Posts by C6ZZKGT

  • Used 289 Carburetor Spacer Plate

    Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "magmustangs" with a starting bid of $99.00:

    1964-1969 Ford Mustang, GT, GTA, GT/CS, Mach 1, Grande, Shelby GT350, Falcon, Fairlane, Torino, Ranchero, Mercury Cougar, XR7, Eliminator, Montego, Comet, Cyclone. ORIGINAL 4V CARBURETOR SPACER For 289-HIPO-302-351W Engine. 1" HEIGHT. This is an ORIGINAL FORD PART. Casting Number C4OE-9A589-A and (FoMoCo). Removed from a 65 Mustang GT Fastback with 289 4V Motor. This Spacer is in Great Original Condition. It is Clean and Straight. Has a Natural Metal Finish and Looks Great. Smooth Gasket Surfaces. No heavy Build-Up on the inside. Has a Good PCV Port Tube. Not clogged. No Cracks. No rust or corrosion. Overall, this is a Great Original 4V Carburetor Spacer. Please email with questions. 100719-2 WE HAVE AN EBAY STORE WITH THOUSANDS OF ORIGINAL FORD PARTS. CHECK IT OUT.

    https://www.ebay.com/itm/1964-1965-…rIAAOSw1Txdm6uf

    -Fred-

  • NOS C5ZZ 6540544 C GT Rear Valance

    Here is an Ebay auction for an NOS C5ZZ 6540544 C GT rear valance by Ebay member "mustangmasters428" with a starting bid of $295.00:

    [size=2]Here we have another great example of our extensive NOS inventory. This a red oxide NOS rear valance is for a 65 or 66 Gt Rear valance for dual exhaust a C5ZZ 6540544C. As you can tell from the photos this is of the red color which is known to be of the earlier manufactured piece which is a crisper better fitting piece. This valance has never been installed, but does show a little shelf wear that we have cleaned up with a touch of red primer but all in all original Ford color & paint. A true survivor piece put away for countless years for you ![/size]
    [size=2]Are you the proud owner of a 1965 1966 Hipo Mustang or Shelby of these years. This piece was even used in the standard single exhaust cars so if you have the need for a rear valance that does not call dual exhaust this is for you. [/size]
    [size=2] If this is your auction as you know, NOS parts for these are hard to find, and we've held this for quite some time for a project we have sold and now we're offering it to someone to finish their restoration. A great piece for that discriminating buyer that can only be satisfied by a true Ford piece that fits right and has the Ford quality stamp.[/size]

    https://www.ebay.com/itm/NOS-1965-C…z0AAOSw1ABdtlc4

    -Fred-

  • Used Mexican Main Caps

    Here is an Ebay auction for a set of used Mexican main bearing caps by Ebay member "mustangmasters428" with a starting bid of $295.00:

    [size=2]Here we have a set of good used Mexican 302 HiPo Cast Iron Heavy Duty Main Bearing Caps. Ford thought it necessary to use this style non tapered main caps in their Mexican 302 motors following the design of their 289 High Performance motors from '64 to '67 motors. The rest of the motor inthe Mexican assembly was basically the same so these true Ford pieces are the desirable piece.

    [/size][size=2]These heavier duty design main caps offered the strength Ford engineers felt was needed to overcome the excessive demands on the industrial 302 Mexcan motors. Having the same design as the earlier 289 Hipo where the were first unveiled and later used.

    [/size][size=2]This used set of Mexican 302 commonly refereed to as HiPo 289 clone main bearing caps have been inspected and shows no signs of cracks, welds, or repairs. They are the real deal Ford Stock so you will be sure to get the right product to complete your motor transfirmation as the blocks were also the same except for the main caps so bid with confidence they'll work just fine.[/size]

    https://www.ebay.com/itm/Mexican-30…~UAAOSwZL5dtzUR

    -Fred-

  • NOS C3OZ 6211 M Std. Size Rod Bearing

    Quote from C6ZZKGT


    Here is an Ebay auction for 8 NOS C3OZ 6211 M standard size Hipo rod bearings by Ebay member "peydaw_0" with a Buy-It-Now of $85.00 or make offer:

    Nos 1963 Ford 289-289 Hipo Bearing Lot Of 8 C3OZ-6211-G C3OZ-6211-M. Condition is New. Boxes never opened say standard bearings but has two different letters at the end e-mail me any questions Thanks Peyton

    https://www.ebay.com/itm/Nos-1963-F…3kAAOSwlThdlf9y

    -Fred-

    Please note that there are only five C3OZ 6211 M bearing sets here that fit Hipo 289 engines. The C3OZ 6211 G bearings are for a 170, 200 or 250 inch six cylinder engine. I have already notified the seller of this.

