Posts by C6ZZKGT

  • NOS C2OZ 6A528 A Rocker Arm Fulcrum

    Quote from C6ZZKGT


    Here is an Ebay auction for 10 NOS C2OZ 6A528 A rocker arm fulcrums by Ebay member "turbocoupe" with a Buy-It-Now of $34.99:

    These are brand new genuine Ford NOS rocker arm fulcrum seats for the 1965 1966 1967 1968 Ford Mustang 289 302 engine. There are ten here as shown that are Ford part number C2OZ-6A528-C. I ship priority mail world wide and accept paypal.

    https://www.ebay.com/itm/NOS-1965-1…5.c100005.m1851

    -Fred-

    These 10 NOS C2OZ 6A528 A rocker arm fulcrums sold June 30, 2019 on Ebay for $34.99.

    -Fred-

  • NOS C5ZZ 15520 A Backup Light Switch

    This NOS C5ZZ 15520 A switch received no bids by April 21, 2019 and therefore did NOT sell.

    -Fred-

    This NOS C5ZZ 15520 A switch is back on Ebay again with no changes:

    https://www.ebay.com/itm/2026593190…em=202659319004

    -Fred-

    This NOS C5ZZ 15520 A switch received no bids by April 28, 2019 and therefore did NOT sell.

    -Fred-

    This NOS C5ZZ 15520 A switch is back on Ebay again with no changes:

    https://www.ebay.com/itm/1965-1966-…&orig_cvip=true

    -Fred-

    This NOS C5ZZ 15520 A switch received no bids by May 5, 2019 and therefore did NOT sell.

    -Fred-

    This NOS C5ZZ 15520 A switch is back on Ebay again with no changes:

    https://www.ebay.com/itm/2026713747…em=202671374790

    -Fred-

    This NOS C5ZZ 15520 A switch received no bids by May 19, 2019 and therefore did NOT sell.

    -Fred-

    This NOS C5ZZ 15520 A switch is back on Ebay again with no changes:

    https://www.ebay.com/itm/2026839308…em=202683930800

    -Fred-

    This NOS C5ZZ 15520 A switch received no bids by May 26, 2019 and therefore did NOT sell.

    -Fred-

    This NOS C5ZZ 15520 A switch is back on Ebay again with no changes:

    https://www.ebay.com/itm/2026906067…em=202690606782

    -Fred-

    This NOS C5ZZ 15520 A switch received no bids by June 2, 2019 and therefore did NOT sell.

    -Fred-

    This NOS C5ZZ 15520 A switch is back on Ebay again with no changes:

    https://www.ebay.com/itm/2026969097…em=202696909742

    -Fred-

    This NOS C5ZZ 15520 A switch received no bids by June 16, 2019 and therefore did NOT sell.

    -Fred-


    This NOS C5ZZ 15520 A switch is back on Ebay again with no changes:

    https://www.ebay.com/itm/2027093569…em=202709356934

    -Fred-


    This NOS C5ZZ 15520 A switch received no bids by June 23, 2019 and therefore did NOT sell.

    -Fred-


    This NOS C5ZZ 15520 A switch is back on Ebay again with no changes:

    https://www.ebay.com/itm/2027166335…em=202716633549

    -Fred-


    This NOS C5ZZ 15520 A switch received no bids by June 30, 2019 and therefore did NOT sell.

    -Fred-

  • Used Distributor Cap and Wires

    This used distributor cap and wires is back on Ebay again with no changes:

    https://www.ebay.com/itm/2026593184…em=202659318489

    -Fred-

    This used distributor cap and wires received no bids by April 28, 2019 and therefore did NOT sell.

    -Fred-

    This used distributor cap and wires is back on Ebay again with no changes:

    https://www.ebay.com/itm/1965-1966-…&orig_cvip=true

    -Fred-

    This used distributor cap and wires received no bids by May 5, 2019 and therefore did NOT sell.

    -Fred-

    This used distributor cap and wires is back on Ebay again with no changes:

    https://www.ebay.com/itm/2026713759…em=202671375978

    -Fred-

    This used distributor cap and wires received no bids by May 19, 2019 and therefore did NOT sell.

    -Fred-

    This used distributor cap and wires is back on Ebay again with no changes:

    https://www.ebay.com/itm/2026839310…em=202683931046

    -Fred-

    This used distributor cap and wires received no bids by May 26, 2019 and therefore did NOT sell.

