Talked to Steve Volk last night, Steve is one of the principals of the Shelby American Collection and he had just spoken with Carroll and Carroll is planning, barring any health issues , on flying to Colorado this weekend for the Museum fundraiser. The Museums fundraiser normally held in December is now being held in the summer.
Check it out!
Jerry: I thought you were doing an R-Model. They didnt run fans on Race models, Hipo fans hit the oil cooler
Looking for 64 date coded front bumper. email me at jim@shelbyparts.com with price, description and pics.if possible
I have a place that does it in real cad bright email me at jim@shelbyparts.com and ill dig out the info. get ready for a minimum charge. as Charles said most shops are very big and they really dont want to mess with it
Just call me or Jesse at 920 434 3645 email is jim @shelbyparts.com
website is http://www.shelbyparts.com
I have a real nice Ford ring and Pinion for $150 i found in the back. real Ford ones are very hard to find
I found another set of good used retainers in my search for any oddballs. $50 set 920 434 3645
I have a set of Nascar micropolished Ford racing gears $225 run way cooler than stock. Cost to micro polish was $200
289 Hipo Dual Point distributor Fomoco. concourse restored Fomoco dual point distributor. This is a C5OF-E for the 289 High Performance K code engines but it was an over the counter option for all 289 Mustangs as well as Boss 302 Off Highway. This one is date code November 1965 if that matters. This is correct for all Shelby GT350 cars 1965-1967 as well. The restoration process includes total disassembly, hot tanking, tumbling and machining for that factory look, all new points and condenser, bushings and wire. Recurve to original Hipo specs using a calibrated Sun distributor machine. This is a great distributor and is ready to install in that GT350 or K code
$850 920 434 3645 http://www.shelbyparts.com
289 Hipo engine mounts 1965. brand new set of concourse reproduction 1965 K code angle mounts. Thse are correct for all 1964 ½ - 1965 and some early 66 289 Hipo Mustang engines. They are also correct for 1965 Shelby GT350 and some early 66 GT350s. We had these made since they are always screwed up. The welded in bolt was machined with the correct fine thread and the wide head. The steel is the correct gauge and has been laser cut , bent and welded to the proper shape. The entire parts has been shot peened , tumbled and oiled. We have to make a minimum of 5 sets of these to make it feasible financially and also meet the sheet metal requirements. We also don’t make them until we have orders for more than half the run so it may take as much as 6 months to get another run. Don’t miss a chance to get a set while they are available. 920 434 3645 http://www.shelbyparts.com
Looking for original parts only
seat track plates
late 64 dated bumpers - all considered
smooth seat back - no rips or problems, color doesnt matter
voltage regulator screw protectors
email me at jim@shelbyparts.com pics helpfull
I got a few emails on these but the guy that bought them stuck his hand up the old fashioned way and called me rather than wait until I sent pictures and measured the depth , diameter and got the brinnell tests back (-:
I may have a few odd ones but they arent new, I will post if I find them
They are sold, now Im trying to get a set Of NOS ones from a hoarder
I have a real nice set of used ones I took off a low mileage engine years ago. $50
I looked in to this. requires some serious tooling, deep draw type. very expensive and few plants want to mess with small runs like this. if he makes them properly it will be a plus if its priced correctly
I have an original 7AB large pulley for 67 GT350 and 67 K code and GT500 with AC and 67 7 Liter apps $500. We also have a concourse version of this we had made, superb reproduction with stamped 7AB , epoxy primered and dipped in black $250 Once they are gone thats it, too expensive to make! (920) 434 3645 Pics for the asking email me jim@shelbyparts.com
I made another minimum run of the intermediate angled steel engine mounts with the stud. This is a pair right and left. Made with the proper gauge steel, Fine thread machined stud. Correct bends. Shot blasted, Tumbled, bare steel or phosphate plated your choice $250 Pr. 920 434 3645 pics for the asking!
looking for cast aluminum cobra oilpan, says Cobra powered by Ford on the side, repop OK
manifolds are sold
