Hi, need 4V cast iron intake, C6OE 9425 B dated 5J1 to 5J30.
Please help. WC
Posts by wmcurryjr
-
-
Hi, need 4V cast iron intake C6OE9425B dated between 5J1 and 5J30.
Please help. WC
-
Aftermarket sheetmetal was used on the floors and quarters by somebody before I bought it. I'm sure it would do but for a K code like this, I was going to scrap it all and replace is with NOS equipment. That's why I bought all those parts. Wallace
-
These have no depressions in them so are the Late version for 1968. Thanks, WC
-
Quote from Donsk65
I have a used set of 65 k front springs, You can have for $75.00 Don in Ca.
Don,
I will buy the front coils for your K car for $75. Let me know,
WC
-
1965 K Fastback, Black exterior, black interior, Deluxe pony interior car. This is a project car with all 3 VIN# on the car. The car is rust free but rough and will need to be restored.
I have all of the unrestored interior including rear uncut fiberglass fold down parts and uncut trap door.
Original matching drivetrain with the car including vin stamped block and 4 speed toploader (HEHBX). Restored 4 speed shifter with back up light. Original k driveline. Original 9 inch with tag and correct snubber. It is a June 2, 1965 car. The only thing not original are the hipo 5C18 matching heads and the harmonic balancer which is a service replaced C8 one.
The block is 0.020 over and the engine has been rebuilt and balanced but not fully assembled. Heads have been rebuild with hardned seats. Correct rebuilt fuel pump, rebuilt distributor,rebuilt carb(Pony carbs), rebuilt correct water pump, intake, etc. Rods, crank, cam, and main caps are all there and original. I have all the specifics on the rebuild and it was done right.
It is an original disc brake car.
It has been for sale before pending job transfers but they have all fallen through until now. I finally have a job and can't take it with me.
I am asking $25K or reasonable offer for the car with the matching rebuilt original drivetrain. It is in the registry.
I will be selling separately the following parts: I am willing to include some of these parts with the car if a descent arrangement can be made.
-OEM Restored 4 speed San Jose Radiator dated 2 65
-NOS red oxide quarter panels
-Nos black r/l fenders
-Pair of rust free doors
-NOS dual exhaust rear valance
-NOS front valance
-NOS radiator support
-One piece fastback/coupe floor pan from dynacorn
-NOS complete headlight assemblies
-Restored Underdash GT 1965 wiring and complete body harnesses.
-NOS Deluxe instrument dash cluster
-Original am/fm radio (works great)
-Original GT grill and fog lights
-NOS front and rear bumpers
-NOS tailight panel
-Mint restored 65 trunk lid
-NOS front red oxide cross member (sits below radiator support)
-Original 4 speed console
-NOS right and left trunk floors
-.... and many more NOS and original parts acquired for the car.
Buyer of the car will have first shot at all these parts which are not included in the price of the car and rebuilt engine. Anything left over will be offered to everyone else. Again, I will work with the buyer with these parts if some agreement can be made.
Email me for pics of the car, engine, etc at wallaceandkaren@yahoo.com or call me after 5pm at 785 259 4801
To all those who have tried to buy the car before and wanted a call when I did decide to sell it, I'm sorry but I forgot your names and numbers.
Finally, I am open to any respectful comments on the listing especially if you disagree with what I am asking. Just be descent!
Thanks, Wallace
-
Hi,
I have a near perfect set of original, early 1968 date coded Marchal Fog lights removed from a 1968 GT500. They would also work on a 1968 GT/CS which is why I bought them.
I have since sold the GT/CS and have these around. They include the correct housing, reflector, bulb, wiring, and hardware. They are ready to bolt in.
They are rare and difficult to find in this condition. I am asking $2000 or reasonable offer for them. I am open to offers but paid a similar amount when I bought them.
If you have an early 68 Shelby, or California Special/High Country special that would have come with Marchals then these would work great.
Let me know by email at wallaceandkaren@yahoo.com or call me at 785 259 4801. Thanks, Wallace
-
Hi,
I have a 1968 GT500 underdash OEM wiring harness for sale. It is original, uncut and in great shape.
$200 or best offer. Email me at wallaceandkaren@yahoo.com or call me at 785 259 4801 if interested.
Thanks, Wallace
-
Hi,
I have a pair of Late 1968 Coupe NOS red oxide quarter panels without the depressions for sale.
$1,000 plus shipping. Email me at wallaceandkaren@yahoo.com or call me at 785 259 4801 if interested.
Thanks, Wallace
-
Hi,
I have a pair of rust free 1967-68 Deluxe interior doors for sale. In great shape without any rust issues.
$800.00 for the pair plus shipping.
Email me at wallaceandkaren@yahoo.com or call 785 259 4801 if interested.
Thanks, Wallace
-
Hi,
I have a 1965 original 4 speed FOMOCO San Jose Radiator for sale. Hard item to find.
Markings are as follows:
C4ZE G2 W-MO 6 65.
Great shape. Will need to be rebuilt.
$800.00 obo plus shipping. Email me at wallaceandkaren@yahoo.com or call 785 259 4801 if interested.
Thanks, Wallace
-
Hi,
I have a C5OE rebuilt HIPO head dated 6A31 and a C8ZE rebuilt service replacement head for sale.
I bought them as a set and I was going to use them on my motor but found another set closer in dates.
They have been rebuilt but not run. I don't know the specifics of the build but know they were not ported. They came on a rebuilt K motor I had bought.
I will sell the non matching set for $1000. Prefer to sell as a pair. Email me at wallaceandkaren@yahoo.com or call me at 785 259 4801.
Thanks, Wallace
-
Hi, just finished restoring my 66 Mustang convertible and seem to be having trouble.
The AMP GAUGE is bouncing around and going crazy while I drive. I replaced the Voltage regulartor with the restoration and the alternator is rebuilt.
Could it be a ground issue with the regulator? Would the gauge be bad? It worked find before the restoration.
If somebody could help, please let me know. Email at wallaceandkaren@yahoo.com
Thanks, WC
-
Would like first shot at your C6OE 9425 B 5K25 4V intake. Let me know,
Thanks,Wallace
-
Eddie,
I could use the C6OE 9425 B 5K25 intake. Please let me know .
Thanks, Wallace
785 259 4801
-
Hi,
Made a big mistake. I am actually looking for a C5AE 6015 E 289 block and heads with 4V intake dated
5H, 5J, or 5K.
Can anybody help? Let me know.
Wallace
785 259 4801
-
Hi,
Made a big mistake. I am actually looking for a C5AE 6015 E 289 block and heads with 4V intake dated
5H, 5J, or 5K.
Can anybody help? Let me know.
Wallace
785 259 4801
-
EDDIE,
If you're out there email me at wallaceandkaren@yahoo.com. I would like to buy one of your intakes.
Wallace
785 259 4801
-
Hi, I'll take the air cleaner. Is there a date on the base? Let me know. I want first dibs if possible. thanks, Wallace
785 259 4801
email me at wallaceandkaren@yahoo.com
-
Jeff,
I can't find it. Do you have the item # that I can reference? Let me know, Wallace