    -Fred-

    This used distributor cap and wires is back on Ebay again with no changes:

    https://www.ebay.com/itm/2026906072…em=202690607217

    -Fred-

    This used distributor cap and wires received no bids by June 2, 2019 and therefore did NOT sell.

    -Fred-

    This used distributor cap and wires is back on Ebay again with no changes:

    https://www.ebay.com/itm/2026969128…em=202696912819

    -Fred-

    This used distributor cap and wires received no bids by June 16, 2019 and therefore did NOT sell.

    -Fred-


    This used distributor cap and wires is back on Ebay again with no changes:

    https://www.ebay.com/itm/2027093570…em=202709357077

    -Fred-


    This used distributor cap and wires received no bids by June 23, 2019 and therefore did NOT sell.

    -Fred-


    This used distributor cap and wires is back on Ebay again with no changes:

    https://www.ebay.com/itm/2027166340…em=202716634069


    https://www.ebay.com/itm/2027166340…em=202716634069-Fred-


    This used distributor cap and wires received no bids by June 30, 2019 and therefore did NOT sell.

    -Fred-

  • Used C5OE Harmonic Balancer

    Quote from C6ZZKGT


    Here is an Ebay auction for a used C5OE Hipo harmonic balancer by Ebay member "mustangmasters428" with a starting bid of $395.00:

    Here we have a 1965 66 or 67 hard to find factory original C5OE 289 High Performance Harmonic Balancer. The Ford engineers felt it necessary to add the extra balancing to their 271 horsepower 289 Hipo 4 barrel power house. These hard charging motors received heavy duty rods and special crankshaft which demanded a thicker, heavy duty balancer for this high revving motor.
    A signature item of all 289 HiPo's, Ford also carried this design into their 68 J code 302 4v's which were used in GT 350 Shelby's changing nothing but the part number and adding proper timing marks. This item is also correct for a 68 GT 350 Shelby, and would make a good spare if not replacing your original unit.
    This part is an original C5OZ not the later C8ZE-6316-A offered by Ford as a service replacement part after they depleted their stock of original C5OZ's. Coming to you in good used condition free of gouges or stripped threads and rubber in good shape, we feel this unit will make a great addition or replacement for your worn or tattered original, and will bolt right on with no modifications and perform as originally designed. Whether as a spare, or as a replacement to get your car on the road, don't let this one get away as these are getting hard to find!

    https://www.ebay.com/itm/65-66-67-C…V1bg2Cw&vxp=mtr

    -Fred-

    This used C5OE harmonic balancer received no bids by March 31, 2019 and therefore did NOT sell.

    -Fred-


    This used C5OE harmonic balancer is back on Ebay again with no changes:

    https://www.ebay.com/itm/2643115609…em=264311560900

    -Fred-

    This used C5OE harmonic balancer received no bids by May 12, 2019 and therefore did NOT sell.

    -Fred-


    This used C5OE harmonic balancer is back on Ebay again with no changes:

    https://www.ebay.com/itm/372695284124?ViewItem=&vxp=mtr&item=372695284124


    https://www.ebay.com/itm/3726952841…m=372695284124--Fred-


    This is a really rough appearing balancer so use your own judgment. Contrary to the sellers description, this balancer is NOT correct for a 68 GT350 or 68 J code 302 as they use an C8OE balancer and the outer ring on that one has extra cutouts in it for that application. They do have a similar appearance but are definitely NOT the same.

    -Fred-


    This used C5OE harmonic balancer received no bids by June 30, 2019 and therefore did NOT sell.

    -Fred-

  • Used FoMoCo Hipo Distributor

    Quote from C6ZZKGT


    Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "mustangeer" with a starting bid of $600.00:

    Original factory part C5OF-12127-E, for automatic or manual transmission use, K-code or GT350 Cobra Special SBF engine. Production housing has FoMoCo cast in it, unlike the later Autolite or Motorcraft service units, stamp dated 5LB (1965 Nov wk 2) suits mid production built cars. Full mechanical advance with no vacuum advance or standoff on the side. Professionally rebuilt and restored with many new parts by expert Tim O’Connor, it has not since been installed, place this quality unit proudly front and center on your 289 High Performance mill.

    https://www.ebay.com/itm/65-66-1965…m4383.l4275.c10

    -Fred-

    This used FoMoCo Hipo distributor sold June 30, 2019 on Ebay for $621.00 with 2 bids from 2 bidders.

