Thank you for looking at this part but it is now SOLD.
Posts by kmrunner_old
-
-
This pulley/alternator is sold! Thank you!
-
I have one original Hipo alternator pulley for sale. Make offer. I'll probably ship the whole alternator as I don't want to mess the pulley up trying to get it off.
-
I'd like to sell this distributor also. It's in good condition. Stamped 5BA. The wire has some elctrical tape around it. Probably had the wire repaired at some point.
-
I'd like to sell this distributor. It's in good condition. Stamped 8C27. I can take a picture and send in email.
-
One of the engines I bought in 87 and it wasn't in a car at the time. The VIN stamped engine was from 5F09K679219. I bought the engine when it was in a 66 C coupe in 87. The owner told me that he had totaled the K GT fastback and had put the drivetrain in his wife's C coupe. I resto-moded the car and sold it around 90 in OKC. I installed a standard 289 with 4bbl and kept the HiPo. I wasn't well versed in HiPo tranny's back then and sold the car with the HiPo trans and rearend. SO, if anyone sees a white 66 C coupe with Gold Shelby stipes driving around Oklahoma, it has a HiPo trans and 3.89 9" rearend. I put HiPo badges on the car but never tried to pass it off as a K car. I only did it becuse they looked good and I did have a K engine in the car at the time. If you see the car, and it's like I sold it, you'll definitely recognize it if it's at a local show because I painted the engine compartment gloss white and ran the stripes down the firewall.
-
FYI, I will begin to part out a 1966 K GT Coupe starting next week, approx Sept 12th. Parts will probably be available through Ebay. I will also be parting out a HiPo engine VIN stamped 5F09K679219. That engine is currently a complete long block that was a strong running engine before being pulled from the car several years ago.
A quick list of parts that will be available:
(I will list dates,codes, detailed info, and pictures later)
- 1 VIN stamped block 5F09K679219
- 1 good 289 block correct date code but no VIN stamp
- 2 complete sets of HiPo heads (One set had new valve seats installed in 90)
- 1 4bbl cast iron intake
- 1 set of C7 Hipo Exhaust manifolds
- 2 HiPo harmonic balancers both C5OE
- 2 Motorcraft Dual-point distributors
- 1 Hipo crank
- 1 set of HiPo rods
- 1 set of thick main bearing caps
- 2 counterweights and thin chain gears
- 1 original HiPo fan (has the weight on it)
- 1 complete set of 65 motor mounts (all parts included, even bolts)
- 1 HiPo alternator pulley
- 1 HiPo H-pipe, used but excellent condition
- 2 used GT exh trumpets
- 1 export brace
- 1 Rally pack 8000rpm
- set of GT Foglights
- 1 66 K GT Coupe body minus any HiPo parts except fast ratio steering box
- 1 72 TopLoader wide ratio
- 1 68 302 engine, internal condition unknown at the moment