    -Fred-

  • C4OE Hipo Flex Plate

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1537086531…em=153708653117

    -Fred-

  • C4OE Hipo Flex Plate

    Quote from C6ZZKGT


    Here is an Ebay auction for a used C4OE Hipo flex plate by Ebay member "magmustangs" with a Buy-It-Now of $499.00:

    1963-1967 Ford Mustang, GT, GTA, Shelby GT350, Fairlane 500. C4 Automatic FLEX PLATE for 289 HIPO. 160 TOOTH. Measures approx. 13 3/8" Overall Diameter. . This is an ORIGINAL FORD PART. The Plate is stamped (FoMoCo) and the counterweight is stamped C4OE-6375-C. .. . Removed from 1966 Mustang Fastback with 289 HIPO and C4 A/T Trans. .. . The Flex Plate is in Great Condition. There is some wear on the ring gear teeth. No Dents or Dings. Has a Natural Metal Finish and looks Great. No Real Rust.. No Cracks. Overall, this is a Great Original 289 HIPO with C4 Flex Plate.

    https://www.ebay.com/itm/63-1964-19…8MAAOSw9Clc1KBz

    -Fred-

    This used C4OE Hipo flex plate received no bids by May 16, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1534922685…em=153492268536

    -Fred-

    This used C4OE Hipo flex plate received no bids by May 23, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637036643…=STRK:MEWAX:VRI

    -Fred-

    This used C4OE Hipo flex plate received no bids by May 30, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637134810…em=163713481071

    -Fred-

    This used C4OE Hipo flex plate received no bids by June 6, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1535172728…em=153517272878

    -Fred-

    This used C4OE Hipo flex plate received no bids by June 13, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637343077…em=163734307765

    -Fred-

    This used C4OE Hipo flex plate received no bids by June 20, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637458878…em=163745887827

    -Fred-


    This used C4OE Hipo flex plate received no bids by June 27, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637554169…em=163755416901

    -Fred-


    This used C4OE Hipo flex plate received no bids by July 4, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637651876…em=163765187619

    -Fred-


    This used C4OE Hipo flex plate received no bids by July 11, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637740176…em=163774017698

    -Fred-


    This used C4OE Hipo flex plate received no bids by July 18, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637829811…em=163782981176

    -Fred-


    This used C4OE Hipo flex plate received no bids by July 25, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1535808361…em=153580836131

    -Fred-


    This used C4OE Hipo flex plate received no bids by August 1, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638014058…em=163801405863

    -Fred-


    This used C4OE Hipo flex plate received no bids by August 8, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1535975779…em=153597577976

    -Fred-


    This used C4OE Hipo flex plate received no bids by August 16, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1536068508…em=153606850890

    -Fred-


    This used C4OE Hipo flex plate received no bids by August 23, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638315917…em=163831591732

    -Fred-


    This used C4OE Hipo flex plate received no bids by August 30, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638407910…em=163840791032

    -Fred-


    This used C4OE Hipo flex plate received no bids by September 6, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638511630…em=163851163025

    -Fred-


    This used C4OE Hipo flex plate received no bids by September 13, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638615336…em=163861533649

    -Fred-


    This used C4OE Hipo flex plate received no bids by September 20, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638728717…em=163872871709

    -Fred-


    This used C4OE Hipo flex plate received no bids by September 27, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1536624690…em=153662469067

    -Fred-


    This used C4OE Hipo flex plate received no bids by October 5, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1536729783…em=153672978396

    -Fred-


    This used C4OE Hipo flex plate received no bids by October 12, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1639037067…em=163903706767

    -Fred-

    This used C4OE Hipo flex plate received no bids by October 19, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1639121292…em=163912129206

    -Fred-


    This used C4OE Hipo flex plate received no bids by October 26, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1536999720…em=153699972007

    -Fred-


    This used C4OE Hipo flex plate received no bids by November 2, 2019 and therefore did NOT sell.

