HI FRED. I RECEIVED MY FUEL PUMP TODAY,IT LOOKS SUPER,I WANT TO THANK YOU FOR ALL YOUR WORK,AND A SHARP EYE FOR DETAIL.THANK YOU JIM<img src=images/icon_smile_cool.gif border=0 align=middle>
Posts by mustangj_old
-
-
FRED, THANK YOU FOR THE INFO, AND A HAPPY BIRD/DAY ,AND AGAIN THANK YOU FOR ALL YOUR WORK ON THE PUMPS. JIM<img src=images/icon_smile.gif border=0 align=middle>
-
A BIG THANKS TO FRED,FOR ALL YOUR TIME AND SHARP EYE FOR DETAIL. THANKS JIM<img src=images/icon_smile.gif border=0 align=middle><img src=images/icon_smile.gif border=0 align=middle>
-
i bought mine, from california mustangs,the trunk mat was a nice fit,no trimming.jim<img src=images/icon_smile_cool.gif border=0 align=middle>
-
i bought the car new in 09/64,i'm the same owner.
-
here is all the marking off the pump. Carbureter 0-1719 l14a the arm is mark 177-220. jim
-
hi,need some information, i have off my 65 hi po a 3939s fuel pump,that needs to be rebuilt,i would like to know what is the pump worth? can any one help with this. thanks jim
-
HI FRED.YOU DID SEND ME THE INFO,BUT SOME HOW IT WAS ERASED? IF YOU OR SOME ONE COULD UP DATE ME AGAIN,SORRY FOR THE TROUBLE. THANKS JIM
(FOR 3939S CRIMP FUEL PUMP REBUILDER)
-
hi.all the pumps look grate,but i have not seen a name or phone number,so i can get in touch with him (rebuilder) thanks for any help.jim
-
i have a 65/3939s crimp type pump off my car,needs to be rebuilt,can any one give me any information,who does. thanks jim
-
Hi. thanks for all the information,will give it a try. jim
-
hi.how do you load pictures to this site? (mustang Exchange) jim
-
THE HEATER UNIT IS OUT,NO PROBLEM GETTING IT OUT ,(AFTER EVERY ONE'S HELP).THE HEATER HOSE'S THAT ARE ATTACH TO THE HEATER CORE,I CUT THEM OFF, AND USE A CORK TO PLUG THEM,AND REMOVED IT,WORK GOOD,NO ANTI/FREEZE SPILLS,IN SIDE THE CAR THAT WAY.I DID ORDER THE GASKET KIT TO RE-SEAL THE HEATER BOX. THANKS JIM HAPPY NEW YEAR..
-
THANK YOU 2K JOE.JIM
-
can anyone tell me when dropping the heater housing,it looks like the fan motor goes with it,how hard is it going to be ,when installing the blower motor,and trying to align the 4 studs?
-
THANK YOU FOR ALL THE GOOD INFORMATION,WILL START ON IT SUNDAY.
-
jim.after doing what you say,will the complete heater box just drop down?
-
I need some help.the manual that i have ,shows.1,2,3 and its out.whats is the best way to remove the heater core? 1965 2&2 h.p. there are 11 spring clips around the box,how do you remove the upper one's and the right side clips?i can't really see them,let alone try to remove them.thanks you for any help. jim