Posts by C6ZZKGT

  • NOS D1AZ 12A132 A dual point conversion kit

    Quote from C6ZZKGT


    Here is an Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

    I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts to the up coming younger generations to use. You are bidding on a **NOS 289 HiPo service replacement (K) code dual point distributor breaker plate kit. Part number on NOS Motorcraft box D1AZ-12A132-A. Comes complete with all NOS Motorcraft points & condenser in pictures & mounting hardware & springs & instruction paper. Does come with a Motorcraft box. This is 100% correct for the 289 HiPo (K) code distributor & 427 HP (W) code distributor. 100% correct Motorcraft kit for changing any single point Ford housing: FoMoCo, Autolite, Motorcraft distributor to a dual point distributor. Correct for the 1964 to 1974 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with a Ford engine. **Shipping includes FREE insurance in the USA. **I post a Buy It Now or just bid freely.** *** Will ship outside the USA shipping Air Mail cost will be added*** ***Remember Original Ford parts give the best Performance***

    https://www.ebay.com/itm/289-HiPo-M…m4383.l4275.c10

    -Fred-

    This NOS D1AZ 12A132 A dual point conversion kit received no bids by October 3, 2019 and therefore did NOT sell.

    -Fred-

  • Hipo 4 Speed Flywheel

    Quote from C6ZZKGT

    Do your due diligence on this flywheel. I do not see the ground area on the counterweight where there should be a Brinnel test mark. Therefore I am in doubt as to this being a true Hipo flywheel. A better picture of the counterweight would be in order here.

    -Fred-

    This used Hipo 4 speed flywheel sold October 4, 2019 on Ebay for $499.00.

    -Fred-

  • C4OE Hipo Flex Plate

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1536729783…em=153672978396

    -Fred-

  • C4OE Hipo Flex Plate

    Quote from C6ZZKGT


    Here is an Ebay auction for a used C4OE Hipo flex plate by Ebay member "magmustangs" with a Buy-It-Now of $499.00:

    1963-1967 Ford Mustang, GT, GTA, Shelby GT350, Fairlane 500. C4 Automatic FLEX PLATE for 289 HIPO. 160 TOOTH. Measures approx. 13 3/8" Overall Diameter. . This is an ORIGINAL FORD PART. The Plate is stamped (FoMoCo) and the counterweight is stamped C4OE-6375-C. .. . Removed from 1966 Mustang Fastback with 289 HIPO and C4 A/T Trans. .. . The Flex Plate is in Great Condition. There is some wear on the ring gear teeth. No Dents or Dings. Has a Natural Metal Finish and looks Great. No Real Rust.. No Cracks. Overall, this is a Great Original 289 HIPO with C4 Flex Plate.

    https://www.ebay.com/itm/63-1964-19…8MAAOSw9Clc1KBz

    -Fred-

    This used C4OE Hipo flex plate received no bids by May 16, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1534922685…em=153492268536

    -Fred-

    This used C4OE Hipo flex plate received no bids by May 23, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637036643…=STRK:MEWAX:VRI

    -Fred-

    This used C4OE Hipo flex plate received no bids by May 30, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637134810…em=163713481071

    -Fred-

    This used C4OE Hipo flex plate received no bids by June 6, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1535172728…em=153517272878

    -Fred-

    This used C4OE Hipo flex plate received no bids by June 13, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637343077…em=163734307765

    -Fred-

    This used C4OE Hipo flex plate received no bids by June 20, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637458878…em=163745887827

    -Fred-


    This used C4OE Hipo flex plate received no bids by June 27, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637554169…em=163755416901

    -Fred-


    This used C4OE Hipo flex plate received no bids by July 4, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637651876…em=163765187619

    -Fred-


    This used C4OE Hipo flex plate received no bids by July 11, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637740176…em=163774017698

    -Fred-


    This used C4OE Hipo flex plate received no bids by July 18, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637829811…em=163782981176

    -Fred-


    This used C4OE Hipo flex plate received no bids by July 25, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1535808361…em=153580836131

    -Fred-


    This used C4OE Hipo flex plate received no bids by August 1, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638014058…em=163801405863