    -Fred-

  • NOS D1AZ 12A132 A dual point conversion kit

    Quote from C6ZZKGT


    Here is an Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

    I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts to the up coming younger generations to use. You are bidding on a **NOS 289 HiPo service replacement (K) code dual point distributor breaker plate kit. Part number on NOS Motorcraft box D1AZ-12A132-A. Comes complete with all NOS Motorcraft points & condenser in pictures & mounting hardware & springs & instruction paper. Does come with a Motorcraft box. This is 100% correct for the 289 HiPo (K) code distributor & 427 HP (W) code distributor. 100% correct Motorcraft kit for changing any single point Ford housing: FoMoCo, Autolite, Motorcraft distributor to a dual point distributor. Correct for the 1964 to 1974 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with a Ford engine. **Shipping includes FREE insurance in the USA. **I post a Buy It Now or just bid freely.** *** Will ship outside the USA shipping Air Mail cost will be added*** ***Remember Original Ford parts give the best Performance***

    https://www.ebay.com/itm/289-HiPo-M…m4383.l4275.c10

    -Fred-

    This NOS D1AZ 12A132 A dual point conversion kit received no bids by October 3, 2019 and therefore did NOT sell.

    -Fred-


    This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again as a reserve price auction with a starting bid of $9.95:

    https://www.ebay.com/itm/3627765703…em=362776570386

    -Fred-


    This NOS D1AZ 12A132 A dual point conversion kit received 12 bids to $76.00 from 5 bidders by October 3, 2019 but did not meet the sellers reserve and therefore did NOT sell.

    -Fred-


    This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again as a standard auction with a starting bid of $49.95:

    https://www.ebay.com/itm/3627931657…em=362793165706

    -Fred-


    This NOS D1AZ 12A132 A dual point conversion kit sold November 3, 2019 on Ebay for $125.00.

    -Fred-

  • 5R07K142861

    Quote from Abandoned_classics


    Water pump, fuel pump, air cleaner and fan are MIA. Timing cover is correct. I got two sets of correct exhaust manifolds with the deal as well as a CJ flex plate. the fuel pump and fan may be in the garage somewhere, the gentleman that passed away had a lot of high dollar cars and parts in this garage. He disassembled almost everything and never put it back together. The distributor in the engine now is not the correct one. But the right one was laying close by. Good thing I looked, not bad for $4500 I don’t think.

    Yes, I would say that you made an excellent deal on that engine.

    -Fred-

  • 5R07K142861

    Quote from C6ZZKGT

    You are correct. I have a K code fastback with a 351 Windsor in it right now. I just bought a bunch of parts from a garage south of Tucson, including that K engine. The engine is mostly complete and is vin stamped with 5R07K142861. I have not checked all of the date codes and am not sure if it’s 5 or 6 bolt block. I will check when I get home!


    Abandoned_classics

    If you post the VIN for your fastback, it is possible that you may locate your original engine or pieces.

    -Fred-

    5R09K241895 I believe it’s in a registry already. I found it in a yard in Pinetop, Arizona. no motor or trans.

    ==================================================================================

    I just checked all of my blocks and I am sorry but I do not have yours.

    -Fred-

  • 5R07K142861

    Quote from C6ZZKGT

    Chuck, The way that I read the OP message here is that he only has the engine. In that case the VIN posted must have come from the engine. If it is the approximate production date of the Kar was late September 1964 and would be a 6 bolt block. I certainly could be wrong on where the VIN came from but these are my thoughts.

    -Fred-

    You are correct. I have a K code fastback with a 351 Windsor in it right now. I just bought a bunch of parts from a garage south of Tucson, including that K engine. The engine is mostly complete and is vin stamped with 5R07K142861. I have not checked all of the date codes and am not sure if it’s 5 or 6 bolt block. I will check when I get home!


    Abandoned_classics

    If you post the VIN for your fastback, it is possible that you may locate your original engine or pieces.

    -Fred-

  • Replacement Timing Set

    Excellent detailed information on these cams. Thanks for posting this.

    -Fred-

  • 5R07K142861

    Quote from chucks302


    Is there a vin on the block, any details on condition 5 or 6 bolt, date codes ,location,do you have a price for it.

    Chuck, The way that I read the OP message here is that he only has the engine. In that case the VIN posted must have come from the engine. If it is the approximate production date of the Kar was late September 1964 and would be a 6 bolt block. I certainly could be wrong on where the VIN came from but these are my thoughts.

    -Fred-

  • NOS C2OZ 6565 B Engine Push Rods

    This set of 16 NOS C2OZ 6565 B engine push rods sold October 30, 2019 on Ebay for $250.00.

    -Fred-

  • Used Hipo Chrome Valve Covers

    Here is an Ebay auction for a pair of used early Hipo chrome valve covers by Ebay seller "fordcobrajet428" with a starting bid of $250.00:

    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1740803589…em=174080358991

    -Fred-