Posts by KBOB_old

Looking at the pic of your Alt pulley I did not know that they ever stamped them in a straight line.

I also thought that the "H" was not stamped perfectly on the originals, The lower right corner is dropped and did not imprint correctly.

Maybe some of our fellow members could shed some light?

Bob

Thanks for the advice, It looks like my car will fit with about 8 inches to spare on both ends.

I use an open trailer most of the time but it would be nice to have the option of enclosed for security reasons.

Thanks to all for your input!

Bob

I am looking at purchasing a new enclosed 8.5 x 16 trailer.

Has anyone tried hauling their Fastback in one of these?

I know it will be tight but I just sold my 20' because it scrapes going down my driveway and the 16 wont.

Thanks!

Bob

Do you need the whole assembly?

I have a nos (without the box) clock movement, no face or arms.

I have it as a spare in case one of my rally pac clocks quit.

let me know if that would help.

Bob

My other fastback is an A code Shelby clone with a T5 5 speed in it.

My problem is that 4th and 5th are really hard to engage/disengage.

1st 2nd and 3rd are fine.

I believe it has a stock shifter in it.

Any ideas?

Thanks!

Bob

Are those shoulder belts? I would love to see some close ups of the mounting points as I am considering doing this to my fastback.

Thanks!

KBOB

Thanks for the photo speegle, that is where my cable comes out but the angle of the cable made me think that possibly this was not the right hole. The hole above it looks like it has been drilled instead of punched so maybe a previous owner had other ideas.

Thanks to all for your help!

Bob

The car was built in Feb 1965 at the San Jose plant.

I have that hole by the acc linkage but I also have one that is higher up.

Thanks for the help!

Bob

My K fastback has what looks like two places that the choke cable could come out of the firewall.

Does anyone have photos of their firewall?

Also is there suppose to be a grommet where it exits the firewall?

Many thanks!

Bob

That's good to know considering how much those early lids go for.

The car is a San Jose built car if that makes any difference.

Thanks for the help!

Bob

I have an early (Feb 15th 1965) K Fastback and I need the following;

Early style air cleaner lid, Alternator pulley, original choke cable.

The previous owner restored this car awhile back and replaced these items with "shiny new ones".

Thanks,

Bob