Posts by C6ZZKGT

  • C4OE Hipo Flex Plate

    This used C4OE Hipo flex plate received no bids by March 1, 2020 and therefore did NOT sell.

    -Fred-

  • NOS C5ZZ 6540544 C GT Rear Valance

    This Ebay auction for an NOS C5ZZ 6540544 C GT rear valance is back on Ebay again with no changes:

    https://www.ebay.com/itm/NOS-1965-C…z0AAOSw1ABdtlc4

    -Fred-

  • Used C5OE Harmonic Balancer

    This used C5OE Hipo harmonic balancer sold March 1, 2020 on Ebay for $406.00 with 23 bids from 13 bidders.

    -Fred-

  • Used C5OE Harmonic Balancer

    This one has a J4 (September 1964) date code.

    -Fred-

  • Used C5OE Harmonic Balancer

    Here is an Ebay auction for a used C5OE Hipo harmonic balancer by Ebay member "ollyroge" with a starting bid of $0.99:

    Original Ford 289 Hi-Po harmonic balancer Shelby GT350 Cobra. Here IS an original 289 Hi-Po balancer that is in nice shape. This is the variation with the C5OE Ford part number. This was removed from an original 65 Shelby GT350 but would be correct for any 289 Hi-Po engine including Shelby Mustangs. It is in very nice shape with the seal surface showing hardly any wear . Nice clear timing marks and rubber that is not completely dried out . No extra holes drilled for strange balancing . The repro balancers are available but do not carry a Ford logo or part number on them

    Here is your chance to get an original balancer that has not been all beaten up. This balancer would be correct for all 65-67 Shelby GT350’s and any other 289 Hi-Po powered vehicle including 289 Cobras. Another one this nice will not come along for some time if you need this for your K code car don’t pass it up! Winner pays actual shipping charges. Good luck bidding !


    https://www.ebay.com/itm/Original-C…=p2047675.l2557

    -Fred-

  • Head Gaskets

    Quote from Kman

    I will be replacing the head gaskets on my original and unmodified motor this spring. Had one fail externally (nothing in the oil) Any recommendations on a book gasket to use an/or anytime doing the job? I have done them before but never on a K motor. Thanks!

    Jack

    I have had good luck with both FelPro and Victor gaskets. Of course Ford gaskets are also good but tough to find and generally more expensive these days. The K engine is not any more difficult to work with than most other American 8 cylinder engines. The only main difference being mechanical compared to hydraulic lifters.

    -Fred-

  • New/Old Msmber

    Quote from Kman

    Hello! I was a member here years ago and am very happy to see what site up and running again. I still have my 65 K Coupe which I have owned since 1996. I recognize some the members from years ago, glad to see the K brigades is still alive and well! Looking forward to posting and learning!

    Welcome back and I am happy to hear that you still own your 65 Koupe.

    -Fred-

  • NOS C2OZ 6565 B Engine Push Rods

    Quote from C6ZZKGT

    Here is an Ebay auction for a set of 16 NOS C2OZ 6565 B engine push rods by Ebay member "289special" with a Buy-It-Now of $250.00 or make offer:

    Sixteen NOS Ford Push rods. Part number C2OZ-6565-B For 260, 289 and 289 HiPo. Do your homework. Know your part. Ask questions before buying. Buyer pays $15.00 shipping and handling 48 United States only.

    https://www.ebay.com/itm/NOS-FORD-M…~AAAOSw7speSZZi

    -Fred-

    The price on these NOS push rods has been reduced March 1, 2020 by $50.00 to $200.00.

    -Fred-

  • Used C8ZE Replacement Harmonic Balancer

    Quote from C6ZZKGT

    Here is an Ebay auction for a used C8ZE replacement Hipo harmonic balancer by Ebay member "junkrat1" with a starting bid of $.99:

    1965-1968 OEM FORD 289-302-351W HP (THICK) Balancer.. Condition is Used. I believe this is a replacement balancer for the SB Ford Hi-Po engines (you must verify this yourself - see pictures for exacting details). It appears to be in good condition - the rubber bonding is good as is the oil seal shaft. Note it has timing marks inscribed on the outside surface for accurate timing settings.


    This was removed from an engine years ago, been collecting dust since, and is time to sell; unfortunately I know very little about this part other than what is noted....it does have a good appearance and is freshly painted.

    https://www.ebay.com/itm/1965-1968-…&orig_cvip=true

    -Fred-

    This used C8ZE replacement Hipo harmonic balancer sold March 1, 2020 on Ebay for $50.99 with 6 bids from 4 bidders.

    -Fred-

  • Used C8ZE Replacement Harmonic Balancer

    Here is an Ebay auction for a used C8ZE replacement Hipo harmonic balancer by Ebay member "junkrat1" with a starting bid of $.99:

    1965-1968 OEM FORD 289-302-351W HP (THICK) Balancer.. Condition is Used. I believe this is a replacement balancer for the SB Ford Hi-Po engines (you must verify this yourself - see pictures for exacting details). It appears to be in good condition - the rubber bonding is good as is the oil seal shaft. Note it has timing marks inscribed on the outside surface for accurate timing settings.


    This was removed from an engine years ago, been collecting dust since, and is time to sell; unfortunately I know very little about this part other than what is noted....it does have a good appearance and is freshly painted.

    https://www.ebay.com/itm/1965-1968-…&orig_cvip=true

    -Fred-

  • WTF?

    This old Hipo Mustang title listing was ended by the seller February 27, 2020 with the following explanation "This listing was ended by the seller because there was an error in the listing".

    -Fred-

  • WTF?

    I am surprised that Ebays policy has changed on these paperwork things as they did not allow it previously.

    -Fred-

  • WTF?

    This old Hipo Mustang title sold February 27, 2020 on Ebay for $700.00.

    -Fred-

  • WTF?

    I am surprised that Ebays policy has changed on these paperwork things as they did not allow it previously.

    -Fred-

  • Used Autolite Hipo Dual Point Distributor

    Here is an Ebay auction for a used Autolite Hipo distributor by Ebay member "mustangs-n-musclecars " with a Buy-It-Now of $750.00:

    Up for auction is a very rare 289 hi po dual point distributor. This was the shop tips version they suggested replacing your stock Boss 302 distributor with. This unit would be a great candidate for such an application with it's Date code - 0F30 = June 30, 1970. Very nice shape - see all pictures. Winning bidder is responsible for shipping costs. Thank you for looking at our auction!

    https://www.ebay.com/itm/289-HiPo-F…eoAAOSwEPReWwjQ

    -Fred-

  • NOS D1AZ 12A132 A dual point conversion kit

    This NOS D1AZ 12A132 A dual point conversion kit is back on Ebay again with no changes:

    https://www.ebay.com/itm/3629308576…=STRK:MEWAX:VRI

    -Fred-

  • Used 65 Early 66 Engine Frame Bracket

    Here is an Ebay auction for a pair of used 65 early 66 engine frame mount brackets by Ebay member "jarsncars" with a Buy-It-Now of $355.00:

    The Ford casting numbers are hard to read, but i believe that they are just readable. I have had these a long time figuring I would do another HiPo car, but can't find one that's presentable. The white ink indicates Left or Right side.

    https://www.ebay.com/itm/HiPo-1965-…QYAAOSwTYFeWAv1

    -Fred-