Posts by C6ZZKGT

  • Carburetor C6ZF



    Eddie, Thank you for posting the pictures.

    The Mustangs Etc. manual choke setup is a really good kit as they went to a lot of trouble to correct issues on earlier vendors versions. It is almost exactly like original except for the rod going to from the fast idle cam to the choke plate. The original rod had a bump in it that held the spring where their rod uses an "E" clip in a slot for this. Earlier versions by different vendors were the same. Mustangs Etc. tried to get that bump put in the rod but could not find a source as the process is complicated. This is really not noticeable unless you were really looking for it. I have personally been involved with Mustang Etc. on the reproduction of this linkage as I have supplied original samples.

    Which brass tube are you missing?

    How badly bent is the throttle linkage? is it just where the throttle rod connects to the carburetor? Keep in mind that the throttle rod needs to come from a 1.12 venturi carburetor and NOT a 1.08 as the slots for the throttle plates are too small on the 1.08 version.

    The rear venture booster does not use a check ball. The check ball in the primary is for the accelerator pump.

    I have a good used dashpot bracket and NOS dashpot. Email me on this, please.

    -Fred-

  • Used Hipo Exhaust Manifold

    This pair of used Hipo exhaust manifolds is back on Ebay again with no changes:

    https://www.ebay.com/itm/2237826075…em=223782607531

    -Fred-

  • NOS D0AZ 12A132 B Dual Point Conversion Kit

    This NOS D0AZ 12A132 B dual point conversion kit received no bids by April 14, 2019 and therefore did NOT sell.

    -Fred-


    This NOS D0AZ 12A132 B dual point conversion kit is back on Ebay again with no changes:

    https://www.ebay.com/itm/2930500341…em=293050034126

    -Fred-


    This NOS D0AZ 12A132 B dual point conversion kit sold December 5, 2019 on Ebay for $249.95.

    -Fred-

  • NOS C3OZ 6256 A Early Camshaft Sprocket

    Quote from C6ZZKGT


    Here is an Ebay auction for an NOS C3OZ 6256 A Hipo camshaft sprocket by Ebay member "289special" with a Buy-It-Now of $100.00:

    [size=4]This is one nos Ford cam sprocket. New service part. Part number C3OZ-A For 1963 1964 AC Cobra 289 hipo eng. This is the thin sprocket. Box is tattered. Do your homework. Know your part. Ask questions. Buyer pays $15.00 shipping and handling 48 United States only. [/size]

    [size=2]https://www.ebay.com/itm/NOS-1963-1…qkAAOSwi6tdFhV7[/size]

    -Fred-

    This Ebay auction for an NOS C3OZ 6256 A Hipo camshaft sprocket was ended by the seller October 25, 2019 with the following explanation "This listing was ended by the seller because the item is no longer available".

    -Fred-


    This Ebay auction for an NOS C3OZ 6256 A Hipo camshaft sprocket that was no longer available is back on Ebay again with a new higher Buy-It-Now of $125.00 or make offer:

    https://www.ebay.com/itm/2645482927…=STRK:MEWAX:VRI

    -Fred-


    This NOS C3OZ 6256 A Hipo camshaft sprocket sold December 4, 2019 on Ebay for $125.00.

    -Fred-

  • Used C5OE Heads

    The seller seems to be honest in their description but does not truly understand the significance of the cracks around the studs. These cracks usually happen from using aftermarket studs, of which some are meant for Chevy heads. They have a different finish where they seat on the head and can crack this rocker arm stud boss. This can, and usually does, get worse and is a major repair issue as there are very few places who can correct this problem. It is also very expensive to correct.

    -Fred-


    This pair of used C5OE heads sold December 5, 2019 on Ebay for $1,500.00.

    -Fred-


    If someone on this forum bought these heads and wants to know where they can get the cracks repaired properly, I do know of a quality place in California.

    -Fred-

  • Used C5OE Heads

    Quote from C6ZZKGT

    The seller seems to be honest in their description but does not truly understand the significance of the cracks around the studs. These cracks usually happen from using aftermarket studs, of which some are meant for Chevy heads. They have a different finish where they seat on the head and can crack this rocker arm stud boss. This can, and usually does, get worse and is a major repair issue as there are very few places who can correct this problem. It is also very expensive to correct.

    -Fred-

    This pair of used C5OE heads sold December 5, 2019 on Ebay for $1,500.00.

