Posts by C6ZZKGT

    Quote from C6ZZKGT


    Here is an Ebay auction for a restored FoMoCo Hipo distributor by Ebay member "mysunshine302" with a starting bid of $9.95 on a reserve auction:

    I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts too the up coming younger generations to use.
    You are bidding on a professionally *totally restored *Original 289 HiPo FoMoCo housing (K) code dual point distributor. ***This is not a service replacement Motorcraft or Autolite replacement housing HiPo dual point distributor. This is a 100% original used FoMoCo housing HiPo dual point distributor. It has been set up to original 1966 factory 289 HiPo spec. Ready to install and Rev!**This would make a great early Christmas gift.**
    Part number on original FoMoCo housing C50F-12127-E date code 6D1 = April, first week of 1966. Part number cast on lower aluminum housing C5OF-12131-B. Correct for the early 289 HiPo (K) code engine in the Shelby GT350 & AC Cobra & Ford Mustang GT & Ford Fairlane GT & Ford Falcon Sprint & Mercury Comet & Mercury Cougar XR7 & Mercury Cyclone & Spoiler. This is a great find of a original 1966 early 289 HiPo *FoMoCo housing dual point distributor. Great if your building a concours show car or you lost your 289 HiPo distributor or building a HiPo car or HiPo engine to sell.
    Comes complete as in all the pictures with ***All NOS Motorcraft points & NOS condenser & NOS dual point breaker plate & NOS primary wire installed & NOS screw & hardware & New shaft bushing & NOS gear.
    Still has nice looking original patina aluminum & machine finish.**NOT Spray Painted****Ready to install & run!

    https://www.ebay.com/itm/289-HiPo-F…utorefresh=true

    -Fred-

    Please note that this distributor has an odd date code as the date codes in this era were a number for the year and then 2 letters for the month and week of the month.

    -Fred-

    Here is an Ebay auction for a restored FoMoCo Hipo distributor by Ebay member "mysunshine302" with a starting bid of $9.95 on a reserve auction:

    I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts too the up coming younger generations to use.
    You are bidding on a professionally *totally restored *Original 289 HiPo FoMoCo housing (K) code dual point distributor. ***This is not a service replacement Motorcraft or Autolite replacement housing HiPo dual point distributor. This is a 100% original used FoMoCo housing HiPo dual point distributor. It has been set up to original 1966 factory 289 HiPo spec. Ready to install and Rev!
    **This would make a great early Christmas gift.**
    Part number on original FoMoCo housing C50F-12127-E date code 6D1 = April, first week of 1966. Part number cast on lower aluminum housing C5OF-12131-B. Correct for the early 289 HiPo (K) code engine in the Shelby GT350 & AC Cobra & Ford Mustang GT & Ford Fairlane GT & Ford Falcon Sprint & Mercury Comet & Mercury Cougar XR7 & Mercury Cyclone & Spoiler. This is a great find of a original 1966 early 289 HiPo *FoMoCo housing dual point distributor. Great if your building a concours show car or you lost your 289 HiPo distributor or building a HiPo car or HiPo engine to sell.
    Comes complete as in all the pictures with ***All NOS Motorcraft points & NOS condenser & NOS dual point breaker plate & NOS primary wire installed & NOS screw & hardware & New shaft bushing & NOS gear.
    Still has nice looking original patina aluminum & machine finish.**NOT Spray Painted**
    **Ready to install & run!

    https://www.ebay.com/itm/289-HiPo-F…utorefresh=true

    -Fred-

    This NOS C5ZZ 15520 A switch is back on Ebay again with no changes:

    https://www.ebay.com/itm/2028401067…em=202840106748

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1639797791…em=163979779190

    -Fred-

    Quote from C6ZZKGT


    Here is an Ebay auction for a used C4OE Hipo flex plate by Ebay member "magmustangs" with a Buy-It-Now of $499.00:

    1963-1967 Ford Mustang, GT, GTA, Shelby GT350, Fairlane 500. C4 Automatic FLEX PLATE for 289 HIPO. 160 TOOTH. Measures approx. 13 3/8" Overall Diameter. . This is an ORIGINAL FORD PART. The Plate is stamped (FoMoCo) and the counterweight is stamped C4OE-6375-C. .. . Removed from 1966 Mustang Fastback with 289 HIPO and C4 A/T Trans. .. . The Flex Plate is in Great Condition. There is some wear on the ring gear teeth. No Dents or Dings. Has a Natural Metal Finish and looks Great. No Real Rust.. No Cracks. Overall, this is a Great Original 289 HIPO with C4 Flex Plate.

