Posts by apound_old

apound_old · 65/66 Mustang 9" rear ID? apound_old February 20, 2011 at 9:57 AM

Sorry, guess I wrote that wrong. It would be the fill plug. I' get pictures and see if I can figure out how to post them.

apound_old · 65/66 Mustang 9" rear ID? apound_old February 19, 2011 at 8:46 AM

I have a 9" rear axle assembly that I was told came from a 65 or 66 Mustang. How do I positively identify which year and if it is the correct rear for a Mustang? It has a drain plug on the rear pumpkin and the axle tubes are tapered on the ends. It was under a 65 Ranchero when I got it so it is not very wide.

Thanks

apound_old · 9" rear need positive ID apound_old February 18, 2011 at 5:30 PM

OK please excuse my ignorance as I'm not as knowledgeable as most of you but I need help to identify a rear axle I have. I was told it came from a 65 or 66 Mustang. It is a 9" for sure and has tapered axle tubes and a drain plug in the rear of the pumpkin. I would post pictures but don't know how on this forum. What do I look for to get a positive ID? I'm pretty sure, knowing the person I got it from, that it is a true 65 or 66 Mustang 9".

Thanks

Edited by - SixT5HiPo on 02/18/2011 22:51:47

apound_old · Wanted C5OE-A, A, 4H6 4V Intake apound_old June 19, 2009 at 10:00 AM

Don't think I have what you are looking for. I have 2 C5AE 9425 M intakes. I guess you are looking for a C5AE 9425 A? Anyway the dates on mine are 4K21 and 4L17.

apound_old · Wanted C5OE-A, A, 4H6 4V Intake apound_old June 18, 2009 at 3:46 PM

I may have one around that date. I'll look when I get home tonight.

<BLOCKQUOTE id=quote>quote:<hr height=1 noshade id=quote>

Seeking an 4V intake manifold dated around or on 4H6. It would be engineering number C5OE-A with A machining style.

Dan

apound_old · 289 HiPo block and Main Caps apound_old May 19, 2009 at 2:51 PM

can you e-mail me pics of the paint markings to alanpound@hotmail.com? thanks

apound_old · Down draft tube apound_old March 19, 2009 at 9:21 PM

Sorry Bob. I meant I sent a PM wanting to buy the tube not a PM to you. If I get it I will get you pictures of it. I also still need to send you the book so you can copy the photos of my car. I'll get it to you soon.<BLOCKQUOTE id=quote>quote:<hr height=1 noshade id=quote>

Never got it.

apound_old · Down draft tube apound_old March 19, 2009 at 10:14 AM

I sent you a PM about this

<BLOCKQUOTE id=quote>quote:<hr height=1 noshade id=quote>

I have a nos tube that I wont need if someone is interested. I would take $130.00 for it. It is the valve cover style. When I bought it the ford sticker was on it, but I removed the sticker and then never installed the tube.

apound_old · Fuel pump rebuilding apound_old January 4, 2009 at 3:46 PM

I am needing a pump for a 65 hipo Fairlane. Does anyone know where I can get a core and is it too late to get in on the second run of rebuilds? That is assuming I can find a core.

Thanks,

Alan

apound_old · Looking for 4G or 4H 289 6 bolt block apound_old December 8, 2008 at 7:17 PM

I looked and all I have close is a 4J24. It has standard main caps but I would assume you could use yours and have it line bored??? I haven't had it checked by a machine shop but I'm pretty sure it's a good block. Let me know.

apound_old · Looking for 4G or 4H 289 6 bolt block apound_old December 6, 2008 at 7:15 PM

I may have a block. I have several but need to check the dates. Where in Texas are you?

apound_old · Shelby American question apound_old October 31, 2008 at 8:31 AM

Thanks I posted it on there.

apound_old · Shelby American question apound_old October 30, 2008 at 9:21 PM

Has anyone heard of a 60's LA California Ford dealer Norman ford Sales? In an old National Dragster photo of my 65 K Fairlane it looks like this was painted on the quarter panel. I did a search and found a reference to them doing the paperwork for Shelby American. Does anyone know anything about this? Sorry if this is a dumb question.

apound_old · Hi- po parts needed apound_old October 22, 2008 at 6:05 PM

I am new here so if I violate some rule about posting please excuse me.

I am in need of a few parts for my 65 K Auto Fairlane and wondered if anyone had them that wanted to sell.

Carb C50F 9510 K

Hipo Fan blade and spacer.

Correct fuel pump.

Intake dated late 64

Car has a build date of Dec 30 1964

Thanks

apound_old · Trade C4 hi-po waterpump for C5?? apound_old October 22, 2008 at 5:55 PM

I am in need of a pump that would be correct for a Dec 64 built 65 Fairlane. Would you have one that is correct and how much do you want for it if you do?

Thanks,