    -Fred-

  • Used Hipo Chrome Valve Covers

    Here is an Ebay auction for a pair of used early Hipo chrome valve covers by Ebay seller "fordcobrajet428" with a starting bid of $250.00:

    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1840703475…em=184070347555

    -Fred-

  • Used Hipo Chrome Valve Covers

    This pair of used early Hipo chrome valve covers received no bids by August 11, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1839191509…em=183919150922

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by August 20, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1839272429…em=183927242965

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by August 29, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1740174594…em=174017459412

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by September 9, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1839475326…em=183947532681

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by September 16, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1839595612…em=183959561228

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by September 24, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    -Fred-


    https://www.ebay.com/itm/1740432361…em=174043236144

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by October 2, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1740513745…em=174051374528

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by October 9, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1839904547…em=183990454707

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by October 17, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1840004790…em=184000479006

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by October 25, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1740803589…em=174080358991

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by November 5, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1740873316…em=174087331696

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by November 12, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1740963880…em=174096388077

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by November 21, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1840574272…em=184057427229

    -Fred-


    This pair of used early Hipo chrome valve covers received no bids by December 4, 2019 and therefore did NOT sell.

    -Fred-

  • Original 1963-64 Fairlane 289 High Performance Badges

    This used pair of 63-64 Fairlane High Performance emblems is back on Ebay again with no changes:

    https://www.ebay.com/itm/2645553768…em=264555376824

    -Fred-

  • NOS C3OZ 6378 A Crankshaft Washer

    This NOS crankshaft washer is back on Ebay with no changes:

    https://www.ebay.com/itm/2645553797…em=264555379763

    -Fred-

  • Repro C4AE 9510 V Tri Power Secondary Carburetor

    This new repro Tri Power secondary carburetor sold December 1, 2019 on Ebay for $300.00.

    -Fred-

  • NOS C5ZZ 6038 A Motor Mount Insulator

    This pair of NOS C5ZZ 6038 A Hipo motor mount insulators are back on Ebay again with no changes:

    https://www.ebay.com/itm/2334226145…em=233422614558

    -Fred-

  • NOS C5ZZ 6038 A Motor Mount Insulator

    This pair of NOS C5ZZ 6038 A Hipo motor mount insulators received no bids by November 5, 2019 and therefore did NOT sell.

    -Fred-


    This pair of NOS C5ZZ 6038 A Hipo motor mount insulators are back on Ebay again with no changes:

    https://www.ebay.com/itm/2333918306…em=233391830619

    -Fred-


    This pair of NOS C5ZZ 6038 A Hipo motor mount insulators received no bids by November 12, 2019 and therefore did NOT sell.

    -Fred-


    This pair of NOS C5ZZ 6038 A Hipo motor mount insulators are back on Ebay again with no changes:

    https://www.ebay.com/itm/3333952651…em=333395265158

    -Fred-


    This pair of NOS C5ZZ 6038 A Hipo motor mount insulators received no bids by November 19, 2019 and therefore did NOT sell.

    -Fred-


    This pair of NOS C5ZZ 6038 A Hipo motor mount insulators are back on Ebay again with no changes:

    https://www.ebay.com/itm/3334041582…em=333404158245

    -Fred-


    This pair of NOS C5ZZ 6038 A Hipo motor mount insulators received no bids by November 26, 2019 and therefore did NOT sell.

    -Fred-


    This pair of NOS C5ZZ 6038 A Hipo motor mount insulators are back on Ebay again with a new lower starting bid of $178.00:

    https://www.ebay.com/itm/3334135215…em=333413521556

    -Fred-


    This pair of NOS C5ZZ 6038 A Hipo motor mount insulators received no bids by December 3, 2019 and therefore did NOT sell.

    -Fred-

  • NOS D1AZ 12A132 A dual point conversion kit

    Quote from C6ZZKGT


    Here is an Ebay auction for an NOS D1AZ 12A132 A dual point conversion kit by Ebay member "mysunshine302" with a starting bid of $150.00 and a Buy-It-Now of $195.00:

    I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts to the up coming younger generations to use. You are bidding on a **NOS 289 HiPo service replacement (K) code dual point distributor breaker plate kit. Part number on NOS Motorcraft box D1AZ-12A132-A. Comes complete with all NOS Motorcraft points & condenser in pictures & mounting hardware & springs & instruction paper. Does come with a Motorcraft box. This is 100% correct for the 289 HiPo (K) code distributor & 427 HP (W) code distributor. 100% correct Motorcraft kit for changing any single point Ford housing: FoMoCo, Autolite, Motorcraft distributor to a dual point distributor. Correct for the 1964 to 1974 Mustang, Shelby Mustang, Torino, Fairlane, Galaxie, Mercury Cougar, Mercury Cyclone, Mercury Comet & full size Mercury & full size Ford cars all with a Ford engine. **Shipping includes FREE insurance in the USA. **I post a Buy It Now or just bid freely.** *** Will ship outside the USA shipping Air Mail cost will be added*** ***Remember Original Ford parts give the best Performance***

    https://www.ebay.com/itm/289-HiPo-M…m4383.l4275.c10

    -Fred-

    This NOS D1AZ 12A132 A dual point conversion kit received no bids by October 3, 2019 and therefore did NOT sell.

    -Fred-


    This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again as a reserve price auction with a starting bid of $9.95:

    https://www.ebay.com/itm/3627765703…em=362776570386

    -Fred-


    This NOS D1AZ 12A132 A dual point conversion kit received 12 bids to $76.00 from 5 bidders by October 3, 2019 but did not meet the sellers reserve and therefore did NOT sell.

