Posts by C6ZZKGT

  • Used C5OE Harmonic Balancer

    Quote from C6ZZKGT


    Here is an Ebay auction for a used fully degreed C5OE Hipo harmonic balancer by Ebay member "4tuco25" with a Buy-It-Now of $725.00 or make offer:

    HIPO 289 1965 FULLY DEGREED COMPETITION BALANCER -ORIGINAL-. Condition is Used. These were used on factory R-Model 1965 1966 Shelby GT:350 Mustangs C50E.

    https://www.ebay.com/itm/HIPO-289-1…RkAAOSw6ktdGurD

    -Fred-

    The auction for this used fully degreed C5OE Hipo harmonic balancer was ended by the seller August 21, 2019 with the following explanation "This listing was ended by the seller because there was an error in the listing".

    -Fred-


    This Ebay auction for a used fully degreed C5OE Hipo harmonic balancer that was ended by the seller because of an error in the listing by Ebay member "4tuco25" is back on Ebay again with a starting bid of $675.00:

    1965 SHELBY HIPO 289 ORIGINAL COMPETITION FULLY DEGREED BALANCER.


    Hipo 289, cobra 289, 1965 r model Shelby, r model gt350 mustang, vintage competition shelby, gt40 1965, gt40 1966, hipo balancer, hipo 289 harmonic balancer, 1965 Shelby Mustang, 1966 Shelby Mustang, k code mustang, classic mustang, vintage competition mustang, fia 289, fia competition shelby

    https://www.ebay.com/itm/1965-SHELB…5.c100036.m2109


    -Fred-


    This used fully degreed C5OE harmonic balancer received no bids by October 28, 2019 and therefore did NOT sell.

    -Fred-


    This used fully degreed C5OE harmonic balancer is back on Ebay again with no changes:

    https://www.ebay.com/itm/1840130097…em=184013009701

    -Fred-


    This used fully degreed C5OE harmonic balancer received no bids by November 4, 2019 and therefore did NOT sell.

    -Fred-


    This used fully degreed C5OE harmonic balancer is back on Ebay again with a new lower starting bid of $625.00:

    https://www.ebay.com/itm/1840233118…em=184023311840

    -Fred-


    This used fully degreed C5OE harmonic balancer received no bids by November 11, 2019 and therefore did NOT sell.

    -Fred-


    This used fully degreed C5OE harmonic balancer is back on Ebay again with a new lower starting bid of $575.00:

    https://www.ebay.com/itm/1840367245…em=184036724575

    -Fred-


    This used fully degreed C5OE harmonic balancer received no bids by November 21, 2019 and therefore did NOT sell.

    -Fred-


    This used fully degreed C5OE harmonic balancer is back on Ebay again with no changes:

    https://www.ebay.com/itm/1840462137…em=184046213707

    -Fred-


    This used fully degreed C5OE harmonic balancer received no bids by November 26, 2019 and therefore did NOT sell.

    -Fred-


    This used fully degreed C5OE harmonic balancer is back on Ebay again with a new lower starting bid of $550.00:

    https://www.ebay.com/itm/1840560496…em=184056049625

    -Fred-


    This used fully degreed C5OE harmonic balancer received no bids by December 1, 2019 and therefore did NOT sell.

    -Fred-


    This used fully degreed C5OE harmonic balancer is back on Ebay again with no changes:

    https://www.ebay.com/itm/1840657825…em=184065782560

    -Fred-


    This used fully degreed C5OE harmonic balancer received no bids by December 6, 2019 and therefore did NOT sell.

    -Fred-


    This used fully degreed C5OE harmonic balancer is back on Ebay again with a new lower starting bid of $465.00:

    https://www.ebay.com/itm/1840762067…em=184076206745

    -Fred-


    This used fully degreed C5OE harmonic balancer received no bids by December 14, 2019 and therefore did NOT sell.

    -Fred-

  • Used FoMoCo Weber Intake Manifold

    Quote from Dan Case

    The most unusual one of these that I have seen is the Cougar one that a friend of mine bought many years ago. I have seen these Weber manifolds indexed both directions for the carburetors which changes the accelerator linkage setup. I knew a guy in the San Francisco area who had a cross ram? Weber manifold on the Honey West Cobra back in the 70's.

