Very nice; keep'em coming.
Posts by round2K_old
-
-
I know there is one other thread beside this one, but danged if I can find it. I was asking that same question about SJ cars recently:
-
Marv sells them.
-
Thanks Murf. I emailed Jim and he responded promptly. $40 including shipping.
-
Did 69 302s have a big damper?
-
If you check in Bob Mannel's book you will see a well detailed photo of the various valves Ford was supplying. I found mine in the wrecking yard on a 64 F series pick up with a 390.
-
I seem to recall that ebay car as having been in Florida.
-
Thanks to everyone that has posted on this inquiry. If you have not had a chance to list your shifter as angled or curved lever that would also be helpful. Thanks, again.
-
It would be great to have a one owner car and know the car's history. I imagine the Connelly hides would have been custom made.
-
You really don't have a choice with the evolution of fuels; get the hardened seats.
-
It will be interesting to see how it faires at BJ. Pretty car, but it looks like it needs a little elbow grease to make it happy.
-
You are correct on the clamp being a distinguishing feature. We believe this is an original Arvinode resonator on an early convertible that was photographed at the K Day show. It is thicker and shorter than the standard dual resonator. It is missing the appropriate band clamp to hold it in place.
[Blocked Image: http://img116.imageshack.us/img116/937/resonatorxt7.jpg]
-
When I see a car like this for sale I always wonder who ended up with the original engine parts? Machine shop employee, restoration shop, the PO?????
-
Without advocating that you break the law
:People with one good plate have been known to buy the second one from this company, but you need an out of state shipping address for CA.
http://www.licenseplates.tv/?gclid=CLLExIyU-Y8CFScXagod-wMPKw
-
Scott Drake produces them in both colors. There are a lot of early cars running around with the darker color and it is incorrect.
-
Troy - I love that reflection you have in the convertible picture!
-
I have a couple of extra hood latches that are left over from a bunch of parts that I had Steve Gregori phosphate for me. $40 each.
[Blocked Image: http://img139.imageshack.us/img139/7058/latch04wy6.jpg]
[Blocked Image: http://img139.imageshack.us/img139/4083/latch01ov1.jpg]
[Blocked Image: http://img232.imageshack.us/img232/7204/latch03jw2.jpg]
-
No disrespect intended, but it sounds like it will be a big ugly cap that looks like someone painted it when you're done.
-
You might want to post this over on the Vintage Mustang Forum to hit a broader audience.
-
64 ½ -66 Dash Knob Set – Get rid of those old dull knobs! $15 gets all of these:
Wiper Switch Knob C5ZZ-17513A
Radio Knob Set C4AZ-28827/30A (Unopened Scott Drake items)
Instrument SOLD
64 ½ -65 Wiper Switch, Single Speed w/Washer C5ZZ-17A553CR – New repro in box: $15 (Sacramento Mustang)
64-66 Trunk Lock Cylinder Sleeve – C5ZZ-6543603-B $10 (Unopened Scott Drake)
64-65 289 Hipo Crankshaft Timing Gear – S351 Cloyes new in box, with hatchet pin hole. $5 SOLD
289 High Volume Oil Pump Drive, Melling IS-68 new in box. $5 SOLD
Backing Plate T-bolts, AMK, total of 8. $5 SOLD
64-66 Master Cylinder Pushrod, 6 cylinder cars. NOS Ford. Gold cad with some light surface rust. C50Z-2143-B $5
64-66 Tail Pipe, NOS Ford C5ZZ 5255G. Light surface rust as is typical. Ford script parts tag intact $15
64 ½ - 65 Wiper Arm Shafts. Early shafts for cars with screw-type wiper arm bezels. Used, but in very good condition from a California car. Left and right; C5ZZ-17567-B and C5ZZ-17566-B. $20 for pair.
Will ship any way you prefer; slow boat or priority.
