Posts by timjshanahan_old

Hello, I have a set of 3b21 and 3d18. They are complete and original. Give me a call if you want to work something out on them. THanks Tim 916-548-1255

I have a set of 7-b-23 smog Hipo heads that I would like to trade or sell buy. THanks

Hello, Kcoders, I'm looking for an NOS battery apron for a 67 mustang. Any help would be great. Thanks

I have a set of HIPO bare heads 7B3 with emissions, that I would like to trade for similar date(late 66 early 67) and non emissions. Anyone?

Good morning, I have a 1966 Mustang K-code coupe for sale. It has been completely disassembled and media blasted. The previous owner did not put a coat of primer on the car so there is a great deal of surface rust on the car. It will need to be blasted again. It comes with the original motor 6B (with vin stamp), although the heads are not correct 5A. It is a roller with the original 9 inch 3.5 rear end. It also comes with three transmissions, 1 65 toploader, 1 t-10 and a 5 bolt 3 speed. I don't think any of theses transmissions are original to the car. The car is a CA black plate car and is in very nice shape other than the surfase rust. I am selling everything for $8900. Come with your trailer and take it away. Thanks Tim 916-548-1255

Here are the part numbers, I am not aware of how to submit a picture, but the parts are NOS and still in the Ford boxes or wraps.

C5AZ-7D027-13 COVER

C4AZ-7D220-B GOV-BODY

C4AZ-7D028-A SPRINGS

C5AZ-7D022-C PISTON

C4AZ-7153-B TRANSMISSION GASKET SET

C2AZ-7153-A TRANS GASKET AND OIL SEAL KIT.

Tim

I think I have all of the needed parts to make a standard C-4 a C-servo C-4. They are NOS pieces and are still in the boxes. I purchased them on Ebay many years ago. If they can be of help, let me know. Thanks

I have a set of NOS 67 exhaust manifolds in the Ford Box. They are both C7 numbers, one has the cut outs for the smog one does not.

Thanks for the replies. Tim

Hello, I am putting together a 67 Hipo Convertible starting this summer and am looking for some advice. Did the 67 hipo's come with any options like power steering and AC? How about an automatic Transmission? I seem to remember that some of the 66's came with auto's and my 67 Shelby is a factory Auto, so I assume the auto is reasonable. Any other options? BTW, is the driveshaft the same length on a 67 hipo with auto as the 66 hipo with auto? Thanks

Tim

I have a few parts that I will be letting go of over the next couple of weeks. Let me know if you are interested. Thanks

1) One set orginal Hipo Exhaust manifolds ($275)

2) Complete set of hipo 65 motor and frame mounts ($1K)

3) 66 Hipo 4speed Carb 6ZF-C ($850)

4) Rechrome 5A aircleaner ($350)

5) Water pump needing rebuild c4 number ($400)

6) 5C 4 barrel intake Manifold ($200)

7) 2 Hipo one early one later Rally pac restored 8K's ($750 each)

I will be placing these on Ebay over the next couple of weeks, so let me know if you need something. 916-548-1255. thanks Tim

Hello everyone, thanks for the interest in the fuel pump. It has been sold.

The air cleaner has 5A on the bottom of it. I have two or three sets. I don't know what they are worth, so if you are interested, give me a call or email me and we can discuss. 916-548-1255

I have a few parts for sale. I am selling a complete set of 65 motor mounts. Everything needed to mount your hipo motor to your Mustang. I also have a completely rebuilt 66 4sp Hipo carb for sale. I am looking for $1000 and $1200 respectively. I will also be selling 2 aluminum hipo waterpumps, one rebuilt, one not, also an original hipo fuel pump, not rebuilt but working when removed. Lastly, I have a set of original hipo exhaust manaifolds that I will sell. Almost forgot, I also have a complete rechromed original set of valve covers and aircleaner(top and bottom). Thanks Tim.

Given that there are multiple items, answering questions in one posting can be confusing. Please call me at 916-548-1255. Thanks Tim.

The carb does not have a date code as it doesn't have a tag on it. It is in very good shape and was removed many years ago from a running car. I think $850 will be my price as a buy it now, otherwise, I'll be selling it on ebay with no reserve, so you might be able to get a better deal on it. Thanks Tim.

Wow, from the looks of my previous post, my Saint Patricks Day got started very early this morning. Here is what I meant to type. Sorry for the typos.

I have a complete set of hipo motor mounts that I will be placing on Ebay this weekend. I also have an E65 hipo fan blade as well as a 66 hipo 4speed carb that I will also be placing on ebay. If you have interest in these parts let me know before they are placed on ebay. Thanks Tim

I have a complete set of hipo motor mounts that I will be placing on Ebay this weekend. I also have a e65 hipo fan and a 88 hipo carb that I will also be placing on ebay. If you have interest in these parts let me know before they are plave on th ebay. Thanks Tim

Can anyone tell me the difference in the 67 hipo exhaust manifolds from those of the 65-66 manifolds? Also, do they have a different h-pipe? I have a set of 67 manifolds that I want to put on a 67 GTA, is there a 67 h-pipe or can I use any hipo h-pipe indifferent to the year? Thanhs guys. Tim

Thanks, I saw it. Tim