Can anyone enlighten me about the wheels on this particular car? They don't look stock, but suit the car well.
Thanks. Phil.
Can anyone enlighten me about the wheels on this particular car? They don't look stock, but suit the car well.
Thanks. Phil.
Thank you.
The rubbers that the hood rests on have horizontal lines on one edge and plain on the other. Do the lines face in towards the engine bay or out towards the fender edges?
Thanks. Phil.
Can someone tell me the reason for the tape on the inside of the air exractor vents(F/ and what sort to use as replacement? Also exactly where does it position.
Thanks. Phil.
Thanks, Guys. Sorry to be a pain. Auto-electrics not my strong field!
Phil.
The triple plug I referred to is the accessory feed wire, coming from the smaller fuse at the top of the fuse block(the windshield washer wire also plugs into this one). It hangs in the clip on the front of the air vent. I hope I'm on the right track! Also, does the green/red wire that comes out of the radio next to the black wire also have an extension wire attached?
Is it a plain black one?
Fred,
Are they available for purchase or do I make one?
I have replaced the underdash wiring and all connects up except for the radio wires. The power lead doesn't meet up with the 'three pronged' accessory feed, falling a few inches short. Is there a jumper wire of extension lead I should be using? I can't seem to work it out from the Jim Osborn diagram I have. Does anyone have a clearer version?
Thanks. Phil.
Can some one tell me what colour, if any, should the transmission crossmember should be on a 11/64 build San Jose f/bk?
Thanks. Phil.
I have an Australian delivered 66 c code coupe. Ford Australia imported 161 66 coupes, converted them to right hand drive, and sold them brand new throughout Oz. Mine was built in December 65 and sold in January 66. I'm the second owner. Phil.
I have some 3m caulking compound strips and was thinking of using that. Any thoughts anyone? Phil.
Thanks everyone for their help. Another mystery solved!
Thanks also Fred for tracking one down for me.
Best regards, Phil.
Ah hah! The case of the missing holder!! Anyone know if these can be bought separately anywhere?
Yes, I have the manual, but the picture is not clear as to whether the can fits straight into the hole in the vent, or if something should be in the hole to accept the can. The can I purchased is smooth on top and has no way of attaching to the vent.
Can someone tell me how the indicator flasher can attaches to the fresh air vent on 65 f/b?
Thanks. Phil.
Does the extension trim under the roof rail weatherstrip retainer(f/b)have sealer between the trim and body? I've seen that there is sealer between the retainer and the trim, but not sure of between trim and body. San Jose built 65 fb
Thanks. Phil.
Thanks, guys.
Phil.
Does anyone know how to keep new heater/defroster tube from sliding off new platsic ducts? The hose sits on the duct when it is in place, but I'm sure it would vibrate off when the car is in motion. Any tips greatly appreciated. Phil.
Welcome Ashley and good luck on the K hunt! Phil.