    -Fred-

  • Used Hipo Exhaust Manifold

    This pair of used Hipo exhaust manifolds is back on Ebay again with no changes:

    https://www.ebay.com/itm/1535486925…em=153548692507

    -Fred-

  • Used Hipo Exhaust Manifold

    Quote from C6ZZKGT


    Here is an Ebay auction for a pair of used Hipo exhaust manifolds by Ebay member "magmustangs" with a starting bid of of $899.00:

    1964.5-1966 Ford Mustang, Fastback, Coupe, Convertible, GT. 289 HIPO - High Performance Exhaust Manifolds. LH and RH Sides. These are ORIGINAL FORD PARTS. The LH Manifold is Cast C3OE-9431-B and date code looks to be [6 27 5]. The RH Manifold is Cast C4ZE-9430-A and date code looks to be [6 15 5]. This is a date matched pair. . Removed from a 65 Mustang GT Fastback With 289 Hipo Motor. The Exhaust Manifolds are in Great Original Condition. No heavy rust or metal pitting. All of the Ports and surfaces look Good.. NO Cracks or Fractures. Have the tail pipe studs. They are very clean. Overall, this is a Great Pair of Original 289 HIPO Exhaust Manifolds. Impossible To Find Original.

    https://www.ebay.com/itm/1964-1965-…R8AAOSw3fpcw4T0

    -Fred-

    This used pair of Hipo exhaust manifolds received no bids by May 12, 2019 and therefore did NOT sell.

    -Fred-

    This pair of used Hipo exhaust manifolds is back on Ebay again with no changes:

    https://www.ebay.com/itm/1636873230…em=163687323097

    -Fred-

    This used pair of Hipo exhaust manifolds received no bids by May 19, 2019 and therefore did NOT sell.

    -Fred-

    This pair of used Hipo exhaust manifolds is back on Ebay again with no changes:

    https://www.ebay.com/itm/1534956090…em=153495609072

    -Fred-

    This used pair of Hipo exhaust manifolds received no bids by May 26, 2019 and therefore did NOT sell.

    -Fred-

    This pair of used Hipo exhaust manifolds is back on Ebay again with no changes:

    https://www.ebay.com/itm/1535035870…em=153503587044

    -Fred-

    This used pair of Hipo exhaust manifolds received no bids by June 2, 2019 and therefore did NOT sell.

    -Fred-

    This pair of used Hipo exhaust manifolds is back on Ebay again with no changes:

    https://www.ebay.com/itm/1964-1965-…&orig_cvip=true

    -Fred-

    This used pair of Hipo exhaust manifolds received no bids by June 9, 2019 and therefore did NOT sell.

    -Fred-

    This pair of used Hipo exhaust manifolds is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637277743…em=163727774389

    -Fred-

    This used pair of Hipo exhaust manifolds received no bids by June 16, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used Hipo exhaust manifolds is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637386257…em=163738625757

    -Fred-


    This used pair of Hipo exhaust manifolds received no bids by June 23, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used Hipo exhaust manifolds is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637499059…em=163749905926

    -Fred-


    This used pair of Hipo exhaust manifolds received no bids by June 30, 2019 and therefore did NOT sell.

    -Fred-

  • Used C3DZ 8146 D Radiator Fan Shroud

    Here is an Ebay auction for a used radiator fan shroud by Ebay member "mustangeer" with a starting bid of $75.00:

    Original service part C3DZ-8146-D, for 260 / 289 w/ air conditioning or 289 Special 4/B use. Has NOS tag and round shape in metal, factory dipped black paint drips are still there but with some chipping and surface rust in those areas. From a 1966 K-code. Keep you or that high revving High Performance engine a bit cooler with this part.

    https://www.ebay.com/itm/65-66-1965…DQAAOSwRrJdFDty

    -Fred-

  • Used FoMoCo Hipo Distributor

    Here is an Ebay auction for a used FoMoCo Hipo distributor by Ebay member "mustangeer" with a starting bid of $600.00:

    Original factory part C5OF-12127-E, for automatic or manual transmission use, K-code or GT350 Cobra Special SBF engine. Production housing has FoMoCo cast in it, unlike the later Autolite or Motorcraft service units, stamp dated 5LB (1965 Nov wk 2) suits mid production built cars. Full mechanical advance with no vacuum advance or standoff on the side. Professionally rebuilt and restored with many new parts by expert Tim O’Connor, it has not since been installed, place this quality unit proudly front and center on your 289 High Performance mill.

