Posts by RPM_old

RPM_old · Another part I need... RPM_old April 4, 2008 at 8:44 AM

I certainly do with NOS Ford insulators as well.

RPM_old · Alternator Restoration? RPM_old March 31, 2008 at 5:39 AM

RichardP,what is the cost of rebuild and can you provide contact info on this guy?Shouldn't be alot of cash to do as brushes,cleaning and occasional armature turning is about all that are done to rebuild one other then checking charging.

RPM_old · NOS HiPo Air Cleaner RPM_old March 13, 2008 at 5:20 AM

I've got an early July 1964 built car and it has the chrome double hump air cleaner on it.

RPM_old · 63 hipo block/heads needed RPM_old March 12, 2008 at 3:45 PM

I've got a pair of 3M24/4A14 C3OE heads I'ld like to trade for a set of 3G? or 3H1 paired heads?

RPM_old · NOS hatchet weight RPM_old March 6, 2008 at 6:58 AM

Someone on this site was selling repops for $40

RPM_old · Removed RPM_old March 5, 2008 at 2:54 PM

Is this the one that was bought in Charlotte last year?

RPM_old · Replacement carpet fit and quality RPM_old February 27, 2008 at 5:14 PM

I've seen a lot of posts about the fastback Mustang carpet and wanted to ask to see if anyone had a line on a quality fitting 64.5 coupe carpet? Cars floor is black and hoping it's going to be easier?

RPM_old · FOR SALE IN THE SPRING RPM_old February 22, 2008 at 2:35 PM

What cars bring at B-J Auction has really nothing to do with what they are worth.It's worth on a givin day what someone will pay for it on that day.B-J Auction is what the letters imply they are with high dollar admission,high dollar commission with plenty of drinks and fluff girls for the high rollers!

RPM_old · Wanted:NOS Running Horse Emblems RPM_old February 13, 2008 at 11:55 AM

Thanks for the heads up as they don't look bad but would rather have a set of NOS ones...Thanks

RPM_old · Hardened Pushrods?? RPM_old February 12, 2008 at 9:15 AM

Ford never made a hardened push rod per say.All parts have a certain Rockwell to meet specs but the stock push rods are soft.They bend easy and come apart easier.If you plan on good valve springs and twisting the motor above 6500 then buy good push rods.Crane and Comp Cams both make super nice chrome moly push rods and I know from experience twisting them over 10,000 rpm they will live!

RPM_old · Decode Radiator Question RPM_old February 10, 2008 at 10:17 AM

Can anybody tell me what C4ZE 8005 B1 tells me?The date code follows this but we already know what it is.

RPM_old · Wanted:NOS Running Horse Emblems RPM_old February 9, 2008 at 5:19 PM

Still looking for a NOS pair?

RPM_old · Pictures of 1966 Sapphire Blue RPM_old February 7, 2008 at 9:49 AM

The six digit code means it was special order but what was special about it as it looks like a 66 GT K Mustang?

RPM_old · Wanted:NOS Running Horse Emblems RPM_old February 4, 2008 at 5:47 PM

Am looking for a set of NOS MINT C4 part numbered running horse fender emblems for 65 Mustang?Need pair

RPM_old · 64 Fairlane K Engine RPM_old January 19, 2008 at 5:18 PM

How much are you asking for motor and trans or are they separate?The question of build date was for 63Kcode?

RPM_old · 64 Fairlane K Engine RPM_old January 18, 2008 at 7:04 PM

What is the build date of your car?

RPM_old · Wanted:Air Duct Pull RPM_old January 16, 2008 at 7:07 AM

Anybody have an early drivers side air duct pull knob with the "A" stamped on it that is still nice?

RPM_old · Water Pump rebuild?? RPM_old January 8, 2008 at 5:17 PM

I could use a early C3 part numbered one with Jun.July or Aug. on it and don't really need to be Hipo.Also could use a 7/64 pump also the same?

RPM_old · WANTED:65-66 GT Sway Bar RPM_old January 8, 2008 at 7:01 AM

Looking for a 65 or 66 Mustang GT front sway bar with brackets?Any help appreciated

RPM_old · carb spacers RPM_old January 3, 2008 at 9:50 AM

The aluminum intake motors didn't have spacer under carb.They had a thick gasket that had 4 plastic washers built into the gasket to keep carb off base of intake and aligned the carb studs.Kinda hard to find.