Posts by C6ZZKGT

    This pair of NOS C5ZZ 6038 A Hipo motor mount insulators was ended by the seller January 13, 2020 with the following explanation "This listing was ended by the seller because the item is no longer available".

    -Fred-


    Here is an Ebay auction for a used C8ZE replacement Hipo harmonic balancer by Ebay member "darre_levi" with a Buy-It-Now of $199.00:

    HIPO 289 Harmonic Balancer C8ZE-A Mustang FORD FoMoCo Dampner 0-30 timing. Condition is Used. Shipped with USPS Priority Mail.

    https://www.ebay.com/itm/HIPO-289-H…OoAAOSwmeNeCtGZ

    -Fred-


    This Ebay auction for a used C8ZE replacement Hipo harmonic balancer was ended by the seller January 8, 2020 with the following explanation "This listing was ended by the seller because the item is no longer available".

    -Fred-


    This used C8ZE replacement Hipo harmonic balancer that was no longer available" is back on Ebay again with a much lower Buy-It-Now of $149.00:

    https://www.ebay.com/itm/HIPO-289-H…W0AAOSw~WpeFfWy

    -Fred-


    This used C8ZE replacement Hipo harmonic balancer sold January 13, 2020 on Ebay for $149.00.

    -Fred-



    This pair of NOS C5ZZ 16228 B Hipo fender emblems are back on Ebay again with no changes:

    https://www.ebay.com/itm/3334790215…em=333479021587

    -Fred-

    Here is an Ebay auction for a pair of used 65 early 66 engine frame mount brackets by Ebay member "magmustangs" with a starting bid of $599.00:

    1964.5-Early1966 Ford Mustang, Fastback, Coupe, Convertible, GT, Shelby GT350. 289 HIPO Motor Mount Frame Brackets. LH and RH Sides. These are ORIGINAL FORD PARTS. Casting Numbers C4ZA-6C041-B and C4ZA-6A030-B. Removed from a 1965 Mustang GT Fastback With 289 HIPO. The Brackets are in Excellent Original Condition.. Very Clean and look Great. No real Rust or pitting.. No Cracks or Splits. Overall, these are Excellent Original 289 HIPO Motor Mount Brackets.. Impossible To Find Original. Please email with any questions..

    https://www.ebay.com/itm/1964-…047665:g:7J4AAOSwPk1dvKzH

    -Fred-

    This pair of used 65 early 66 engine frame mount brackets are back on Ebay again with no changes:

    https://www.ebay.com/itm/1537950719…em=153795071968

    -Fred-

    Quote from C6ZZKGT


    Here is an Ebay auction for a pair of used 65 early 66 engine frame mount brackets by Ebay member "magmustangs" with a starting bid of $599.00:

    1964.5-Early1966 Ford Mustang, Fastback, Coupe, Convertible, GT, Shelby GT350. 289 HIPO Motor Mount Frame Brackets. LH and RH Sides. These are ORIGINAL FORD PARTS. Casting Numbers C4ZA-6C041-B and C4ZA-6A030-B. Removed from a 1965 Mustang GT Fastback With 289 HIPO. The Brackets are in Excellent Original Condition.. Very Clean and look Great. No real Rust or pitting.. No Cracks or Splits. Overall, these are Excellent Original 289 HIPO Motor Mount Brackets.. Impossible To Find Original. Please email with any questions..

    https://www.ebay.com/itm/1964-1-2-1…J4AAOSwPk1dvKzH

    -Fred-


    This pair of used 65 early 66 engine frame mount brackets are back on Ebay again with no changes:

    https://www.ebay.com/itm/1537552182…em=153755218278

    -Fred-


    This pair of used 65 early 66 engine frame mount brackets received no bids by December 15, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used 65 early 66 engine frame mount brackets are back on Ebay again with no changes:

    https://www.ebay.com/itm/1537636412…em=153763641254

    -Fred-


    This pair of used 65 early 66 engine frame mount brackets received no bids by December 22, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used 65 early 66 engine frame mount brackets are back on Ebay again with no changes:

    https://www.ebay.com/itm/1537723673…em=153772367376

    -Fred-


    This pair of used 65 early 66 engine frame mount brackets received no bids by December 30, 2019 and therefore did NOT sell.

    -Fred-


    This pair of used 65 early 66 engine frame mount brackets are back on Ebay again with no changes:

    https://www.ebay.com/itm/1537805366…em=153780536638

    -Fred-


    This pair of used 65 early 66 engine frame mount brackets received no bids by January 6, 2020 and therefore did NOT sell.

    -Fred-


    This pair of used 65 early 66 engine frame mount brackets are back on Ebay again with no changes:

    https://www.ebay.com/itm/1537874659…em=153787465945

    -Fred-


    This pair of used 65 early 66 engine frame mount brackets received no bids by January 13, 2020 and therefore did NOT sell.