    https://www.ebay.com/itm/63-1964-19…8MAAOSw9Clc1KBz

    -Fred-

    This used C4OE Hipo flex plate received no bids by May 16, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1534922685…em=153492268536

    -Fred-

    This used C4OE Hipo flex plate received no bids by May 23, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637036643…=STRK:MEWAX:VRI

    -Fred-

    This used C4OE Hipo flex plate received no bids by May 30, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637134810…em=163713481071

    -Fred-

    This used C4OE Hipo flex plate received no bids by June 6, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1535172728…em=153517272878

    -Fred-

    This used C4OE Hipo flex plate received no bids by June 13, 2019 and therefore did NOT sell.

    -Fred-

    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637343077…em=163734307765

    -Fred-

    This used C4OE Hipo flex plate received no bids by June 20, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637458878…em=163745887827

    -Fred-


    This used C4OE Hipo flex plate received no bids by June 27, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637554169…em=163755416901

    -Fred-


    This used C4OE Hipo flex plate received no bids by July 4, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637651876…em=163765187619

    -Fred-


    This used C4OE Hipo flex plate received no bids by July 11, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637740176…em=163774017698

    -Fred-


    This used C4OE Hipo flex plate received no bids by July 18, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1637829811…em=163782981176

    -Fred-


    This used C4OE Hipo flex plate received no bids by July 25, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1535808361…em=153580836131

    -Fred-


    This used C4OE Hipo flex plate received no bids by August 1, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638014058…em=163801405863

    -Fred-


    This used C4OE Hipo flex plate received no bids by August 8, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1535975779…em=153597577976

    -Fred-


    This used C4OE Hipo flex plate received no bids by August 16, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1536068508…em=153606850890

    -Fred-


    This used C4OE Hipo flex plate received no bids by August 23, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638315917…em=163831591732

    -Fred-


    This used C4OE Hipo flex plate received no bids by August 30, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638407910…em=163840791032

    -Fred-


    This used C4OE Hipo flex plate received no bids by September 6, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638511630…em=163851163025

    -Fred-


    This used C4OE Hipo flex plate received no bids by September 13, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638615336…em=163861533649

    -Fred-


    This used C4OE Hipo flex plate received no bids by September 20, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1638728717…em=163872871709

    -Fred-


    This used C4OE Hipo flex plate received no bids by September 27, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1536624690…em=153662469067

    -Fred-


    This used C4OE Hipo flex plate received no bids by October 5, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1536729783…em=153672978396

    -Fred-


    This used C4OE Hipo flex plate received no bids by October 12, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1639037067…em=163903706767

    -Fred-

    This used C4OE Hipo flex plate received no bids by October 19, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1639121292…em=163912129206

    -Fred-


    This used C4OE Hipo flex plate received no bids by October 26, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1536999720…em=153699972007

    -Fred-


    This used C4OE Hipo flex plate received no bids by November 2, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1537086531…em=153708653117

    -Fred-


    This used C4OE Hipo flex plate received no bids by November 9, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1537187515…em=153718751508

    -Fred-


    This used C4OE Hipo flex plate received no bids by November 16, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1537278422…em=153727842216

    -Fred-


    This used C4OE Hipo flex plate received no bids by November 23, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1639594461…em=163959446157

    -Fred-


    This used C4OE Hipo flex plate received no bids by December 1, 2019 and therefore did NOT sell.

    -Fred-


    This used C4OE Hipo flex plate is back on Ebay again with no changes:

    https://www.ebay.com/itm/1537461532…em=153746153241

    -Fred-


    This used C4OE Hipo flex plate received no bids by December 8, 2019 and therefore did NOT sell.

    -Fred-

    Quote from C6ZZKGT


    Here is an Ebay auction for a pair of used 65 early 66 engine frame mount brackets by Ebay member "magmustangs" with a starting bid of $599.00:

    1964.5-Early1966 Ford Mustang, Fastback, Coupe, Convertible, GT, Shelby GT350. 289 HIPO Motor Mount Frame Brackets. LH and RH Sides. These are ORIGINAL FORD PARTS. Casting Numbers C4ZA-6C041-B and C4ZA-6A030-B. Removed from a 1965 Mustang GT Fastback With 289 HIPO. The Brackets are in Excellent Original Condition.. Very Clean and look Great. No real Rust or pitting.. No Cracks or Splits. Overall, these are Excellent Original 289 HIPO Motor Mount Brackets.. Impossible To Find Original. Please email with any questions..

    https://www.ebay.com/itm/1964-1-2-1…J4AAOSwPk1dvKzH

    -Fred-

    This pair of used 65 early 66 engine frame mount brackets received no bids by December 8, 2019 and therefore did NOT sell.

