Posts by RPM_old

RPM_old · Need nice RH Exhaust manifold RPM_old August 10, 2009 at 6:20 PM

Jim,how bad is it as I have a good repair guy for cast iron?

RPM_old · Carb Identification RPM_old August 7, 2009 at 5:59 PM

Do a search of the forum and you should be able to come up with all the answers your looking for.

RPM_old · third member bracket RPM_old August 5, 2009 at 6:49 AM

I've got both years for 65-66

RPM_old · Alternators RPM_old August 4, 2009 at 5:46 PM

Waht is the cost and are they Autolite stamped?

RPM_old · 65 Hipo angle mount brackets RPM_old August 3, 2009 at 6:17 PM

What did you do about the stud in bottom as they look real nice?How close is it to original?

RPM_old · For Sale:65 Hipo Motor Mounts RPM_old August 2, 2009 at 6:55 AM

Have half a set of 65 Mustang motor mounts.Have the complete right side mount and half top left side.Only missing the left bottom steel part.Will take $500 complete?

RPM_old · rear spring markings RPM_old August 1, 2009 at 3:26 PM

Those are great pics of the June 65 car but why are the dots on the bottom springs light blue?

RPM_old · rear spring markings RPM_old July 30, 2009 at 6:51 PM

Did both spring have the same two spray marks?

RPM_old · Wanted:NOS Running Horse Emblems RPM_old July 30, 2009 at 6:37 PM

The bad part is I still need a set?

RPM_old · 9" rear end vent fitting?? RPM_old July 30, 2009 at 4:35 PM

If you happen to know the part number fill us in!

RPM_old · rear spring markings RPM_old July 30, 2009 at 2:45 PM

Were these spray dots on all the springs they used on the Mustangs or just in certain plants?I'm looking for info on what would be correct for early Dearborn car?

RPM_old · Wanted 3623S Carter X Fuel Pump RPM_old July 27, 2009 at 8:30 PM

Reply sent to your e-mail as I have one.

RPM_old · Rear leaf springs RPM_old July 16, 2009 at 11:41 AM

Since this car was San Jose plant built and I've seen these paint colors on other Shelbys if any other plants have the same spring?Like Eaton if they made all the springs for Ford put the same paint marks on all the springs then send them out to the plants like Dearborn for assembly line install?

RPM_old · Rear leaf springs RPM_old July 15, 2009 at 7:35 AM

What plant was your car built at Mad4Hipo's?

RPM_old · Drive Shaft Markings and Engine Rebuild RPM_old July 5, 2009 at 9:09 PM

Just telling it like it is but I see you didn't have anything to add to facts on this perticular subject other then popping off behind a computer across the other side of the country!...Try taking your own advice

RPM_old · Drive Shaft Markings and Engine Rebuild RPM_old July 5, 2009 at 7:00 PM

The point being again that you should keep your nose on your own face was how the post got twisted unless there is something to do with fact about these cars!

RPM_old · Drive Shaft Markings and Engine Rebuild RPM_old July 4, 2009 at 9:31 PM

Getting the fine points of parts and marks of these cars is important if you have someone willing to be a man and show or tell you but LOOK out if your black listed or black balled as I've been on occasion as you'll have remarks removed,items for sale removed and people cut you out to sell same part or questions NOT answered.It's been a click from day one and still is!..jr.S don't sweat it as noone knows all and really doesn't matter when you think about it because someone smarts off or doesn't know when to shut their mouth but that's the difference in class as facts are the facts

RPM_old · Drive Shaft Markings and Engine Rebuild RPM_old June 28, 2009 at 4:46 PM

I appreciate the info and applaud your effort on your car!

RPM_old · Drive Shaft Markings and Engine Rebuild RPM_old June 27, 2009 at 8:02 PM

jr.s,which of the NPD stores did you get that carpet as it looks like it fits well and I need some for my 64.5 coupe?...Thanks

RPM_old · 65 Rear End Snubber Size RPM_old June 25, 2009 at 8:10 PM

Can anybody tell me the size in inches of early 65 pinion snubber?I believe it's 2 5/8th's of an inch but not sure?I know 66 is thicker