    -Fred-

    This pair of NOS C5ZZ 16228 B Hipo fender emblems received no bids by January 6, 2020 and therefore did NOT sell.

    -Fred-


    This pair of NOS C5ZZ 16228 B Hipo fender emblems are back on Ebay again with no changes:

    https://www.ebay.com/itm/2334575073…em=233457507349

    -Fred-


    This pair of NOS C5ZZ 16228 B Hipo fender emblems received no bids by January 13, 2020 and therefore did NOT sell.

    -Fred-

    Here is an Ebay auction for a pair of 2 well used (worn out) screw in rocker arm studs by Ebay member "bambie930" with a starting bid of $5.99:

    Original pair of 289 HIPO Screw In Rocker Arm Studs. They do have some damage to them where the rocker arm damaged the stem and cut into them. Look at picture #2 to see the damage. Do not know if they are repairable or someone can use, been sitting in my basement for over 30 years. Sold AS IS.

    https://www.ebay.com/itm/1741539748…e=STRK:MEWAX:IT

    -Fred-

    I have a question here, shouldn't this radiator have a tag on it that is stamped C4ZE and either Y2 or G2?

    -Fred-

    Here is an Ebay auction for a used San Jose Hipo radiator by Ebay member "mustangmasters428" with a starting bid of $1,295.00:

    Here we have a true Ford original radiator for a 66 K A or C code Shelby or Mustang equipped with a 289 small block V8 motor. This was a factory part stored for many years needs to complete a nicer car such as K code 289 Hipo or GT 350. This used radiator, stamped with W MO dated 2 66 and is correct for a West Coast car such as a Shelby.


    This is a standard shift radiator as the lower tank has no cooling line adapters so it is great for a 4 speed car. Our inspection shows this as a good used piece which is not damaged and hold fluids fine. Please keep in mind it is an unrestored piece & does show its 50 plus years age. We chose to bring it to you as is with out any detail or repairs. A totally stock non abused or modified piece with nice tanks straight slats as you can see in the pictures. This is a factory original part which will be great to complete your restoration or replace your missing Ford unit after all when is the last time you have seen one to meet your needs. Don't miss out its all we have !
    This rare piece is surely older and would require attention to meet a concourse owners need although driven class could enjoy it as it is. Keep in mind that because of its age we cannot offer a warranty it as is !


    https://www.ebay.com/itm/1966-Shelb…uAAAOSwH9JeG-Bz

    -Fred-

    Here is an Ebay auction for a restored FoMoCo Hipo distributor by Ebay member "mysunshine302" with a starting bid of $750.00:

    I am selling off some of my Ford parts, that I have been collecting for over the last 45+ years. Time to pass on hard to find Ford obsolete parts too the up coming younger generations to use.
    You are bidding on a professionally *totally restored *Original 289 HiPo FoMoCo housing (K) code dual point distributor. ***This is not a used service replacement Motorcraft or Autolite replacement housing HiPo dual point distributor. This is a 100% original FoMoCo housing HiPo dual point distributor. Distributor curb has been set up to original 1966 factory 289 HiPo spec. Ready to install and Rev!
    Part number on original aluminum FoMoCo housing C50F-12127-E date code 8B27. Part number cast on lower aluminum housing C5OF-12131-B. Correct for the 289 HiPo (K) code engine in the Shelby GT350 & AC Cobra & Ford Mustang GT & Ford Fairlane GT & Ford Falcon Sprint & Mercury Comet & Mercury Cougar XR7 & Mercury Cyclone & Spoiler. This is a great find of a original 289 HiPo *FoMoCo housing dual point distributor. Would work great if your building a concours show car or you lost your 289 HiPo distributor or building a HiPo car or HiPo engine to sell.
    Comes complete as in all the pictures with ***All NOS Motorcraft points & NOS condenser & NOS dual point breaker plate & NOS primary wire installed & NOS screw & hardware. New shaft bushing.
    ***Also including NOS Motorcraft cap & NOS Motorcraft rotor.
    Still has nice looking original patina aluminum & machine finish.**NOT Spray Painted**
    Look's NOS. **Ready to install & run!


    https://www.ebay.com/itm/362879837811?ul_noapp=true

    -Fred-


    Thought that this was the nicest K at the auction. Strong price for a coupe.

    The Henry Ford II K convertible with the custom dash and leather interior was also an interesting car.

    I agree with your comments on the Koupe.

    I added the Henry Ford II convertible now so that it will be easier for anyone to find it that did not follow the auction.