    https://www.ebay.com/itm/65-66-1965…m4383.l4275.c10

    -Fred-

  • 6T07K169850 on BAT

    Quote from C6ZZKGT


    This 1966 Ford Mustang is powered by a Hi-Po 289ci K-code V8 paired with a four-speed manual gearbox. Finished in Nightmist Blue over a Parchment interior, this Mustang was ordered with factory options including the GT equipment package, interior decor group, visibility group, special handling package, styled steel wheels, and Rally-Pac clock/tachometer. The car was sold new by Town & Country Ford of Charlotte, North Carolina, and it is believed to have spent time in North Carolina, Ohio, and California before coming to Texas. The seller has owned the car for 14 years and has added approximately 12k miles. Items replaced under current ownership include the rear main seal, oil-pan gaskets, distributor cap and rotor, brake master cylinder, alternator, heater core, and battery. This K-code Mustang is now offered with sales literature, a copy of the window sticker, the removed AM radio and kick panels, a car cover, and a clean Texas title in the seller’s name.

    https://bringatrailer.com/listing/1966-ford-mustang-118/

    -Fred-

    This Kar is in the registry and it is currently bid to $18,000. The engine has a C8ZE replacement harmonic balancer. The upper and lower control arms along with the tie rod ends are aftermarket. This Kar needs a prepurchase inspection done on some questionable items.

    -Fred-

  • 6T07K169850 on BAT

    This 1966 Ford Mustang is powered by a Hi-Po 289ci K-code V8 paired with a four-speed manual gearbox. Finished in Nightmist Blue over a Parchment interior, this Mustang was ordered with factory options including the GT equipment package, interior decor group, visibility group, special handling package, styled steel wheels, and Rally-Pac clock/tachometer. The car was sold new by Town & Country Ford of Charlotte, North Carolina, and it is believed to have spent time in North Carolina, Ohio, and California before coming to Texas. The seller has owned the car for 14 years and has added approximately 12k miles. Items replaced under current ownership include the rear main seal, oil-pan gaskets, distributor cap and rotor, brake master cylinder, alternator, heater core, and battery. This K-code Mustang is now offered with sales literature, a copy of the window sticker, the removed AM radio and kick panels, a car cover, and a clean Texas title in the seller’s name.

    https://bringatrailer.com/listing/1966-ford-mustang-118/

    -Fred-

  • Used Hipo 289 Rods

    This set of used Hipo connecting rods sold June 27, 2019 on Ebay for $1,400.00.

    -Fred-

  • C4OE Hipo Flex Plate

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637554169…em=163755416901

    -Fred-

  • C4OE Hipo Flex Plate

    Quote from C6ZZKGT


    Here is an Ebay auction for a used C4OE Hipo flex plate by Ebay member "magmustangs" with a Buy-It-Now of $499.00:

    1963-1967 Ford Mustang, GT, GTA, Shelby GT350, Fairlane 500. C4 Automatic FLEX PLATE for 289 HIPO. 160 TOOTH. Measures approx. 13 3/8" Overall Diameter. . This is an ORIGINAL FORD PART. The Plate is stamped (FoMoCo) and the counterweight is stamped C4OE-6375-C. .. . Removed from 1966 Mustang Fastback with 289 HIPO and C4 A/T Trans. .. . The Flex Plate is in Great Condition. There is some wear on the ring gear teeth. No Dents or Dings. Has a Natural Metal Finish and looks Great. No Real Rust.. No Cracks. Overall, this is a Great Original 289 HIPO with C4 Flex Plate.

    https://www.ebay.com/itm/63-1964-19…8MAAOSw9Clc1KBz

    -Fred-

    This used C4OE Hipo flex plate received no bids by May 16, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1534922685…em=153492268536

    -Fred-

    This used C4OE Hipo flex plate received no bids by May 23, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637036643…=STRK:MEWAX:VRI

    -Fred-

    This used C4OE Hipo flex plate received no bids by May 30, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637134810…em=163713481071

    -Fred-

    This used C4OE Hipo flex plate received no bids by June 6, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1535172728…em=153517272878

    -Fred-

    This used C4OE Hipo flex plate received no bids by June 13, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637343077…em=163734307765

    -Fred-

    This used C4OE Hipo flex plate received no bids by June 20, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637458878…em=163745887827

    -Fred-


    This used C4OE Hipo flex plate received no bids by June 27, 2019 and therefore did NOT sell.

    -Fred-

  • NOS C3OZ 9A589 C Carburetor Spacer Plate

    Quote from C6ZZKGT


    Here is an Ebay auction for an NOS C3OZ 9A589 C Hipo 289 carburetor spacer plate by Ebay member "kmustangs" with a starting bid of $75.00:

    [size=4]Up for auction is an NOS carb spacer that is for 1964-1966 mustang. I lost the little clamp and the cap.[/size]

    https://www.ebay.com/itm/64-65-66-m…d4AAOSw5uxdCFyW

    -Fred-

    This NOS C3OZ 9A589 C Hipo 289 carburetor spacer plate received no bids by June 24, 2019 and therefore did NOT sell.

