item23924ffcbd:g:SD8AAOSwbw1aAlli:sc:USPSPriority!91387!US!-1

-Fred-