    -Fred-

    This Kar was bid to $175,000 on January 10, 2020 but did not meet the sellers reserve and therefore did NOT sell.

    -Fred-

    This is a Henry Ford II Hipo convertible that was at Mecum Kissimmee 2020. I am unable to make out the VIN on this one so here it is without a VIN:


    • Specially produced for Henry Ford II confirmed by certificate from Ford France dated January 3, 1991
    • Special finish, paint and leather upholstery
    • Purportedly served as the course-opening car for the 24 Hours of Le Mans in 1966 and driven by Henry Ford II, honorary president of the race
    • Matching numbers K-code HiPo 289/271 HP V-8 engine
    • 4-speed manual transmission
    • 3.89 differential
    • Power steering and brakes
    • Raven Black with Tan leather upholstery
    • White leather soft top
    • Unique door panels
    • Styled steel wheels
    • Bucket seats from the future 1967 Mercury Cougar
    • Center console

    Here is an opportunity to acquire a one-of-a-kind 1966 Mustang GT Convertible with historic ties to both Henry Ford II and Le Mans. As confirmed by a certificate from Ford France dated January 3, 1991, this K-code GT convertible was specially produced for Henry Ford II’s visit to France for the 1966 24 Hours of Le Mans. Reportedly, Henry Ford II drove the Mustang during the course-opening activities as part of his duties as honorary race chairman. In addition to its 289 High Performance engine, 4-speed transmission and 3.89:1 rear gearing, the GT was enhanced by Ford’s styling department with a special Raven Black paint finish, white leather top and a leather interior, which was not available for regular-production Mustangs. Beyond the special leather upholstery, the interior also came with unique door panels with pull straps, 1967 Cougar bucket seats, a leather-wrapped shifter knob, dual gauge pod above the instrument panel for temperature gauge and tachometer, and a custom console with clock and storage trays. The “HFII” logo is found on the steering wheel horn ring, seat belt buckles, exterior door badges and keys. Equipped with its matching-numbers 289/271 HP High Performance engine, the convertible is also nicely optioned with the GT Equipment Group, AM/8-track stereo tape player, power steering, power brakes, power convertible top and styled steel wheels. As a GT model, the convertible is equipped with grille-mounted fog lights, trumpet dual exhaust tips, rocker panel stripes, front disc brakes and a quicker steering ratio. Based on the standard 289 small-block V-8, the K-code 289 HiPo engine generates a high-revving 271 HP thanks to a solid-lifter camshaft, special cylinder heads with heavy-duty valve springs, a 4-barrel carburetor and high-flow exhaust manifolds. The Henry Ford II 1966 Mustang GT convertible spent most of its life in France, where it was often displayed at Mustang Club de France events.


    https://www.mecum.com/lots/FL0120-39…de-convertible/

    -Fred-

    Here is an Ebay auction for a used C3OZ 8592 A thermostat housing by Ebay member "magmustangs" with a Buy-It-Now of $89.00:

    1963 Shelby Cobra, Ford Falcon Sprint, Fairlane, 500, Mercury Comet S-22... 260 / 289 HIPO Thermostat Housing-Water Neck. 'ALUMINUM'. Might possibly be correct for Early 1964 model year also, I'm not sure.. This is an ORIGINAL FORD PART. Casting Number (FoMoCo) C3OE-8594-A. Dated (6...63).. The Housing is in Great Original Condition.. NO Cracks or Damage. There is some Pitting on the Metal, This Will Still Mount and Seal Well. . Good Mounting Surface. No major Corrosion . . Overall, this is a Great Original 260-289 Thermostat Housing.. Impossible To Find Original. ..

    https://www.ebay.com/itm/1963-Ford-…RoAAOSw8Z9a3652

    -Fred-

    Here is an Ebay auction for a used C3OZ 8592 A thermostat housing by Ebay member "magmustangs" with a Buy-It-Now of $89.00:

    1964-1965 Ford Mustang, Fastback, Coupe, Convertible, GT, Shelby GT-350, Falcon, Sprint, Fairlane, Ranchero, Mercury Cougar, XR7, Comet, S-22, Caliente, Cyclone. . . .... 260 / 289 2V-4V-HIPO Thermostat Housing-Water Neck. 'ALUMINUM'. This is an ORIGINAL FORD PART. Casting Number (FoMoCo) C4OE-8594-A. Dated (12...63).. The Housing is in Good Original Condition.. NO Cracks or Damage. There is some Pitting on the Metal, This Will Still Mount and Seal Well. . Good Mounting Surface. No Heavy Corrosion . . Overall, this is a Good Original 260-289 Thermostat Housing.. Impossible To Find Original. ..

    https://www.ebay.com/itm/1964-1965-…0EAAOSw5FJa4PBx

    -Fred-