    -Fred-


    This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again as a standard auction with a starting bid of $49.95:

    https://www.ebay.com/itm/3627931657…em=362793165706

    -Fred-


    This NOS D1AZ 12A132 A dual point conversion kit sold November 3, 2019 on Ebay for $125.00.

    -Fred-


    This seller has another NOS D1AZ 12A132 A dual point conversion kit on Ebay again as a standard auction with a much higher starting bid of $95.00:

    https://www.ebay.com/itm/3628285207…em=362828520730

    -Fred-


    This NOS D1AZ 12A132 A dual point conversion kit sold December 3, 2019 on Ebay for $96.00 with 2 bids from 2 bidders.

    -Fred-

  • Used 289 Carburetor Spacer Plate

    This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

    https://www.ebay.com/itm/1537478876…em=153747887694

    -Fred-

  • Used 289 Carburetor Spacer Plate

    Quote from C6ZZKGT


    Here is an Ebay auction for a used Hipo 289 carburetor spacer with PCV by Ebay member "magmustangs" with a starting bid of $99.00:

    1964-1969 Ford Mustang, GT, GTA, GT/CS, Mach 1, Grande, Shelby GT350, Falcon, Fairlane, Torino, Ranchero, Mercury Cougar, XR7, Eliminator, Montego, Comet, Cyclone. ORIGINAL 4V CARBURETOR SPACER For 289-HIPO-302-351W Engine. 1" HEIGHT. This is an ORIGINAL FORD PART. Casting Number C4OE-9A589-A and (FoMoCo). Removed from a 65 Mustang GT Fastback with 289 4V Motor. This Spacer is in Great Original Condition. It is Clean and Straight. Has a Natural Metal Finish and Looks Great. Smooth Gasket Surfaces. No heavy Build-Up on the inside. Has a Good PCV Port Tube. Not clogged. No Cracks. No rust or corrosion. Overall, this is a Great Original 4V Carburetor Spacer. Please email with questions. 100719-2 WE HAVE AN EBAY STORE WITH THOUSANDS OF ORIGINAL FORD PARTS. CHECK IT OUT.

    https://www.ebay.com/itm/1964-1965-…rIAAOSw1Txdm6uf

    -Fred-

    This used Hipo 289 carburetor spacer received no bids by November 4, 2019 and therefore did NOT sell.

    -Fred-


    This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

    https://www.ebay.com/itm/1537110679…em=153711067985

    -Fred-


    This used Hipo 289 carburetor spacer received no bids by November 11, 2019 and therefore did NOT sell.

    -Fred-


    This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

    https://www.ebay.com/itm/1537216302…em=153721630264

    -Fred-


    This used Hipo 289 carburetor spacer received no bids by November 18, 2019 and therefore did NOT sell.

    -Fred-


    This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

    https://www.ebay.com/itm/1639508294…em=163950829463

    -Fred-


    This used Hipo 289 carburetor spacer received no bids by November 25, 2019 and therefore did NOT sell.

    -Fred-


    This used Hipo 289 carburetor spacer is back on Ebay again with no changes:

    https://www.ebay.com/itm/1537389607…em=153738960714

    -Fred-


    This used Hipo 289 carburetor spacer received no bids by December 2, 2019 and therefore did NOT sell.

    -Fred-

  • Used C7ZE Harmonic Balancer

    Here is an Ebay auction for a used C7ZE Hipo harmonic balancer by Ebay member "acman63" with a Buy-It-Now of $475.00:

    [size=4]Shelby Gt350 Hipo Balancer Super rare AC . This is a very rare balancer used on 67 cars with AC . Ive kept track of these balancers and so far Ive seen 6 like this .The center casting was originally marked C5OE A. The 5 and the O were hammered out and restamped with 7 and E creating a C7ZE A.
    [/size][size=4]The outer ring is the 68 style with the step at the back and with a wider inner diameter at the front to allow for fitting the larger 3 gang A/C pulley first used on 67 HiPO. The L6 is indeed Nov. 66. This is original production part.[/size]
    [size=4]It seems Ford used existing C5OE centers to produce the very few balancers needed for AC equipped HiPo motors in 1967. By 68 production the center casting changed to a C8ZE A which also became the default service part.
    If you try to fit an original 67 A/C crank pulley to the C5OE balancer you will see that it will not fit or will fit so tight as to bind on the outer ring. This is is in great condition. I stripped it to bare metal so you can see the quality of the piece , great rubber . no wear on the shaft . Paint and install. (BOX 6)[/size]

    [size=4][size=4]$495 BIN [/size][/size]

    [size=2][size=2]https://www.ebay.com/itm/Shelby-Gt350-Hipo-Balancer-Super-rare-AC-/362547277228?_trksid=p2385738.m4383.l4275.c10[/size][/size]

    -Fred-