    -Fred-

  • Used FoMoCo Weber Intake Manifold

    Here is an Ebay auction for a used FoMoCo Weber intake manifold by Ebay member "gs7shelby" with a starting bid of $2,500.00:

    [size=4]This is a 289-302 Ford Weber Intake manifold produced by the Buddy Bar Casting Co. for FoMoCo, part number C6AE 9425-A. It is in excellent condition and has never been repaired, which means no heli-coils, no re-welding, no corrosion, no cracks. The intake has "Buddy Bar Casting" on the bottom and "FoMoCo", "C6AE 9425-A", "SK36852" cast into the top of the manifold. This is a very clean original intake manifold! This particular intake is not reproduced.[/size]

    Please check out my other auctions. Please ask any questions before bidding. The intake will be insured when shipped. You can call or text me at 6026940168 George. Thank you!


    https://www.ebay.com/itm/WEBER-Inta…7UAAOSwxphbFJgu

    -Fred-

  • NOS C5ZZ 5277 A Exhaust Hanger Bracket

    Here is an Ebay auction for an NOS C5ZZ 5277 A exhaust hanger bracket by Ebay member "cobranda" with a starting bid of $80.00:

    1965 - 1966 NOS MUSTANG GT
    FITS ALL BODIES) V8

    1966 NOS SHELBY GT350 & GT350H
    V8 DUAL EXHAUST LEFT REAR HANGER BRACKET
    1-PIECE / 1-SIDE
    NOS FORD PART#:
    C5ZZ-5277-A
    A BRAND NEW NOS FORD BRACKET: 65-66 MUSTANG GT & 66 SHELBY GT350/GT350H V8 DUAL EXHAUST LEFT REAR HANGER BRACKET, w/. a NOS FORD WHITE & BLACK PRINTED PART# STICKER
    SOLD AS 1-PIECE / 1-SIDE LEFT - DRIVER's SIDE
    MADE of STEEL NATURAL FINISH- - - - -
    TECH INFO: APPLICATIONS:
    289 4v V8 / 289 HIPO V8- - - - -
    65-66 MUSTANG GT 66 SHELBY GT350/GT350H

    https://www.ebay.com/itm/1965-66-NO…HsIAAOSwnrpdgNl-


    -Fred-

  • NOS C3OZ 6513 A Valve Springs

    Here is an Ebay auction for 8 NOS C3OZ 6513 A valve springs by Ebay member "stilwellsobsolete" with a Buy-It-Now of $219.00:

    [size=4]Up for auction is a NOS set of 8 valve springs for a 1963-1967 Ford with a 289 HiPo motor (including Shelby)[/size][size=4]. They are brand new original Ford and in very nice condition. Part number [/size][size=4]C3OZ-6513-A.[/size][size=4] "Free Shipping" is to the continental US only but we can ship anywhere for an additional cost. Feel free to email me with any questions or if you need to get in touch with Greg you’ll have to be resourceful. stilwellsobsolete Evansville, Indiana. Thanks for looking.[/size]

    [size=2]https://www.ebay.com/itm/NOS-OEM-Fo…awAAOSwJE1d3Y7Z[/size]

    -Fred-

  • NOS C9ZZ 6200 B Boss 302 Rod

    Here is an Ebay auction for an NOS set of C9ZZ 6200 B Boss 302/Hipo 289 connecting rods by Ebay member "buzz75" with a starting bid of $2,000.00:

    What I have here is a set of 8 69-70 Ford Mustang BOSS 302 New Old Stock Connecting Rods in Original boxes. I bought these over 35 years ago and they have been in my collection since then. Look at the pictures and if you have any questions please feel free to contact me. I'm sure these are a pretty rare set as I have never seen another set like this ever. They don't have any numbers stamped on them. These were also Ford dealer replacement for the 63-67 289 Hipo motor. No 0 bidders!! Shipped with USPS Parcel Select Ground to USA only. I will also put insurance on the shipping box for the auction total. Thanks for looking!!

    https://www.ebay.com/itm/69-70-Ford…HUAAOSwpCpd7aGl

    -Fred-

  • NOS C2AZ 7534 A Clutch Assist Return Spring

    Here is an Ebay auction for an NOS C2AZ 7534 A clutch pedal assist return spring by Ebay member "fairlanewagon" with a Buy-It-Now of $95.00 or make offer:

    NOS
    Genuine Ford
    C2AZ-7534-A
    brand new
    never used.
    I bought this for my 1966 Ford Mustang and never got to install it and sold the car.
    Please see the pictures
    Please ask any questions that you may have
    Shipping is to the lower 48 states only
    FREE SHIPPING
    Thanks for looking


    https://www.ebay.com/itm/2332137428…e=STRK:MEWAX:IT

    -Fred-

  • Hipo 4 Speed Flywheel

    Quote from C6ZZKGT


    Here is an Ebay auction for a used Hipo 4 speed flywheel by Ebay member "automotiveapparel" with a Buy-It-Now of $399.95:

    65 66 FORD MUSTANG SHELBY GT350 ORIG 289 HIPO K CODE 4 SPEED FLYWHEEL

    This listing is for a used OEM Ford 63-66 Ford Mustang 4 speed manual transmission flywheel for 289 engine and 10.5 inch clutch. 160 tooth ring gear with normal wear. Casting number is FOMOCO C3OE-6380-B and dated 5K11. Removed from a 1966 Ford Mustang 4 speed A code. Flywheel was media blasted and re-surfaced by a local machine shop. Check out our other auctions for more cool vintage style items.

    https://www.ebay.com/itm/65-66-FORD…c4AAOSwvzFd8IQE

    -Fred-

    Do your due diligence on this flywheel. I do not see the ground area on the counterweight where there should be a Brinnel test mark. Therefore I am in doubt as to this being a true Hipo flywheel. The seller even states in their description that this flywheel came out of an A code Mustang. I posted this as more of a warning to our members here that this is NOT what the seller states in their initial title on Ebay.

    -Fred-

  • Hipo 4 Speed Flywheel

    Here is an Ebay auction for a used Hipo 4 speed flywheel by Ebay member "automotiveapparel" with a Buy-It-Now of $399.95:

    65 66 FORD MUSTANG SHELBY GT350 ORIG 289 HIPO K CODE 4 SPEED FLYWHEEL
    This listing is for a used OEM Ford 63-66 Ford Mustang 4 speed manual transmission flywheel for 289 engine and 10.5 inch clutch. 160 tooth ring gear with normal wear. Casting number is FOMOCO C3OE-6380-B and dated 5K11. Removed from a 1966 Ford Mustang 4 speed A code. Flywheel was media blasted and re-surfaced by a local machine shop. Check out our other auctions for more cool vintage style items.

    https://www.ebay.com/itm/65-66-FORD…c4AAOSwvzFd8IQE

    -Fred-

  • Used C7ZE Heads

    Here is an Ebay auction for a pair of used C7ZE heads by Ebay member "claystroup" with a starting bid of $99.00 on a reserve auction with a Buy-It-Now of $1,799.00:

    For auction are a pair of C7ZE Ford 289 HiPo K code heads. The head with the #21 casting code has a date code of 7E11 and has no defects that I can find. The head with the #20 casting code has a date code of 7B3 and has 2 minor issues that are both shown in the pictures: defect 1 is a valve cover bolt that is broken off in the head and needs to be drilled and removed; defect #2 is the top of one valve guide is broken off. The machine shop where I recently had the heads boiled and shot blasted at said that the broken valve guide was easily fixed by any competent machine shop. The heads have never been ported or cut and valves are still stock size. These are a hard to find head in an unmodified condition so bid accordingly.

    https://www.ebay.com/itm/Ford-289-h…hwAAOSw1add8XkS

    -Fred-

  • Used FoMoCo Hipo Distributor

    Here is an Ebay auction for a used early FoMoCo Hipo distributor by Ebay member "olddudescarparts" with a Buy-It-Now of $1,350.00:

    This listing is for a 289 HIPO distributor Fits all Ford and Mercury with 260 289 302 engines Thanks for looking see our return policy for returns Check our ebay store for more great deals on NOS items and good used Ford parts PLEASE READ BEFORE BIDDING... NOS,or NEW OLD STOCK does not mean the part is mint or even perfect! We do not own or sell anything that is perfect. Ford Motor Company has always been in the business of building mass produced vehicles and parts, NOT show cars When we describe something as being NOS that means it is new and has never been installed on a car.Any obvious flaws are mentioned and most times even pictured in the description so there should be no surprises,CHECK OUR FEEDBACK.We try our best to accurately describe the parts we sell but we can and do make mistakes just like everyone else .IF YOU HAVE ANY DOUBTS about the condition or application of the item being sold then please ask questions before bidding. Thank you for reading this and for your understanding.