    -Fred-

  • Used C5OE Harmonic Balancer

    Quote from C6ZZKGT


    Here is an Ebay auction for a used C5OE Hipo harmonic balancer by Ebay member "tater_51" with a stating bid of $575.00:

    289 Hipo K code harmonic balancer. Dated I4. Condition is Used. Please contact me for any further questions or concerns. Shipping is calculated for the lower 48 States. International shipping to be calculaued at end of auction. Shipped with USPS Priority Mail.

    https://www.ebay.com/itm/289-Hipo-K…n8AAOSwKQJc~wXL

    -Fred-

    This balancer has a date code stamping of I4. Being as Ford did not use the letter "I" in date codes, I fail to understand this one. Maybe the Ford worker who stamped this came from GM as they did use the letter "I" in their date codes which is September for a GM date code.

    -Fred-

    This used C5OE harmonic balancer received no bids by June 17, 2019 and therefore did NOT sell.

    -Fred-

    This used C5OE harmonic balancer is back on Ebay again with no changes:

    https://www.ebay.com/itm/1238059783…em=123805978351

    -Fred-


    This used C5OE harmonic balancer received no bids by June 24, 2019 and therefore did NOT sell.

    -Fred-


    This used C5OE harmonic balancer is back on Ebay again with a new lower starting bid of $550.00:

    https://www.ebay.com/itm/1238139746…em=123813974685

    -Fred-

  • Used C5OE Harmonic Balancer

    This used C5OE harmonic balancer received no bids by June 24, 2019 and therefore did NOT sell.

    -Fred-

  • Engine ModifiKation

    Quote from Niko

    No, unfortunately they aren't hardened. I told the shop to use hardened seats but they didn't do it.
    And i think that im goona leave it as it is because i bought 100 bottles of lead additive for 1 dollar per bottle.

    Regarding the engine: I sent him your response as he asked me why i wouldn't do it.

    He said that it's a misunderstanding. He wont enlarge the ports. He wants to just "smooth them out" and to adjust the "transition area" and to slightly grind the valve sealing surface. That will make the engine run smoother and give some more power and fuel burning efficiency.

    I don't know if anyone is familiar with that procedure. I'm not but that doens't mean anything.

    Looking forward to your replies.

    Niko,

    Any of this is an unnecessary expense on your part as you will not notice a difference. You are not trying to build an economy car or an ultra performance version. At least it would not be detrimental to performance as the porting would be and it makes no sense to disassemble your engine for this. You would gain a lot more performance with headers, a larger set of exhaust pipes and mufflers, a larger camshaft and a larger carburetor. Do not forget to change the rods to a stronger version as you will also need to work the engine in a higher RPM range than Ford originally intended. Keep in mind that at only 6,000 RPM your pistons are moving up and down inside your cylinders 100 times per second. As long as the horsepower of the engine is increasing with RPM, you are gaining as you are exchanging that horsepower more times per second to move your Kar forward. All of your internal parts are trying very hard to escape their contained surroundings. Many times they successfully escape and ruin a perfectly good engine which degrades the value of your Kar as they are only original once. If your person feels the need to spend your money for performance, build a different engine and leave your original stored somewhere intact. It is not that expensive to build a higher performance engine compared to trying to replicate an original Hipo 289. You can buy aftermarket heads that will outperform modified Hipo 289 heads for far less money than original Hipo 289 heads. I could go on and on with this, but by now you should understand my concerns.

    Hipo 289 engines are not really known for sinking exhaust valves without hardened seats and your lead additive will be just fine. Just enjoy your Kar as it is the way Ford built it. If you want a hot rod, start with a different car.

    -Fred-

  • NOS C3OZ 9430 C & C3OZ 9431 B Exhaust Manifolds

    These are extremely rare being the early style on the right hand side. They are rare enough if they were just used but I have NEVER seen the right hand as an NOS part.

    -Fred-


    These NOS Hipo early style exhaust manifolds received no bids by June 24, 2019 and therefore did NOT sell.

    -Fred-


    These NOS Hipo early style exhaust manifolds are back on Ebay again with no changes:

    https://www.ebay.com/itm/202717497340?ViewItem=&vxp=mtr&item=202717497340

    -Fred-