    -Fred-


    This used C4OE Hipo flex plate received no bids by August 8, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1535975779…em=153597577976

    -Fred-


    This used C4OE Hipo flex plate received no bids by August 16, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1536068508…em=153606850890

    -Fred-


    This used C4OE Hipo flex plate received no bids by August 23, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638315917…em=163831591732

    -Fred-


    This used C4OE Hipo flex plate received no bids by August 30, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638407910…em=163840791032

    -Fred-


    This used C4OE Hipo flex plate received no bids by September 6, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638511630…em=163851163025

    -Fred-


    This used C4OE Hipo flex plate received no bids by September 13, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638615336…em=163861533649

    -Fred-


    This used C4OE Hipo flex plate received no bids by September 20, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638728717…em=163872871709

    -Fred-


    This used C4OE Hipo flex plate received no bids by September 27, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1536624690…em=153662469067

    -Fred-


    This used C4OE Hipo flex plate received no bids by October 5, 2019 and therefore did NOT sell.

    -Fred-

  • NOS C3OZ 6505 A Exhaust Valves

    Here is an Ebay auction for four NOS C3OZ 6505 A exhaust valves by Ebay member "uncledalesemporium" with a Buy-It-Now of $49.99:

    1963 1964 1965 1966 1967 Ford Mercury 289 Hipo Exhaust Valves 4x

    NOS FORD

    Applications Include:
    1963 - 1968 Ford Mustang Special Fairlane Special 289 ci V8 Exhaust Valves
    1964 Mercury Comet Special 289 ci w/ 4 Bbl. Carb V8 Exhaust Valves

    Head Dia 1-29/64
    Stem Length 4-13/16
    Stem Dia .341
    Seat Angle 44°

    Ford C3OZ6505A


    https://www.ebay.com/itm/NOS-Ford-H…4sAAOSw6AlZ2YKI

    -Fred-

  • Used C7ZE Heads

    This pair of used C7ZE heads sold October 6, 2019 on Ebay for $2,026.01 with 11 bids from 7 bidders.

    -Fred-

  • NOS C3OZ 6306 A Hipo Crank Sprocket

    Here is an Ebay auction for an NOS C3OZ 6306 A Hipo crankshaft sprocket by Ebay member "magmustangs" with a Buy-It-Now of $225.00:

    1963-1967 Ford Mustang, GT, Shelby GT350, Cobra, Fairlane, 500. New-Old-Stock 289 HIPO CRANKSHAFT TIMING CHAIN SPROCKET. This is an ORIGINAL FORD NOS PART. This sprocket is in Excellent NOS condition. Brand new in the box. Impossible To Find Original NOS. Please email with any questions. 070219-18DP WE HAVE AN EBAY STORE WITH THOUSANDS OF ORIGINAL FORD PARTS. CHECK IT OUT.

    https://www.ebay.com/itm/1963-1964-…KsAAOSweYhdG-P4

    -Fred-

  • NOS C5ZZ 17285 A Speedometer Drive Gear

    Quote from C6ZZKGT


    Here is an Ebay auction for an NOS C5ZZ 17285 A speedometer drive gear by Ebay member "1966upfordparts" with a Buy-It-Now of $25.00:

    This part is new in the original Ford box and in great condition. This is the transmission speedometer drive gear. It will fit 1965 Mustang models with a Ford 4 speed transmission and 3:50 or 4:11 gears. Nice part to have as an extra.

    [size=4][size=4][size=4]Most of my parts date back to the 60’s 70’s and 80’s. These parts have never been offered for sale before. I will be listing these parts for many months and years to come. Please note that the parts I sell are mostly NOS [new old stock]. This simply means they are new original Ford. They may or may not be in a box. They will all be in good “never been installed” condition. However they will NOT be perfect. All these parts were mass produced and Ford never intended for them to be perfect in todays standards. If you are building a car to look “Time period correct” then NOS is the only way to go. I try very very hard to represent these parts to the best of my knowledge. If for any reason you are unhappy with your purchase, please contact me. I will take care of the issue and help in any way I can. Marty[/size][/size][/size]

    [size=2]https://www.ebay.com/itm/Transmissi…275.c1#viTabs_0[/size]
    [size=1]-Fred-[/size]

    I posted this gear on here as a warning as it is incorrectly boxed and is NOT actually a C5ZZ 17285 A gear. This one has 7 teeth where the correct one will have 6 teeth. I have already notified the seller of this.