    -Fred-

    Note that this is the least desirable distributor as Ford modified single point housings to make these up. This was Fords last ditch effort to supply these distributors before they went obsolete.

    -Fred-


    This NOS C5OZ 12127 E Motorcraft Hipo distributor sold December 8, 2019 on Ebay for $425.00 with 23 bids from 5 bidders.

    -Fred-


    This is the highest price that I have seen paid for this least of desirable styles of NOS Motorcraft distributors.

    -Fred-

    Quote from C6ZZKGT

    Note that this is the least desirable distributor as Ford modified single point housings to make these up. This was Fords last ditch effort to supply these distributors before they went obsolete.

    -Fred-

    This NOS C5OZ 12127 E Motorcraft Hipo distributor sold December 8, 2019 on Ebay for $425.00 with 23 bids from 5 bidders.

    -Fred-

    Quote from C6ZZKGT


    Here is an Ebay auction for a used high profile 8K Rally Pac by Ebay member "gtc350" with a Buy-It-Now of $500.00 or make offer:

    1965 Ford Mustang 8,000 RPM Rally Pac Factory Original HIPO 289 K Code. Condition is Used. It worked when I took it off vehicle in 2010 , has been carefully stored ever since . Shipped with USPS Priority Mail.

    https://www.ebay.com/itm/1965-Ford-…yYAAOSw8eJdzGQG

    -Fred-

    Being as this unit is claimed by the seller to have worked in 2010, the seller must have had quite a fight removing it as all of the wires are cut.

    -Fred-

    Here is an Ebay auction for a pair of used 65 early 66 engine frame mount brackets by Ebay member "magmustangs" with a starting bid of $599.00:

    1964.5-Early1966 Ford Mustang, Fastback, Coupe, Convertible, GT, Shelby GT350. 289 HIPO Motor Mount Frame Brackets. LH and RH Sides. These are ORIGINAL FORD PARTS. Casting Numbers C4ZA-6C041-B and C4ZA-6A030-B. Removed from a 1965 Mustang GT Fastback With 289 HIPO. The Brackets are in Excellent Original Condition.. Very Clean and look Great. No real Rust or pitting.. No Cracks or Splits. Overall, these are Excellent Original 289 HIPO Motor Mount Brackets.. Impossible To Find Original. Please email with any questions..

    https://www.ebay.com/itm/1964-1-2-1…J4AAOSwPk1dvKzH

    -Fred-

    Quote from C6ZZKGT


    Here is an Ebay auction for a used C3OE Hipo harmonic balancer by Ebay member "cincop8" with a Buy-It-Now of $695.00 or make offer:

    Fits 1964 1965 1966 1967 K code 289. Hipo harmonic balancer. C3OE original ford hipo 289. Early production probably from a 1964 Ford hipo Fairlane , Sunbeam Tiger ,Shelby, Cobra or 1964.5 mustang. Good original condition. Rare item.

    https://www.ebay.com/itm/K-code-196…FcAAOSwEEVdTHdP

    -Fred-

    Buy-It-Now is now lowered to $525.00.

    -Fred-

    Note that this is the least desirable distributor as Ford modified single point housings to make these up. This was Fords last ditch effort to supply these distributors before they went obsolete.

    -Fred-

    Here is an Ebay auction for an NOS C5OZ 12127 E Motorcraft Hipo distributor by Ebay member "mysunshine302" with a starting bid of $9.95 on a reserve auction:

    I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts too the up coming younger generations to use.
    You are bidding on a original NOS 289 HiPo Motorcraft housing (K) code dual point distributor. Part number C5OF-12127-E ***This is a service replacement Motorcraft housing HiPo 289 dual point distributor. It has never been installed. ***(It is a Virgin)!*** Ready to install and Rev!!!!!!!!!!! **This would make a great early Christmas gift for you or a love one!**

