Posts by gamera11_old

gamera11_old · ENGINE MOUNTS COLOURS 1965 K gamera11_old August 15, 2009 at 10:10 PM

I have seen the steel bracket that bolts to the block ether semigloss black or bare Metal. The chassis mounts are cast iron gray. The bottom steel metal bracket I have always seen black. That is probably due to the fact that it is a welded together brket and most brackets that have welds are dip painted. I hope this helps. Bob

gamera11_old · Correct colours for 65 engine mounts gamera11_old August 15, 2009 at 9:55 PM

I have seen the hipo motor mount block brackets bare metal as well as painted a semigloss black.Bob

gamera11_old · Hipo rear axle bumper plate gamera11_old September 28, 2006 at 4:23 AM

All 9 inch equip mustangs from late 65 to 70 used the exact same plate with the 3 holes and there were alot of 9 inch equiped mustangs made from 67 to 70. Bob G.

gamera11_old

U bolts were natural with a cosmoline or wax coating.Bpb G.

gamera11_old · KONI REAR SHOCKS gamera11_old September 28, 2006 at 3:52 AM

Thought you should know that although Konis were used on some 66 GT350's no 67 or later Shelby came from the factory with Konis. The later vin #66 Shelby's and up used a gabrial made adjustable shock.Good luck with your search. Bob Gaines SAAC Shelby concoars judge.