    -Fred-


    The seller has now corrected their auction to reflect the proper application and part number change on the box.

    -Fred-


    This actual NOS C4DZ 17285 A speedometer drive gear sold October 2, 2019 an Ebay for $25.00.

    -Fred-

  • Used Hipo Chrome Valve Covers

    Here is an Ebay auction for a pair of used early Hipo chrome valve covers by Ebay seller "fordcobrajet428" with a starting bid of $250.00:

    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1740513745…em=174051374528

    -Fred-

  • NOS C3DZ 8146 D Radiator Fan Shroud

    Quote from C6ZZKGT


    Here is an Ebay auction for an NOS C3DZ 8146 D radiator fan shroud by Ebay member "shelbym350" with a starting bid of $175.00:

    NOS 1965-1966 FORD MUSTANG HIPO FAN SHROUD C3DZ-8146-D. See photos

    https://www.ebay.com/itm/1965-1966-…-oAAOSw2CFcu8Cn

    -Fred-

    Not that this is bad as it is not, this is the first time in all my years as a Ford parts person that I have seen one of the shrouds with the part number stenciled on. Generally they are just stick on labels or boxed.

    -Fred-

    This NOS C3DZ 8146 D radiator fan shroud received no bids by June 5, 2019 and therefore did NOT sell.

    -Fred-

    This NOS C3DZ 8146 D radiator fan shroud is back on Ebay again with no changes:

    https://www.ebay.com/itm/2643555391…em=264355539152

    -Fred-

    This NOS C3DZ 8146 D radiator fan shroud received no bids by June 14, 2019 and therefore did NOT sell.

    -Fred-

    This NOS C3DZ 8146 D radiator fan shroud is back on Ebay again with a new lower starting bid of $150.00 and a Buy-It-Now of $195.00:

    https://www.ebay.com/itm/2643624146…em=264362414614

    -Fred-

    This NOS C3DZ 8146 D radiator fan shroud received no bids by June 19, 2019 and therefore did NOT sell.

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud is back on Ebay again with no changes:

    https://www.ebay.com/itm/2643824467…em=264382446732

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud received no bids by July 5, 2019 and therefore did NOT sell.

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud is back on Ebay again with a new much lower starting bid of $100.00:

    https://www.ebay.com/itm/2644038110…em=264403811006

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud received no bids by July 26, 2019 and therefore did NOT sell.

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud is back on Ebay again with no changes:

    https://www.ebay.com/itm/2644147604…em=264414760407

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud received no bids by August 6, 2019 and therefore did NOT sell.

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud is back on Ebay again with a new much lower starting bid of $75.00:

    https://www.ebay.com/itm/2644249428…em=264424942839

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud received no bids by August 15, 2019 and therefore did NOT sell.

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud is back on Ebay again with a starting bid of $75.00 and a Buy-It-Now of $125.00:

    https://www.ebay.com/itm/2644470620…em=264447062027

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud received no bids by September 8, 2019 and therefore did NOT sell.

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud is back on Ebay again with no changes:

    https://www.ebay.com/itm/2644597872…em=264459787264

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud received no bids by September 19, 2019 and therefore did NOT sell.

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud is back on Ebay again with no changes:

    https://www.ebay.com/itm/2644724505…em=264472450542

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud received no bids by September 30, 2019 and therefore did NOT sell.

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud is back on Ebay again with a new lower starting bid of $75.00:

    https://www.ebay.com/itm/2644840529…em=264484052955

    -Fred-


    This NOS C3DZ 8146 D radiator fan shroud sold October 2, 2019 on Ebay for $75.00.