    Part number on original NOS Ford / Motorcraft box C50Z-12127-E. Correct for the early 289 HiPo (K) code engine in the Shelby GT350 & AC Cobra & Ford Mustang GT & Ford Fairlane GT & Ford Falcon Sprint & Mercury Comet & Mercury Cougar XR7 & Mercury Cyclone & Spoiler. This is a great find of a original NOS 289 HiPo Motorcraft housing dual point distributor. Great if your building a show car or you lost your 289 HiPo distributor or building a HiPo car or HiPo engine to sell.
    Comes complete as in all the pictures with ***All NOS Motorcraft points & NOS condenser & NOS dual point breaker plate & NOS primary wire & NOS screw & hardware. & ** NOS Ford box**
    Still has nice 100% looking original patina aluminum & machine finish.
    **Ready to install & run!
                                      
    Please ask questions before auction ends!
                                         
    ****Please check out my other Ford parts*****
    ***I can post a Buy It Now if you would like. Or just bid freely.
    ** Shipping includes *Free insurance in the USA.
    If purchase outside the USA, Air Mail shipping fee will be added.
                                       
    Remember USA made original FORD parts give the best Performance!!!
    Please check out my other Ford Parts!

    https://www.ebay.com/itm/289-HiPo-N…ZgAAOSwPc1dvx7K

    -Fred-

    Here is an Ebay auction for a used Hipo 289 carburetor spacer by Ebay member "fordmanted2b2b" with a Buy-It-Now of $74.99:

    OEM ORIGINAL FORD 4V ALUM. CARB SPACER -1" THICK AND USED ON ALL FORD/HOLLEY REGULAR BASES. HAVE SEVERAL IN GOOD SHAPE. STORED FOR MANY YEARS AND SOLD A LOT WHEN NEW . KEEPS FUEL COOLER DUE TO HOLLOW SPACE IN HOT WEATHER WITH THICK GASKETS AND LONGER STUDS. STAMPED C40E-9A589-E INSIDE. PVC HOLE ON SOME AND NO HOLE ON OTHERS. THANKS FOR LOOKING TAKE CARE AND GOD BLESS fordmanted2b2b FREE SHIPPING

    https://www.ebay.com/itm/OEM-Ford-C…~YAAOSwMg5cKKGo

    -Fred-

    Here is an Ebay auction for a used C8ZE replacement Hipo harmonic balancer by Ebay member "fordmanted2b2b" with a Buy-It-Now of $300.00:

    [size=4]RARE 289 HIPO REPLACEMENT C/SHAFT DAMPNER THAT FOMOCO USED TO REPLACE ORIGINAL CUT BACK C5OE DAMPNER. IT DOES SAME JOB W/O COUNTERWEIGHT THAT I AM LISTING SEPARATELY IN OTHER AD. NEED TO USE WITH 289 1" BLOCK AND 1M CRANK ONLY. THIS ONE ISN'T BEAT UP EITHER LIKE SOME LISTED BEFORE. IT WASN'T USED VERY LONG ON ENGINE DUE TO ROD THROWN BY OVER REVING. REASON IT STILL LOOKS NEW. RUBBER SEAL IN GOOD SHAPE. VERY HEAVY COMPARED TO STOCK ONE.THANKS FOR LOOKING TAKE CARE AND GOD BLESS fordmanted2b2b [/size]

    [size=4] PRICE DROPPED FROM $350 TO $300 DUE TO GIFT SEASON. SURPRISE SOME ONE. MERRY CHRISTMAS POSTED ONE POUND UNTIL LOCATION KNOWN. [/size]

    [size=2]https://www.ebay.com/itm/RARE-65-67…C0AAOSwRWZcHzvj[/size]

    -Fred-

    Quote from C6ZZKGT


    Here is an Ebay auction for an NOS C3OZ 6A360 A counterweight and an NOS C3OZ 6306 A crank sprocket by Ebay member "ford-speed" with a Buy-It-Now of $376.64 US:

    [size=5]THIS is a NOS - CRANKSHAFT SPROCKET and matching hatchet counterweight [/size]
    [size=5]Suit a Small block ford 289 Hi-Po / 271 Hp.[/size]
    [size=5][size=5]PART Number - [/size][/size][size=5]C3OZ 6306 A [/size]
    [size=5]Contact - Drew O4i4 7E4 8OE / maingirdles * gmail * com[/size]
    [size=5]Will pack it well and ship to anywhere in the world.[/size]

    https://www.ebay.com/itm/289-Hi-Po-…lhdVBdH&vxp=mtr

    -Fred-

    This setup is located in Australia.

