Posts by 67kcodeGT_old

67kcodeGT_old · disc brake dust shield 67kcodeGT_old January 26, 2010 at 5:11 AM

I might have a extra one,for what year car do you need this for?

Greg

67kcodeGT_old · 9" detriot locker 67kcodeGT_old January 14, 2010 at 4:39 AM

If still needed,I think I think I still have one.Do you need 28 or 31 spline?

Greg

67kcodeGT_old · 289 HiPo Fan Spacers 67kcodeGT_old January 7, 2010 at 4:12 AM

How about the 9" rear snubber plate and the dual exhaust reinforcment plate under the back seat,hard to come by also.

67kcodeGT_old · Restoration part 8 67kcodeGT_old December 7, 2009 at 6:29 AM

Looks like it is coming along good,makes me want to get started on my 67 as soon as possible,got to this convertible done first!

67kcodeGT_old · vintage mustang forum? 67kcodeGT_old October 21, 2009 at 4:31 AM

Same here,sight works like it always has.Have it in my favorites and connects every time.

67kcodeGT_old · 9 inch rebound plate 67kcodeGT_old September 21, 2009 at 8:52 PM

Thanks for the great pictures Jeff.We are looking into making the reinforcment plates at this time.Need to get a set so we can be as exact as we can in doing them.

67kcodeGT_old · 9 inch rebound plate 67kcodeGT_old September 18, 2009 at 9:14 PM

Yup,those are ours and we are looking in to making the reinforcement plates also.

67kcodeGT_old · 9 inch rebound plate 67kcodeGT_old September 17, 2009 at 5:55 AM

Hi,if you would pictures of ours,send me a e-mail as they are to large to post here. greatcustoms2@comcast.net

Greg

Edited by - 67kcodeGT on 09/19/2009 03:59:26

67kcodeGT_old · 9 inch rebound plate 67kcodeGT_old September 15, 2009 at 9:28 PM

This could be interesting as we repop these and they look just like the OEM ones!

67kcodeGT_old · 9" rebound plates New just released 67kcodeGT_old August 11, 2009 at 5:28 AM

We have out first batch of the 9 " rebound plates being released.They are exactly like the OEM ones.They are $75.00 each,plus shipping.If you would like pictures,please feel free to send me a e-mail.I will try to down load pictures to the sight in a couple of days.If someone can help me to post pictures faster,please let me know.You can also contact me at 1-586-463-7646.

Greg

67kcodeGT_old · its back 67kcodeGT_old July 18, 2009 at 5:52 AM

Not a hipo engine and door hinges need repair,no spring and pin.

67kcodeGT_old · 9 inch rebound plate 67kcodeGT_old July 18, 2009 at 5:44 AM

We are repoping these now and will be selling for less than $75.00,retail.

Edited by - 67kcodeGT on 07/18/2009 14:44:06

67kcodeGT_old · Wanted 65 Hipo axle bumper. 67kcodeGT_old July 13, 2009 at 4:44 AM

Is this like the one that you need? If so,I might have a extra one that I will sell.Let me know and I will look for you.

Greg

http://cgi.ebay.com/ebaymotors/9-i…alenotsupported

67kcodeGT_old · Wanted 65 Hipo axle bumper. 67kcodeGT_old July 12, 2009 at 5:01 AM

Hi,those are availible all the time,there is one on E-Bay right now.The plate that go one the body are done and have over 100 of them done,look for them to be sold by one of the venders.

http://cgi.ebay.com/ebaymotors/69-…alenotsupported

Greg

67kcodeGT_old · Wanted 65 Hipo axle bumper. 67kcodeGT_old July 10, 2009 at 5:20 AM

Snubber plate has been reproduced.Watch for the release of these from venders!

67kcodeGT_old · Wanted 65 Hipo axle bumper. 67kcodeGT_old June 24, 2009 at 6:08 AM

On 67's your car had to have a 9" rear end from the factory to have the differant stamped plate.

Greg

67kcodeGT_old · Wanted 65 Hipo axle bumper. 67kcodeGT_old June 22, 2009 at 6:13 AM

So,have these been reproduced or not yet? Have 2 67's that have them and would like to start making them if not.

67kcodeGT_old · Wanted HEH-T 67kcodeGT_old February 21, 2009 at 2:16 PM

Let me know if you still need one of these,as I have one listed on E-bay also.Came from my early hipo car 25 plus years ago.

Greg

67kcodeGT_old · Wanted 65 Hipo axle bumper. 67kcodeGT_old February 21, 2009 at 2:14 PM

Can some one tell me if these are being repoped,if not,I will get them done, as I have a 67 GT 390 and a 67 K code and can get the dimensions for them.

Greg

67kcodeGT_old

I still need to get to mine.67 GT ,Hipo,coupe.Clear water aqua.

[Blocked Image: http://i39.photobucket.com/albums/e166/bossshelby/Kcodesmall.jpg]