    -Fred-

  • NOS C3DZ 8146 D Radiator Fan Shroud

    This NOS C3DZ 8146 D radiator fan shroud is back on Ebay again with a new lower starting bid of $75.00:

    https://www.ebay.com/itm/2644840529…em=264484052955

    -Fred-

  • Used Hipo 289 Rods

    This set of used Hipo connecting rods is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638873020…em=163887302007

    -Fred-

  • Used Hipo 289 Rods

    Quote from C6ZZKGT


    Here is an Ebay auction for another set of used Hipo connecting rods by Ebay member "magmustangs" with a starting bid of $1,499.00:

    [size=4]1963-1967 Ford Mustang, GT, GTA, Shelby GT350, Cobra, Fairlane, 500. Set of 289 HIPO CONNECTING RODS WITH CAPS. . These are ORIGINAL FORD PARTS. Removed from a 1966 Mustang GT with 289 HIPO Motor. ... All of the The Rods are Original and have C3AE-D Casting Numbers. Have All of the original square head 3/8" bolts and nuts. These have been Thermal Cleaned and Media Blasted and Magnafluxed and checked out fine. No cracks or damage. They are in Excellent Original Condition. No Rust or pitting. Not bent or warped. Great looking Caps. All of the correct bolts are great. These are Uncut rods. They have never been ground and with quick measurements they all seem to be within a few thousandths of each other. No excessive wear. Overall, this is an Excellent Set of Original 289 HIPO Connecting Rods. IMPOSSIBLE TO FIND ORIGINAL. You couldn't expect to find a better set than this. Please email with any questions .. 071519-25DP WE HAVE AN EBAY STORE WITH THOUSANDS OF ORIGINAL FORD PARTS. CHECK IT OUT.[/size]

    [size=2]https://www.ebay.com/itm/63-64-1965…m4383.l4275.c10[/size]

    -Fred-

    This set of used Hipo connecting rods received no bids by July 22, 2019 and therefore did NOT sell.

    -Fred-


    This set of used Hipo connecting rods is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637874936…em=163787493668

    -Fred-


    This set of used Hipo connecting rods received no bids by July 29, 2019 and therefore did NOT sell.

    -Fred-


    This set of used Hipo connecting rods is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637967512…em=163796751261

    -Fred-


    This set of used Hipo connecting rods received no bids by August 5, 2019 and therefore did NOT sell.

    -Fred-


    This set of used Hipo connecting rods is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638061315…em=163806131585

    -Fred-


    This set of used Hipo connecting rods received no bids by August 12, 2019 and therefore did NOT sell.

    -Fred-


    This set of used Hipo connecting rods is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638162614…em=163816261409

    -Fred-


    This set of used Hipo connecting rods received no bids by August 19, 2019 and therefore did NOT sell.

    -Fred-


    This set of used Hipo connecting rods is back on Ebay again with no changes:

    https://www.ebay.com/itm/1536105475…em=153610547579

    -Fred-


    This set of used Hipo connecting rods received no bids by August 26, 2019 and therefore did NOT sell.

    -Fred-


    This set of used Hipo connecting rods is back on Ebay again with no changes:

    https://www.ebay.com/itm/1536197180…em=153619718087

    -Fred-


    This set of used Hipo connecting rods received no bids by September 2, 2019 and therefore did NOT sell.

    -Fred-


    This set of used Hipo connecting rods is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638452463…em=163845246375

    -Fred-


    This set of used Hipo connecting rods received no bids by September 9, 2019 and therefore did NOT sell.

    -Fred-


    This set of used Hipo connecting rods is back on Ebay again with no changes:

    https://www.ebay.com/itm/1536380696…em=153638069695

    -Fred-


    This set of used Hipo connecting rods received no bids by September 16, 2019 and therefore did NOT sell.

    -Fred-


    This set of used Hipo connecting rods is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638672280…em=163867228052

    -Fred-


    This set of used Hipo connecting rods received no bids by September 24, 2019 and therefore did NOT sell.

    -Fred-


    This set of used Hipo connecting rods is back on Ebay again with no changes:

    https://www.ebay.com/itm/1536559650…em=153655965035

    -Fred-


    This set of used Hipo connecting rods received no bids by October 1, 2019 and therefore did NOT sell.

