Posts by k code 65_old

k code 65_old · Need San Jose Radiator W-MO 10 65 k code 65_old February 9, 2010 at 3:46 AM

Hi Ray , if you Get heaps of Response in regards too Radiator , please keep me in Mind as im Looking for the Same thing Dated 65 .

Much Appreciated.

Shane

k code 65_old · USED 1965 Hi-po Fuel Pump k code 65_old February 8, 2010 at 1:05 PM

Tell me about It , Out of Control

k code 65_old · Stamping Ink k code 65_old February 4, 2010 at 3:12 AM

Hi Guys , man O man thats alot of talk and Knowledge over a Alt Stamp .

I Want one of those Orange Stamps too Complete my Resto Alt.

Also whilst on Subject , what is the Type of Goldie Colour that is Used on the Alt Stator , i have always wanted too know that , havnt seen a product like that here in NZ

Keep up the Good Research , im Loving it.

Shane

k code 65_old · Stamping Ink k code 65_old February 1, 2010 at 3:10 AM

Hi Guys,i too have been wondering if the Stamp can be brought , What is the Solution please .

Thanks , shane

k code 65_old · RADIATOR NEEDED FOR 65 HiPo k code 65_old January 29, 2010 at 4:28 PM

Thanks Bo , just what do all those letters and numbers Represent , i imagine a Radiator of that vintage going too be real tough to find.

Shane

k code 65_old · RADIATOR NEEDED FOR 65 HiPo k code 65_old January 29, 2010 at 2:59 PM

Thanks Fred , date is 20th August 65,San Jose.

I would most likely be happy with any 65 Date Radiator.

Would even settle for a Good brand New Unit.

Did The HiPo Radiators still have the Auto Trans Fittings in the Bottom tank, my Thinking is that they Didnt .

Shane

k code 65_old · RADIATOR NEEDED FOR 65 HiPo k code 65_old January 29, 2010 at 4:19 AM

Hi All , i need too source a New Raditor for my 65 , can someone point me in the Right Direction of where too buy a Nice unit that Looks real Close too Original,i normally Buy my Parts from NPD .Has any one had Experience with NPDs Units.

Or better still does anyone have a Rebuilt Original.

Any help would be much appreiated.

Shane

k code 65_old · Fuel pump rebuilding k code 65_old January 10, 2010 at 1:23 AM

Thats an Awesome Picture Fred of Pump Graduation Day , You truely are the God Father of K Kodes.

Thanks for all you have done.

Shane

k code 65_old · 65 Hipo Fuel Pump k code 65_old January 8, 2010 at 4:27 PM

Fred , paid $1500 for unit , then had too resend too U.S. for Rebuilding .I was just real happy too have Finally got the last Item too complete my Engine ,Now im Real Unhappy finding out that pump Date Code has been Misrepresented.

k code 65_old · 65 Hipo Fuel Pump k code 65_old January 8, 2010 at 4:19 AM

Fred , thanks for your interest , Yes i Did Recieve a Reply From Robert,its Not Good News for me.

Reply : I'm sorry about that if that is the case but you made the choice to buy it after I gave you all the info like you described.I keep all my e-mails when dealing with people but it was rebuilt by Ford or an independant rebuilder for them so I didn't rebuild it either.I lost money by shipping and cut a deal with paper work etc. to you.Sorry don't know what I can do as I sell everything as is,where is with NO returns or warranties.His ( FRED ) opinion is just that and and he's wrong about the date but can't imagine what Ford had in mind.I was done with the deal after I shipped it...Sorry

k code 65_old · 65 Hipo Fuel Pump k code 65_old December 28, 2009 at 3:36 PM

The Casting Is CARbureTER Made In CANADA

k code 65_old · 65 Hipo Fuel Pump k code 65_old December 28, 2009 at 3:39 AM

I Bought This Pump From Robert and it Has a 5C9B date Code.How is This Date Code Properly Read ?

Is This a 1965 Date Code ?

Thanks Shane

k code 65_old · CAST IRON PAINT FROMULA k code 65_old August 24, 2009 at 1:37 PM

All the Apropiate Suspension parts that are listed as being left Natural,Gearbox,rear brake drums

Thanks

k code 65_old · CAST IRON PAINT FROMULA k code 65_old August 24, 2009 at 4:36 AM

Can anyone Help in the Way of a Paint Code Formula for Cast Iron Gray , have had a Paint Shop mix up several batches now and still doesnt look good.

Would like the Natural Look However not real apropiate on our Roads.

Shane

k code 65_old · ENGINE MOUNTS COLOURS 1965 K k code 65_old August 17, 2009 at 4:03 AM

Thanks Bob for your input , had previously had mounts sprayed semi black , will look at doing cast Iron Gray.

k code 65_old · Correct colours for 65 engine mounts k code 65_old August 17, 2009 at 3:57 AM

Thanks Guys for the Feedback , didnt think i was going too get any Answers on this , thats an Awesome looking Restored Engine Mount.

Thanks

k code 65_old · 67 restoration part 7 k code 65_old August 8, 2009 at 2:59 PM

Hi , my 65 K just been painted as well , same colour Wimbledon White , when i first viewed colour i was shocked at how Yellowish/dirty look it appears,my first comments where that cant be the correct Colour , obviously there cant be too many True Wimbledon White mustangs around , i think alot of people must Whiten it up abit as my Painter Assures me it is correct.

Im interested too hear other peoples Reactions on this.

What a buz too see Colour after 2 1/2 years in a Panel shop.

k code 65_old · ENGINE MOUNTS COLOURS 1965 K k code 65_old August 7, 2009 at 4:55 AM

i am in the Process of painting Engine , was going too spray engine mounts and cast bracket Cast Grey , looking through pics on web i see some cars have Black Mounts that bolt too engine , and the Cast Bracket from chasis too engine mount is Cast Grey.

Can someone please Verify if this is correct.

Thanks from one Addicted Kiwi K Kode Owner

Shane

CAN SOMEONE PLEASE GIVE ME SOME ADVICE ON THIS ONE.

k code 65_old · rubber floor mats k code 65_old August 3, 2009 at 1:49 PM

Im looking for a White Set Of the Rubber Mats if anyones seen any , Cant be too popular as the Whites seem too be discontinued.

Thanks Shane

k code 65_old · Correct colours for 65 engine mounts k code 65_old August 1, 2009 at 3:30 AM

i am in the Process of painting Engine , was going too spray engine mounts and cast bracket Cast Grey , looking through pics on web i see some cars have Black Mounts that bolt too engine , and the Cast Bracket from chasis too engine mount is Cast Grey.

Can someone please Verify if this is correct.

Thanks from one Addicted Kiwi K Kode Owner

Shane

CAN SOMEONE PLEASE GIVE ME SOME ADVICE ON THIS ONE.