    -Fred-

    Here is an Ebay auction for an NOS C3OZ 6A360 A counterweight and an NOS C3OZ 6306 A crank sprocket by Ebay member "ford-speed" with a Buy-It-Now of $376.64 US:

    [size=5]THIS is a NOS - CRANKSHAFT SPROCKET and matching hatchet counterweight [/size]
    [size=5]Suit a Small block ford 289 Hi-Po / 271 Hp.[/size]
    [size=5][size=5]PART Number - [/size][/size][size=5]C3OZ 6306 A [/size]
    [size=5]Contact - Drew O4i4 7E4 8OE / maingirdles * gmail * com[/size]
    [size=5]Will pack it well and ship to anywhere in the world.[/size]

    https://www.ebay.com/itm/289-Hi-Po-…lhdVBdH&vxp=mtr

    -Fred-

    Quote from C6ZZKGT


    Here is an Ebay auction for a used fully degreed C5OE Hipo harmonic balancer by Ebay member "4tuco25" with a Buy-It-Now of $725.00 or make offer:

    HIPO 289 1965 FULLY DEGREED COMPETITION BALANCER -ORIGINAL-. Condition is Used. These were used on factory R-Model 1965 1966 Shelby GT:350 Mustangs C50E.

    https://www.ebay.com/itm/HIPO-289-1…RkAAOSw6ktdGurD

    -Fred-

    The auction for this used fully degreed C5OE Hipo harmonic balancer was ended by the seller August 21, 2019 with the following explanation "This listing was ended by the seller because there was an error in the listing".

    -Fred-


    This Ebay auction for a used fully degreed C5OE Hipo harmonic balancer that was ended by the seller because of an error in the listing by Ebay member "4tuco25" is back on Ebay again with a starting bid of $675.00:

    1965 SHELBY HIPO 289 ORIGINAL COMPETITION FULLY DEGREED BALANCER.


    Hipo 289, cobra 289, 1965 r model Shelby, r model gt350 mustang, vintage competition shelby, gt40 1965, gt40 1966, hipo balancer, hipo 289 harmonic balancer, 1965 Shelby Mustang, 1966 Shelby Mustang, k code mustang, classic mustang, vintage competition mustang, fia 289, fia competition shelby

    https://www.ebay.com/itm/1965-SHELB…5.c100036.m2109


    -Fred-


    This used fully degreed C5OE harmonic balancer received no bids by October 28, 2019 and therefore did NOT sell.

    -Fred-


    This used fully degreed C5OE harmonic balancer is back on Ebay again with no changes:

    https://www.ebay.com/itm/1840130097…em=184013009701

    -Fred-


    This used fully degreed C5OE harmonic balancer received no bids by November 4, 2019 and therefore did NOT sell.

    -Fred-


    This used fully degreed C5OE harmonic balancer is back on Ebay again with a new lower starting bid of $625.00:

    https://www.ebay.com/itm/1840233118…em=184023311840

    -Fred-


    This used fully degreed C5OE harmonic balancer received no bids by November 11, 2019 and therefore did NOT sell.

    -Fred-


    This used fully degreed C5OE harmonic balancer is back on Ebay again with a new lower starting bid of $575.00:

    https://www.ebay.com/itm/1840367245…em=184036724575

    -Fred-


    This used fully degreed C5OE harmonic balancer received no bids by November 21, 2019 and therefore did NOT sell.

    -Fred-


    This used fully degreed C5OE harmonic balancer is back on Ebay again with no changes:

    https://www.ebay.com/itm/1840462137…em=184046213707

    -Fred-


    This used fully degreed C5OE harmonic balancer received no bids by November 26, 2019 and therefore did NOT sell.

    -Fred-


    This used fully degreed C5OE harmonic balancer is back on Ebay again with a new lower starting bid of $550.00:

    https://www.ebay.com/itm/1840560496…em=184056049625

    -Fred-


    This used fully degreed C5OE harmonic balancer received no bids by December 1, 2019 and therefore did NOT sell.

    -Fred-


    This used fully degreed C5OE harmonic balancer is back on Ebay again with no changes:

    https://www.ebay.com/itm/1840657825…em=184065782560

    -Fred-


    This used fully degreed C5OE harmonic balancer received no bids by December 6, 2019 and therefore did NOT sell.

    -Fred-