    -Fred-

  • NOS C2OZ 6565 B Engine Push Rods

    Quote from C6ZZKGT

    This Ebay auction for a set of 16 NOS C2OZ 6565 B engine push rods was ended by the seller October 1, 2019 with the following explanation "This listing was ended by the seller because the item is no longer available".

    -Fred-

    Just as a side note, the price on these push rods had been reduced to $220.00.

    -Fred-

  • NOS C2OZ 6565 B Engine Push Rods

    Quote from C6ZZKGT


    Here is an Ebay auction for a set of 16 NOS C2OZ 6565 B engine push rods by Ebay member "289special" with a Buy-It-Now of $350.00 or make offer:

    [size=4]Sixteen NOS Ford Push rods. Service Part. Part number C2OZ-B For 1963 1964 1965 AC COBRA 260, 289 engine. Do your homework. Know your part. Ask questions. Buyer pays $15.00 shipping and handling 48 United States only. [/size]

    [size=2]https://www.ebay.com/itm/1963-1964-…OUAAOSw2rxdG3le[/size]

    -Fred-

    This Ebay auction for a set of 16 NOS C2OZ 6565 B engine push rods was ended by the seller October 1, 2019 with the following explanation "This listing was ended by the seller because the item is no longer available".

    -Fred-

  • Used Hipo Chrome Valve Covers

    This pair of used Hipo chrome valve covers sold October 1, 2019 on Ebay for $375.00.

    -Fred-

  • Used Hipo Chrome Valve Covers

    This pair of used early Hipo chrome valve covers received no bids by August 11, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1839191509…em=183919150922

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by August 20, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1839272429…em=183927242965

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by August 29, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1740174594…em=174017459412

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by September 9, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1839475326…em=183947532681

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by September 16, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1839595612…em=183959561228

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by September 24, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    -Fred-


    https://www.ebay.com/itm/1740432361…em=174043236144

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by October 2, 2019 and therefore did NOT sell.

    -Fred-

  • Used C7ZE Heads

    Here is an Ebay auction for a pair of used C7ZE heads by Ebay member "9t03q" with a starting bid of $1,200.00:

    1967 FORD 289 HIPO HEADS C7ZE SHELBY MUSTANG GT350 K-CODE - REBUILT. Condition is Remanufactured. Shipped with UPS Ground.


    Like new set of rebuilt 1967 HiPo heads ready to install

    Rebuild Info:
    - New valves
    - 3-angle valve grind
    - Resurfaced
    - New retainers
    - Factory springs were tested and reinstalled
    - Factory valve guides were well within factory specifications so they were not replaced
    - New valve guide seals
    - Magnafluxed tested

    Casting Info:
    Date code on both heads: 7E11 (May 11, 1967)
    Casting #: C7ZE
    Casting at end of each head: 21

    Whats the story behind these heads?:
    My friend owns a performance machine shop in Fresno California that had this set of heads and block dropped off to them for a full standard rebuild. Right at the end of the rebuild process the customer elected to go with aftermarket heads and sold the completed heads to me.

    My rebuilder noted the heads had very low miles since they didn't even need valve guides. These heads are all factory stock, no modifications. Rocker arms are not included or available.

    Upon purchase we can put you in contact with the machine shop if your interested in talking to them about the rebuild they performed.
    We are offering a 30-day return option so you can have your local machine shop inspect them. If they are not everything we said they were you can return them for a full refund less shipping cost. They must be returned in the the exact same condition as they were received. Sorry, no warranty.

    Factory applications:
    - 1967 Shelby GT350
    - 1967 HiPo 289 Mustang

    Shipping Options:
    - USA only $125.00 flat fee UPS Ground
    - Pickup at our shop in Fresno, CA

    Contact me if you need any additional pictures or info,
    Jack
    Dead Nuts On


    On Oct-01-19 at 16:42:55 PDT, seller added the following information:

    10/1/19 update: I do have pictures of the intake ports etc on request.


    https://www.ebay.com/itm/1967-FORD-…5.c100012.m1985

    -Fred-