Who did the port work and can you e-mail pics to me as they might work depending on price?
Posts by lscman_old
-
-
Am looking for some C3OE Hipo heads with date code of 3C or 3D so if anybody has a set of original untouched heads let me know...Thanks
Edited by - lscman on 07/29/2011 05:48:22
Edited by - SixT5HiPo on 08/02/2011 22:10:03
-
PM me as I can probably help.
-
Probe makes a good piston that's reasonable to buy as you only want the two valve relief piston anyway and while your at it get the coated skirts as you'll be glad you did.
-
Mark,do you think the underhood color is the same color as the floor as I've seen alot of what I think is different colors between the two and I hope others will chime in?
-
Bottom side of car is close to paint or correct primer and am wondering if anyone knew of an epoxy black with correct color as it looked like semi or gloss they could recommend?Going to get the underside done so we can start on the top side work.
-
On what year and which factory?
-
I agree that those who don't follow the rules should be called out as noone is special here but then again just my opinion but that's how you find out the true measure of a man!
-
Jim,PM me and we'll talk and dunc I've e-mailed you 3 times and heard nothing from you...Thanks
-
What's your e-mail address?
-
Anybody know of any good and reasonable plating shop that does cadium plating as wondered who Charles used while doing his car?Have bolts,nuts etc. I'ld like to get redone so help me out?
-
While we're on the subject Dunc289 do you ever look at or answer your personal e-mails?
-
Have some NOS Hipo balancer washers $40 and just found some early alternator fan spacers for the C pulley $20 and these are hard to get.
-
Sounds like a complete third member for that kind of money and all I want is a NICE 4.11 ring and pinion?PM me and if it's nice we can talk?
-
Anybody have a nice used or NOS 4.11 FoMoCo gear for sale for 9 inch?
-
OK I know how to read a tag but if no tag is present and Ford had to mark them some way so the workers knew which box went to what car on the assembly line or did they make up for it with the pitman arm?Also a color system has always been in place on Ford parts at Ford so really question didn't get answered but appreciate the imput.
-
Is the Mustang Hipo steering box different then the standard Mustang box and is there color marks on the steering rod that tells which is which?Seen some with two red lines and others with yellow and blue lines?
-
Lets start with how much is the owner of car asking?
-
The stuff you need to buy and to finish the car the $12G estimate is very light.You'll spend $20G redoing the car and that's if you can do something other then pay plus the cost of the car.Fastback is really where you want to be but sounds like something I would be interested in?
-
Was pinch weld painted all the way to the front or masked off etc.from doors back?Did they do this on all Dearborn,San Jose and Metuchen plant cars?
Edited by - lscman on 07/08/2011 21:01:25