    https://www.ebay.com/itm/1964-1-2-1…ZkAAOSw6Mldctrf

    -Fred-

  • Used COBRA Dual Quad Intake Manifold

    Here is an Ebay auction for a used COBRA dual quad intake manifold by Ebay member "crowboy1022" with a starting bid of $499.00:

    [size=4] This is a very nice example of a genuine Ford 289-302 high performance intake manifold, which were sold through Ford's service parts division in the late '60s and early '70s. "COBRA" is prominently cast into the top front of the unit. It has been shelved for 40+ years but presents very well. Inspection reveals NO stripped threads or functional or appearance issues. There is some minor pitting around the rear coolant ports but it will not affect functionality (see pics).[/size]

    [size=4] A great upgrade for your 289-302 powered Mustang, Shelby, Cobra, or other fine Ford product.[/size]

    [size=4] Check my other (2) listings for some more OE 289-302-351W HiPo components from back in the day.[/size]

    [size=4] Item is sold in as-is condition with no warranty. If you would like to insure your shipment notify me before paying for your purchase and I will provide an updated invoice reflecting insurance cost.[/size]

    [size=4] INTERNATIONAL BUYERS PLEASE NOTE: While I am happy to accept your bid/purchase please know that I will only ship to a U.S. address. International freight forwarders are located on both U.S. coasts and they can save you money. Simply provide me with the shipping address of the forwarder of your choice and your item will ship to that address.[/size]

    [size=2]https://www.ebay.com/itm/OE-Ford-28…bUAAOSw1Rpd7tyO[/size]

    -Fred-

  • NOS C7ZE Exhaust Manifolds

    Here is an Ebay auction for a pair of NOS C7ZE Hipo exhaust manifolds by Ebay member "crowboy1022" with a starting bid of $599.00:

    [size=5]On the shelf for 45+ years: a NEW OE pair of 289-302 HiPo exhaust manifolds. They are original equipment for the 1967 Shelby GT350 but were also available through Ford's performance parts division. The casting dates are located on the inboard (engine) side of each unit and they are 4-7-71 and 4-8-71. Casting numbers are C7ZE-9431-A (left) and C7ZE-9430-A (right) and are located on the outboard side of each.[/size]
    [size=4] The boxes did not age well and surface "shelf rust" is present. I could have had them blasted for cosmetic prep, but I decided that the original texture of the castings might be preferred by the buyer. I did lightly dress the mounting flanges with a file to confirm that it is light surface rust ONLY, and their prep needs are minimal.[/size]

    [size=4] Yes, there are offshore reproduction manifolds out there, but they are not of the later C7 design nor do they carry the C7 casting numbers. These are the real OE deal, unused with NO ISSUES.
    [/size]

    [size=4] A great upgrade for your 289-302 powered Mustang, Shelby, Cobra, or other fine Ford product.[/size]

    [size=4] Check my other (2) listings for some more OE 289-302 hipo components from back in the day.[/size]

    [size=4] Item is sold in as-is condition with no warranty. They will be well packaged, but if you would like to insure your shipment notify me before paying for your purchase and I will provide an updated invoice reflecting insurance cost.[/size]

    [size=4] INTERNATIONAL BUYERS PLEASE NOTE: While I am happy to accept your bid/purchase please know that I will only ship to a U.S. address. International freight forwarders are located on both U.S. coasts and they can save you money. Simply provide me with the shipping address of the forwarder of your choice and your item will ship to that address.[/size]

    [size=2]https://www.ebay.com/itm/NEW-OE-For…m4383.l4275.c10[/size]

    -Fred-

  • Used Hipo Chrome Valve Covers

    Here is an Ebay auction for a pair of used early Hipo chrome valve covers by Ebay seller "fordcobrajet428" with a starting bid of $250.00:

    This pair of used early Hipo chrome valve covers are back on Ebay again with no changes:

    https://www.ebay.com/itm/1741236469…em=174123646941

    -Fred-